[EMAIL PROTECTED] wrote: > On Mon, 2007-05-07 at 18:26 +0200, Tobias Stefan Richter wrote: > > * limiting to 10MBit-FD with mii-tool helped: no more > > errors, rsync works > > You might want to try 100MBit-HD, I've had similar issues with this NIC > chipset, and it came down to the implementation of it FD mode on > 100MBit. I tried it with 3 different manufacturers of switched, 2 > managed and one non-managed. Same results each time.
For me playing around with mii-tool helps. After setting the transmission mode to something else than 100FD, I can even let it autonegotiate back without causing trouble. The corrupt frames disappear and do not come back. A reboot however lets the trouble begin again. As stated in the original report, there were no problems with the kernel release before, so the problem should be solvable by software. > I've switch to a PCI NIC on for obvious reasons. But for me this might still be a good suggestion. Or I start some mii-tool voodoo in init.d. Thanks, tobias -- Tobias Richter LabPZ - AG Prof. Dr. P. Zimmermann TU-Berlin PN 3-2 Phone: +49-30-314-23016 Hardenbergstr. 36 Fax: +49-30-314-23018 10623 Berlin Germany http://atom.physik.tu-berlin.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
