Frans Pop schrieb: > reassign 403630 linux-2.6 > retitle 403630 Hangs while detecting CD-ROM devices > thanks
>> After install I update the >> Kernel, but get problems booting it. It allways stop at detecting the >> cdrom-devices. (Kernel 2.6.18-3-k7 and 2.6.18-3-486). With the working >> kernel 2.6.17-2-486 ther is no CD-ROM device (there must exist hda and >> hdb) > > That sounds like a kernel problem. Reassigning to the kernel team. > Can you provide the exact messages you see on the console just before the > system hangs? Please provide as much context as possible. Now I discovered, that it is no system hang, it yust pause for 30s, and I was to impatient to wait wich leads to this bug-report. some examples for positions where the system pause: SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 hdb ATAPI 52 X DVD-ROM drive, 256kb Cache, UDMA(33) sd 0:0:0:0: atached scsi disk sda then pause for 30s and then continue with Attempting manual resume ... then it stops allways at Compaq touchscreen protocol output for additional 30s another example: SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: atached scsi disk sda hdb ATAPI 52 X DVD-ROM drive, 256kb Cache, UDMA(33) then pause for 30s and then continue with Attempting manual resume ... But everything was working now with the exception of taking a lot of time to boot, so I removed the 3c905 NIC. The result was that everything was working perfekt after the removal of the additional NIC. No pause during boot anymore. For me this Problem is solved now. best regards, Hubert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
