Package: linux-image-2.6.22-1-k7 Version: 2.6.22-3 Severity: important
-- Package-specific info: ** Version: Linux version 2.6.22-1-k7 (Debian 2.6.22-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 15:15:55 UTC 2007 ** Tainted: PFSRMB ** Kernel log: bttv0: Hauppauge eeprom indicates model#0 bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok PCI: Enabling device 0000:00:11.5 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:11.5 to 64 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Enabling device 0000:00:0d.1 (0004 -> 0006) ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 16 (level, low) -> IRQ 19 bt878_probe: card id=[0x0], Unknown card. Exiting.. ACPI: PCI interrupt for device 0000:00:0d.1 disabled bt878: probe of 0000:00:0d.1 failed with error -22 usb 1-1: new low speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new full speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: USB Mouse as /class/input/input2 input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:10.0-1 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018C input: HID 0583:668f as /class/input/input3 input: USB HID v1.00 Joystick [HID 0583:668f] on usb-0000:00:10.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k EXT3 FS on hda3, internal journal PPP generic driver version 2.4.2 PPP BSD Compression module registered e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation NET: Registered protocol family 24 usbcore: registered new interface driver usbmouse drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usbcore: registered new interface driver usbkbd drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard KQEMU installed, max_locked_mem=258312kB. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] fuse init (API version 7.8) usb-storage: device scan complete scsi 3:0:0:0: Direct-Access Brother DCP-115C 1.00 PQ: 0 ANSI: 2 sd 3:0:0:0: [sda] Attached SCSI removable disk NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! device eth0 entered promiscuous mode audit(1185805388.928:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19 NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode ** Loaded modules: Module Size Used by nvidia 7249460 0 rfcomm 36824 0 l2cap 23232 5 rfcomm bluetooth 50148 4 rfcomm,l2cap nfsd 204912 13 exportfs 5952 1 nfsd lockd 61320 2 nfsd nfs_acl 3840 1 nfsd sunrpc 158972 9 nfsd,lockd,nfs_acl ppdev 8964 0 lp 11300 0 thermal 13768 0 fan 5124 0 button 8208 0 ac 5508 0 battery 10308 0 autofs4 20804 0 processor 31368 1 thermal cpufreq_userspace 4448 0 cpufreq_stats 5440 0 cpufreq_powersave 2112 0 cpufreq_ondemand 8204 0 freq_table 4832 2 cpufreq_stats,cpufreq_ondemand cpufreq_conservative 7176 0 ipv6 239460 25 sd_mod 27584 0 ext2 60936 1 fuse 42388 1 dm_snapshot 16868 0 dm_mirror 21312 0 dm_mod 52480 2 dm_snapshot,dm_mirror kqemu 123300 0 msp3400 29152 0 usbkbd 6912 0 usbmouse 5632 0 usbnet 18056 0 pppoe 13888 0 pppox 4168 1 pppoe e100 34444 0 bsd_comp 5824 0 ppp_generic 26580 3 pppoe,pppox,bsd_comp slhc 6464 1 ppp_generic joydev 9920 0 usb_storage 77440 0 usblp 13632 0 usbhid 26144 0 hid 25792 1 usbhid bt878 10808 0 snd_via82xx 27224 0 gameport 15304 1 snd_via82xx snd_ac97_codec 93220 1 snd_via82xx tuner 58024 0 tvaudio 22620 0 ac97_bus 2560 1 snd_ac97_codec snd_pcm_oss 39904 0 snd_mixer_oss 15872 1 snd_pcm_oss snd_pcm 72772 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_page_alloc 9800 2 snd_via82xx,snd_pcm snd_mpu401_uart 8384 1 snd_via82xx snd_seq_dummy 4036 0 snd_seq_oss 29760 0 bttv 166708 1 bt878 video_buf 23876 1 bttv firmware_class 9984 1 bttv i2c_viapro 8788 0 snd_seq_midi 8480 0 snd_seq_midi_event 7360 2 snd_seq_oss,snd_seq_midi snd_seq 46864 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 21380 2 snd_pcm,snd_seq ir_common 34500 1 bttv via_ircc 24788 0 snd_rawmidi 23264 2 snd_mpu401_uart,snd_seq_midi snd_seq_device 8012 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi compat_ioctl32 1664 1 bttv i2c_algo_bit 6212 1 bttv ide_cd 36896 0 cdrom 33184 1 ide_cd pcspkr 3392 0 psmouse 36432 0 irda 173180 1 via_ircc snd 48804 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device rtc 13144 0 btcx_risc 5064 1 bttv parport_pc 34212 1 parport 34312 3 ppdev,lp,parport_pc floppy 55332 0 serio_raw 7044 0 crc_ccitt 2432 1 irda soundcore 7840 1 snd ehci_hcd 31116 0 uhci_hcd 23376 0 b44 25868 0 tveeprom 15248 1 bttv i2c_core 24000 8 nvidia,msp3400,tuner,tvaudio,bttv,i2c_viapro,i2c_algo_bit,tveeprom via_agp 10304 1 firewire_ohci 16896 0 firewire_core 39424 1 firewire_ohci usbcore 125704 9 usbkbd,usbmouse,usbnet,usb_storage,usblp,usbhid,ehci_hcd,uhci_hcd sata_promise 12676 0 videodev 26944 1 bttv v4l2_common 16960 5 msp3400,tuner,tvaudio,bttv,videodev v4l1_compat 12868 2 bttv,videodev mii 5696 3 usbnet,e100,b44 agpgart 32264 2 nvidia,via_agp crc_itu_t 2432 1 firewire_core shpchp 31380 0 pci_hotplug 29568 1 shpchp ext3 122632 1 jbd 55784 1 ext3 mbcache 8580 2 ext2,ext3 ide_disk 16832 4 ata_generic 7876 0 libata 116848 2 sata_promise,ata_generic scsi_mod 137356 3 sd_mod,usb_storage,libata generic 5124 0 [permanent] via82cxxx 8964 0 [permanent] ide_core 114436 5 usb_storage,ide_cd,ide_disk,generic,via82cxxx evdev 9664 3 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:807f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR+ Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8235 PCI Bridge [1106:b168] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: dd000000-de7fffff Prefetchable memory behind bridge: dff00000-efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 46) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at d800 [size=128] Capabilities: <access denied> 00:08.0 RAID bus controller [0104]: Promise Technology, Inc. PDC20376 (FastTrak 376) [105a:3376] (rev 02) Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:809e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at d400 [size=64] Region 1: I/O ports at d000 [size=16] Region 2: I/O ports at b800 [size=128] Region 3: Memory at dc000000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at db800000 (32-bit, non-prefetchable) [size=128K] Capabilities: <access denied> 00:09.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T [14e4:4401] (rev 01) Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:80a8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 17 Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at dfef0000 [disabled] [size=16K] Capabilities: <access denied> 00:0d.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at df000000 (32-bit, prefetchable) [size=4K] 00:0d.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 19 Region 0: Memory at de800000 (32-bit, prefetchable) [size=4K] 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller [1043:808c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 4: I/O ports at b400 [size=32] Capabilities: <access denied> 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller [1043:808c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at b000 [size=32] Capabilities: <access denied> 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller [1043:808c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at a800 [size=32] Capabilities: <access denied> 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:808c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 18 Region 0: Memory at da800000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177] Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:808c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. A7V8X / A7V333 motherboard [1043:808c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 255 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at a400 [size=16] Capabilities: <access denied> 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50) Subsystem: ASUSTeK Computer Inc. A7V8X Motherboard (Realtek ALC650 codec) [1043:8095] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 20 Region 0: I/O ports at e000 [size=256] Capabilities: <access denied> 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV36.1 [GeForce FX 5700 Ultra] [10de:0341] (rev a1) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M] Expansion ROM at dffe0000 [disabled] [size=128K] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-k7 (SMP w/1 CPU core) Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-1-k7 depends on: ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-20 Yet Another mkInitRD Versions of packages linux-image-2.6.22-1-k7 recommends: ii libc6-i686 2.6-5 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.22-1-k7/postinst/depmod-error-initrd-2.6.22-1-k7: false linux-image-2.6.22-1-k7/postinst/create-kimage-link-2.6.22-1-k7: true * linux-image-2.6.22-1-k7/preinst/already-running-this-2.6.22-1-k7: linux-image-2.6.22-1-k7/preinst/initrd-2.6.22-1-k7: linux-image-2.6.22-1-k7/postinst/bootloader-test-error-2.6.22-1-k7: linux-image-2.6.22-1-k7/postinst/depmod-error-2.6.22-1-k7: false linux-image-2.6.22-1-k7/preinst/overwriting-modules-2.6.22-1-k7: true linux-image-2.6.22-1-k7/preinst/bootloader-initrd-2.6.22-1-k7: true linux-image-2.6.22-1-k7/postinst/old-initrd-link-2.6.22-1-k7: true linux-image-2.6.22-1-k7/prerm/removing-running-kernel-2.6.22-1-k7: true linux-image-2.6.22-1-k7/postinst/old-dir-initrd-link-2.6.22-1-k7: true linux-image-2.6.22-1-k7/preinst/elilo-initrd-2.6.22-1-k7: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-1-k7/preinst/abort-install-2.6.22-1-k7: linux-image-2.6.22-1-k7/prerm/would-invalidate-boot-loader-2.6.22-1-k7: true linux-image-2.6.22-1-k7/postinst/bootloader-error-2.6.22-1-k7: linux-image-2.6.22-1-k7/preinst/failed-to-move-modules-2.6.22-1-k7: linux-image-2.6.22-1-k7/preinst/abort-overwrite-2.6.22-1-k7: linux-image-2.6.22-1-k7/preinst/lilo-has-ramdisk: linux-image-2.6.22-1-k7/preinst/lilo-initrd-2.6.22-1-k7: true linux-image-2.6.22-1-k7/postinst/old-system-map-link-2.6.22-1-k7: true linux-image-2.6.22-1-k7/postinst/kimage-is-a-directory: Dear maintainers, the latest package of the linux-image cannot be installed, as it breaks during install. The main reason for this, is that the ramdisk )initrd.img-xxx) cannot be built during installation. And this cannot be built, because of an error in the /proc-system. So, please take a look at the log. I set this to "important", as of this bug the nvidia-kernel and nvidia-glx modules are no more usable, which inhibits rendering and acceleration for all users. So, please take a look to the stdout: ----------- snip --------- protheus1:~# LANG=C apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: libquicktime0 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 2 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. Do you want to continue [Y/n]? Setting up linux-image-2.6.22-1-k7 (2.6.22-3) ... Running depmod. Finding valid ramdisk creators. Using mkinitrd.yaird to build the ramdisk. yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal) mkinitrd.yaird failed to create initrd image. Failed to create initrd image. dpkg: error processing linux-image-2.6.22-1-k7 (--configure): subprocess post-installation script returned error exit status 9 dpkg: dependency problems prevent configuration of kqemu-modules-2.6.22-1-k7: kqemu-modules-2.6.22-1-k7 depends on linux-modules-2.6.22-1-k7 | linux-image-2.6.22-1-k7; however: Package linux-modules-2.6.22-1-k7 is not installed. Package linux-image-2.6.22-1-k7 which provides linux-modules-2.6.22-1-k7 is not configured yet. Package linux-image-2.6.22-1-k7 is not configured yet. dpkg: error processing kqemu-modules-2.6.22-1-k7 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: linux-image-2.6.22-1-k7 kqemu-modules-2.6.22-1-k7 E: Sub-process /usr/bin/dpkg returned an error code (1) protheus1:~# ----------- snap ----------- Thank you very much for youre help ! Best regards Hans-J. Ullrich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]