Package: linux-image-2.6-k7 Version: 2.6.17+2 Severity: minor Please reassign to correct package. All I know is upon shutdown -h, the screen, just before the "Power down" message, is left with lots of 1-1.1:1.0 cannot disable/reset/enable port 1(error=-108) or something messages.
If we, before shutdown -h, first umout our card reader and unplug it from the USB socket, we won't get the aforementioned messages on the lingering on the final power down screen, but see instead via dmesg various: sdc : sense not available. sdc : status=0, message=00, host=1, driver=00 sdc : READ CAPACITY failed. Buffer I/O error on device sdd, logical block 0 sdc: Mode Sense: 00 00 00 00 sdd:<3> 0:0:0:3: rejecting I/O to dead device unable to read partition table sdc: Write Protect is off sdc: assuming drive cache: write through Anyway, it is not every user who's monitor stays on after one's motherboard's power is off, so I might have seen messages others don't. -- System Information: Kernel: Linux 2.6.17-2-k7 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
