Your message dated Wed, 2 Jul 2008 17:13:27 +0200
with message-id <[EMAIL PROTECTED]>
and subject line re: kernel-2.6.18: USB keyboard don't work After press
Num/Scroll/Caps lock
has caused the Debian Bug report #459587,
regarding kernel-2.6.18: USB keyboard don't work After press Num/Scroll/Caps
lock
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
459587: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=459587
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: kernel-2.6.18
Version: linux-image-2.6-k7
Severity: important
-- System Information:
Debian Release: 4.0
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-1-mppc
Locale: LANG=ru_UA.UTF-8, LC_CTYPE=ru_UA.UTF-8 (charmap=UTF-8)
dmsg:
1.
ohci_hcd 0000:00:02.0: urb f6acdf40 path 4.1 ep1in 5e160000 cc 5
--> status -110ohci_hcd 0000:00:02.0: urb dfc8e740 path 4.1 ep2in
5e160000 cc 5 --> status -110ohci_hcd 0000:00:02.0: urb dfc8ed40 path
4.2 ep1in 5e160000 cc 5 --> status -110usbhid 1-4.1:1.0: retrying intr
urb
2.
usbhid 1-4.1:1.1: retrying intr urb
3.
usbhid 1-4.2:1.0: retrying intr urb
4.
ohci_hcd 0000:00:02.0: urb f6acdf40 path 4.1 ep1in 5e160000 cc 5
--> status -110ohci_hcd 0000:00:02.0: urb dfc8e740 path 4.1 ep2in
5e160000 cc 5 --> status -110ohci_hcd 0000:00:02.0: urb dfc8ed40 path
4.2 ep1in 5e160000 cc 5 --> status -110usbhid 1-4.1:1.0: retrying intr
urb
5.
usbhid 1-4.1:1.1: retrying intr urb
6.
ohci_hcd 0000:00:02.0: urb dfcea1c0 path 4 ep1in 5f160000 cc 5 -->
status -110
7.
hub 1-4:1.0: transfer --> -110
8.
usbhid 1-4.2:1.0: retrying intr urb
9.
ohci_hcd 0000:00:02.0: urb f6acdf40 path 4.1 ep1in 5e160000 cc 5
--> status -110ohci_hcd 0000:00:02.0: urb dfc8e740 path 4.1 ep2in
5e160000 cc 5 --> status -110ohci_hcd 0000:00:02.0: urb dfc8ed40 path
4.2 ep1in 5e160000 cc 5 --> status -110hub 1-0:1.0: state 7 ports 10 chg
0000 evt 0010
10.
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] =
0x00030100 PESC CSC PPS
11.
hub 1-0:1.0: port 4, status 0100, change 0003, 12 Mb/s
12.
usb 1-4: USB disconnect, address 8
13.
usb 1-4.1: USB disconnect, address 9
14.
usb 1-4.1: usb_disable_device nuking all URBs
15.
usb 1-4.1: unregistering interface 1-4.1:1.0
16.
usbdev1.9_ep81: ep_device_release called for usbdev1.9_ep81
17.
usb 1-4.1:1.0: uevent
18.
usb 1-4.1: unregistering interface 1-4.1:1.1
19.
usbdev1.9_ep82: ep_device_release called for usbdev1.9_ep82
20.
usb 1-4.1:1.1: uevent
21.
usb 1-4.1: unregistering device
22.
usbdev1.9_ep00: ep_device_release called for usbdev1.9_ep00
23.
usb 1-4.1: uevent
24.
usb 1-4.2: USB disconnect, address 10
25.
usb 1-4.2: usb_disable_device nuking all URBs
26.
usb 1-4.2: unregistering interface 1-4.2:1.0
27.
usbdev1.10_ep81: ep_device_release called for usbdev1.10_ep81
28.
usb 1-4.2:1.0: uevent
29.
usb 1-4.2: unregistering device
30.
usbdev1.10_ep00: ep_device_release called for usbdev1.10_ep00
31.
usb 1-4.2: uevent
32.
usb 1-4: usb_disable_device nuking all URBs
33.
ohci_hcd 0000:00:02.0: shutdown urb dfcea1c0 pipe 40408880
ep1in-intr
34.
usb 1-4: unregistering interface 1-4:1.0
35.
usbdev1.8_ep81: ep_device_release called for usbdev1.8_ep81
36.
usb 1-4:1.0: uevent
37.
usb 1-4: unregistering device
38.
usbdev1.8_ep00: ep_device_release called for usbdev1.8_ep00
39.
usb 1-4: uevent
40.
hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status
0x100
41.
ohci_hcd 0000:00:02.0: suspend root hub
42.
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0010
43.
ehci_hcd 0000:00:02.1: GetStatus port 4 status 001803 POWER sig=j
CSC CONNECT
44.
hub 2-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
45.
hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status
0x501
46.
ehci_hcd 0000:00:02.1: port 4 full speed --> companion
47.
ehci_hcd 0000:00:02.1: GetStatus port 4 status 003001 POWER OWNER
sig=se0 CONNECT
48.
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000, resume root
49.
ohci_hcd 0000:00:02.0: wakeup
50.
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] =
0x00010101 CSC PPS CCShub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
51.
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] =
0x00010101 CSC PPS CCShub 1-0:1.0: port 4, status 0101, change 0001, 12
Mb/s
52.
hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status
0x101
53.
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] =
0x00100103 PRSC PPS PES CCS
54.
usb 1-4: new full speed USB device using ohci_hcd and address 11
55.
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] =
0x00100103 PRSC PPS PES CCS
56.
usb 1-4: ep0 maxpacket = 8
57.
usb 1-4: default language 0x0409
58.
usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=0
59.
usb 1-4: Product: GBella Corporation DV Keyboard
60.
usb 1-4: Manufacturer: Bella Corporation
61.
usb 1-4: uevent
62.
usb 1-4: configuration #1 chosen from 1 choice
63.
usb 1-4: adding 1-4:1.0 (config #1, interface 0)
64.
usb 1-4:1.0: uevent
65.
hub 1-4:1.0: usb_probe_interface
66.
hub 1-4:1.0: usb_probe_interface - got id
67.
hub 1-4:1.0: USB hub found
68.
hub 1-4:1.0: 3 ports detected
69.
hub 1-4:1.0: compound device; port removable status: FRR
70.
hub 1-4:1.0: individual port power switching
71.
hub 1-4:1.0: individual port over-current protection
72.
hub 1-4:1.0: power on to power good time: 100ms
73.
hub 1-4:1.0: hub controller current requirement: 25mA
74.
hub 1-4:1.0: 100mA bus power budget for each child
75.
hub 1-4:1.0: local power source is good
76.
hub 1-4:1.0: enabling power on all ports
77.
drivers/usb/core/inode.c: creating file '011'
78.
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0010
79.
hub 1-4:1.0: state 7 ports 3 chg 0000 evt 0000
80.
hub 1-4:1.0: port 1, status 0101, change 0001, 12 Mb/s
81.
hub 1-4:1.0: debounce: port 1: total 100ms stable 100ms status
0x101
82.
usb 1-4.1: new full speed USB device using ohci_hcd and address 12
83.
usb 1-4.1: ep0 maxpacket = 8
84.
usb 1-4.1: skipped 1 descriptor after interface
85.
usb 1-4.1: skipped 1 descriptor after interface
86.
usb 1-4.1: default language 0x0409
87.
usb 1-4.1: new device strings: Mfr=1, Product=2, SerialNumber=0
88.
usb 1-4.1: Product: USB Keyboard
89.
usb 1-4.1: Manufacturer: ABBHOME
90.
usb 1-4.1: uevent
91.
usb 1-4.1: configuration #1 chosen from 1 choice
92.
usb 1-4.1: adding 1-4.1:1.0 (config #1, interface 0)
93.
usb 1-4.1:1.0: uevent
94.
usbhid 1-4.1:1.0: usb_probe_interface
95.
usbhid 1-4.1:1.0: usb_probe_interface - got id
96.
input: ABBHOME USB Keyboard as /class/input/input10
97.
input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on
usb-0000:00:02.0-4.1
98.
usb 1-4.1: adding 1-4.1:1.1 (config #1, interface 1)
99.
usb 1-4.1:1.1: uevent
100.
usbhid 1-4.1:1.1: usb_probe_interface
101.
usbhid 1-4.1:1.1: usb_probe_interface - got id
102.
input: ABBHOME USB Keyboard as /class/input/input11
103.
input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on
usb-0000:00:02.0-4.1
104.
drivers/usb/core/inode.c: creating file '012'
105.
hub 1-4:1.0: 425mA power budget left
106.
hub 1-4:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
107.
hub 1-4:1.0: debounce: port 2: total 100ms stable 100ms status
0x301
108.
usb 1-4.2: new low speed USB device using ohci_hcd and address 13
109.
usb 1-4.2: skipped 1 descriptor after interface
110.
usb 1-4.2: default language 0x0409
111.
usb 1-4.2: new device strings: Mfr=1, Product=2, SerialNumber=0
112.
usb 1-4.2: Product: NetScroll+ Traveler
113.
usb 1-4.2: Manufacturer: Genius
114.
usb 1-4.2: uevent
115.
usb 1-4.2: configuration #1 chosen from 1 choice
116.
usb 1-4.2: adding 1-4.2:1.0 (config #1, interface 0)
117.
usb 1-4.2:1.0: uevent
118.
usbhid 1-4.2:1.0: usb_probe_interface
119.
usbhid 1-4.2:1.0: usb_probe_interface - got id
120.
input: Genius NetScroll+ Traveler as /class/input/input12
121.
input: USB HID v1.10 Mouse [Genius NetScroll+ Traveler] on
usb-0000:00:02.0-4.2
122.
drivers/usb/core/inode.c: creating file '013'
123.
hub 1-4:1.0: 325mA power budget left
124.
hub 1-4:1.0: state 7 ports 3 chg 0000 evt 0004
--- End Message ---
--- Begin Message ---
Version: 2.6.24-1
report against old version and assumed fixed since.
checkout etch + half kernel
http://wiki.debian.org/EtchAndAHalf
thanks for report
--
maks
--- End Message ---
