linux-modules-extra-2.6_2.6.18-7+etch3.dsc to pool/main/l/linux-modules-extra-2.6/linux-modules-extra-2.6_2.6.18-7+etch3.dsc linux-modules-extra-2.6_2.6.18-7+etch3.tar.gz to pool/main/l/linux-modules-extra-2.6/linux-modules-extra-2.6_2.6.18-7+etch3.tar.gz redhat-cluster-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/redhat-cluster-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb redhat-cluster-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/redhat-cluster-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb redhat-cluster-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/redhat-cluster-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb redhat-cluster-modules-2.6-vserver-sparc64_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/redhat-cluster-modules-2.6-vserver-sparc64_2.6.18-7+etch3_sparc.deb (new) redhat-cluster-modules-2.6.18-5-sparc32_2.6.18+1.03.00-7+etch3_sparc.deb optional admin Redhat Cluster infrastructure modules for Linux 2.6.18 on uniprocessor sparc32 (sun4m) This package provides the Redhat Cluster infrastructure modules for the Linux kernel version 2.6.18 on uniprocessor sparc32 (sun4m) machines. (new) redhat-cluster-modules-2.6.18-5-sparc64-smp_2.6.18+1.03.00-7+etch3_sparc.deb optional admin Redhat Cluster infrastructure modules for Linux 2.6.18 on multiprocessor 64-bit UltraSPARC This package provides the Redhat Cluster infrastructure modules for the Linux kernel version 2.6.18 on multiprocessor 64-bit UltraSPARC machines. (new) redhat-cluster-modules-2.6.18-5-sparc64_2.6.18+1.03.00-7+etch3_sparc.deb optional admin Redhat Cluster infrastructure modules for Linux 2.6.18 on uniprocessor 64-bit UltraSPARC This package provides the Redhat Cluster infrastructure modules for the Linux kernel version 2.6.18 on uniprocessor 64-bit UltraSPARC machines. (new) redhat-cluster-modules-2.6.18-5-vserver-sparc64_2.6.18+1.03.00-7+etch3_sparc.deb optional admin Redhat Cluster infrastructure modules for Linux 2.6.18 on uniprocessor 64-bit UltraSPARC This package provides the Redhat Cluster infrastructure modules for the Linux kernel version 2.6.18 on uniprocessor 64-bit UltraSPARC machines. squashfs-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb squashfs-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb squashfs-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb squashfs-modules-2.6-vserver-sparc64_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-vserver-sparc64_2.6.18-7+etch3_sparc.deb (new) squashfs-modules-2.6.18-5-sparc32_2.6.18+3.1r2-7+etch3_sparc.deb optional admin Squash filesystem modules for Linux 2.6.18 on uniprocessor sparc32 (sun4m) This package provides the Squash filesystem modules for the Linux kernel version 2.6.18 on uniprocessor sparc32 (sun4m) machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. (new) squashfs-modules-2.6.18-5-sparc64-smp_2.6.18+3.1r2-7+etch3_sparc.deb optional admin Squash filesystem modules for Linux 2.6.18 on multiprocessor 64-bit UltraSPARC This package provides the Squash filesystem modules for the Linux kernel version 2.6.18 on multiprocessor 64-bit UltraSPARC machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. (new) squashfs-modules-2.6.18-5-sparc64_2.6.18+3.1r2-7+etch3_sparc.deb optional admin Squash filesystem modules for Linux 2.6.18 on uniprocessor 64-bit UltraSPARC This package provides the Squash filesystem modules for the Linux kernel version 2.6.18 on uniprocessor 64-bit UltraSPARC machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. (new) squashfs-modules-2.6.18-5-vserver-sparc64_2.6.18+3.1r2-7+etch3_sparc.deb optional admin Squash filesystem modules for Linux 2.6.18 on uniprocessor 64-bit UltraSPARC This package provides the Squash filesystem modules for the Linux kernel version 2.6.18 on uniprocessor 64-bit UltraSPARC machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. unionfs-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/unionfs-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb unionfs-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/unionfs-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb unionfs-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb to pool/main/l/linux-modules-extra-2.6/unionfs-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb (new) unionfs-modules-2.6.18-5-sparc32_2.6.18+1.4+debian-7+etch3_sparc.deb optional admin Unionfs modules for Linux 2.6.18 on uniprocessor sparc32 (sun4m) This package provides the Unionfs modules for the Linux kernel version 2.6.18 on uniprocessor sparc32 (sun4m) machines. . The unionfs driver provides a unification file system for the Linux kernel. It allows to virtually merge the contents of several directories and/or stack them, so that apparent file changes in the unionfs end in file changes in only one of the source directories. (new) unionfs-modules-2.6.18-5-sparc64-smp_2.6.18+1.4+debian-7+etch3_sparc.deb optional admin Unionfs modules for Linux 2.6.18 on multiprocessor 64-bit UltraSPARC This package provides the Unionfs modules for the Linux kernel version 2.6.18 on multiprocessor 64-bit UltraSPARC machines. . The unionfs driver provides a unification file system for the Linux kernel. It allows to virtually merge the contents of several directories and/or stack them, so that apparent file changes in the unionfs end in file changes in only one of the source directories. (new) unionfs-modules-2.6.18-5-sparc64_2.6.18+1.4+debian-7+etch3_sparc.deb optional admin Unionfs modules for Linux 2.6.18 on uniprocessor 64-bit UltraSPARC This package provides the Unionfs modules for the Linux kernel version 2.6.18 on uniprocessor 64-bit UltraSPARC machines. . The unionfs driver provides a unification file system for the Linux kernel. It allows to virtually merge the contents of several directories and/or stack them, so that apparent file changes in the unionfs end in file changes in only one of the source directories. Changes: linux-modules-extra-2.6 (2.6.18-7+etch3) stable; urgency=high . * Building against 2.6.18-5
Override entries for your package: linux-modules-extra-2.6_2.6.18-7+etch3.dsc - source devel redhat-cluster-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb - optional admin redhat-cluster-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb - optional admin redhat-cluster-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb - optional admin redhat-cluster-modules-2.6-vserver-sparc64_2.6.18-7+etch3_sparc.deb - optional admin squashfs-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb - optional admin squashfs-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb - optional admin squashfs-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb - optional admin squashfs-modules-2.6-vserver-sparc64_2.6.18-7+etch3_sparc.deb - optional admin unionfs-modules-2.6-sparc32_2.6.18-7+etch3_sparc.deb - optional misc unionfs-modules-2.6-sparc64-smp_2.6.18-7+etch3_sparc.deb - optional misc unionfs-modules-2.6-sparc64_2.6.18-7+etch3_sparc.deb - optional misc Announcing to [EMAIL PROTECTED] Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. You may have gotten the distribution wrong. You'll get warnings above if files already exist in other distributions. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
