On Mon, Apr 16, 2007 at 12:42:35AM +0200, David Garabana Barro wrote: > This is the output of lspci for both cards (mainboard internal, and PCI): > > 01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RT8139 > Flags: bus master, medium devsel, latency 32, IRQ 201 > I/O ports at 8400 [size=256] > Memory at e6000000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > > 01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Giga-byte Technology GA-7VM400M/7VT600 Motherboard > Flags: bus master, medium devsel, latency 32, IRQ 193 > I/O ports at 8800 [size=256] > Memory at e6001000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2
hey David, Can you provide the output of 'dmesg' for both your working 2.6.16 and your failing 2.6.18? Also, can you test the 2.6.20 kernel in sid? It should install fine on an etch system. -- dann frazier -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
