(new) atl2-modules-2.6-itanium-etchnhalf_2.6.24-6~etchnhalf.1_ia64.deb optional admin Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6 on Itanium This package depends on the Driver for the Atheros L2 Fast Ethernet Adapter modules for latest Linux kernel 2.6 on Itanium machines. . atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter. The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus laptop systems, such as the Asus Eee PC. (new) atl2-modules-2.6-mckinley-etchnhalf_2.6.24-6~etchnhalf.1_ia64.deb optional admin Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6 on Itanium II This package depends on the Driver for the Atheros L2 Fast Ethernet Adapter modules for latest Linux kernel 2.6 on Itanium II machines. . atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter. The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus laptop systems, such as the Asus Eee PC. (new) atl2-modules-2.6.24-etchnhalf.1-itanium_2.6.24+2.0.3-6~etchnhalf.1_ia64.deb optional admin Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6.24 on Itanium This package provides the Driver for the Atheros L2 Fast Ethernet Adapter modules for the Linux kernel version 2.6.24 on Itanium machines. . atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter. The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus laptop systems, such as the Asus Eee PC. (new) atl2-modules-2.6.24-etchnhalf.1-mckinley_2.6.24+2.0.3-6~etchnhalf.1_ia64.deb optional admin Driver for the Atheros L2 Fast Ethernet Adapter modules for Linux 2.6.24 on Itanium II This package provides the Driver for the Atheros L2 Fast Ethernet Adapter modules for the Linux kernel version 2.6.24 on Itanium II machines. . atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter. The the Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus laptop systems, such as the Asus Eee PC. (new) linux-modules-extra-2.6-etchnhalf_2.6.24-6~etchnhalf.1.dsc optional devel (new) linux-modules-extra-2.6-etchnhalf_2.6.24-6~etchnhalf.1.tar.gz optional devel (new) loop-aes-modules-2.6-itanium-etchnhalf_2.6.24-6~etchnhalf.1_ia64.deb optional admin loop-AES encryption modules for Linux 2.6 on Itanium This package depends on the loop-AES encryption modules for latest Linux kernel 2.6 on Itanium machines. . The loop-AES encryption modules provide support for symmetric-key encryption of block devices. They are typically used to encrypt disk partitions and swap space. . Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded MD5 IV. Compatibility options are provided to access encrypted devices using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2. . You will need to install the package loop-aes-utils to use the loop-AES encryption modules. (new) loop-aes-modules-2.6-mckinley-etchnhalf_2.6.24-6~etchnhalf.1_ia64.deb optional admin loop-AES encryption modules for Linux 2.6 on Itanium II This package depends on the loop-AES encryption modules for latest Linux kernel 2.6 on Itanium II machines. . The loop-AES encryption modules provide support for symmetric-key encryption of block devices. They are typically used to encrypt disk partitions and swap space. . Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded MD5 IV. Compatibility options are provided to access encrypted devices using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2. . You will need to install the package loop-aes-utils to use the loop-AES encryption modules. (new) loop-aes-modules-2.6.24-etchnhalf.1-itanium_2.6.24+3.2c-6~etchnhalf.1_ia64.deb optional admin loop-AES encryption modules for Linux 2.6.24 on Itanium This package provides the loop-AES encryption modules for the Linux kernel version 2.6.24 on Itanium machines. . The loop-AES encryption modules provide support for symmetric-key encryption of block devices. They are typically used to encrypt disk partitions and swap space. . Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded MD5 IV. Compatibility options are provided to access encrypted devices using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2. . You will need to install the package loop-aes-utils to use the loop-AES encryption modules. (new) loop-aes-modules-2.6.24-etchnhalf.1-mckinley_2.6.24+3.2c-6~etchnhalf.1_ia64.deb optional admin loop-AES encryption modules for Linux 2.6.24 on Itanium II This package provides the loop-AES encryption modules for the Linux kernel version 2.6.24 on Itanium II machines. . The loop-AES encryption modules provide support for symmetric-key encryption of block devices. They are typically used to encrypt disk partitions and swap space. . Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded MD5 IV. Compatibility options are provided to access encrypted devices using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2. . You will need to install the package loop-aes-utils to use the loop-AES encryption modules. (new) squashfs-modules-2.6-itanium-etchnhalf_2.6.24-6~etchnhalf.1_ia64.deb optional admin Driver for compression filesystem modules for Linux 2.6 on Itanium This package depends on the Driver for compression filesystem modules for latest Linux kernel 2.6 on Itanium machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. (new) squashfs-modules-2.6-mckinley-etchnhalf_2.6.24-6~etchnhalf.1_ia64.deb optional admin Driver for compression filesystem modules for Linux 2.6 on Itanium II This package depends on the Driver for compression filesystem modules for latest Linux kernel 2.6 on Itanium II machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. (new) squashfs-modules-2.6.24-etchnhalf.1-itanium_2.6.24+3.3-6~etchnhalf.1_ia64.deb optional admin Driver for compression filesystem modules for Linux 2.6.24 on Itanium This package provides the Driver for compression filesystem modules for the Linux kernel version 2.6.24 on Itanium machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. (new) squashfs-modules-2.6.24-etchnhalf.1-mckinley_2.6.24+3.3-6~etchnhalf.1_ia64.deb optional admin Driver for compression filesystem modules for Linux 2.6.24 on Itanium II This package provides the Driver for compression filesystem modules for the Linux kernel version 2.6.24 on Itanium II machines. . Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. . Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. Changes: linux-modules-extra-2.6-etchnhalf (2.6.24-6~etchnhalf.1) stable; urgency=low . * Branch for etchnhalf
Override entries for your package: Announcing to [EMAIL PROTECTED] Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. You may have gotten the distribution wrong. You'll get warnings above if files already exist in other distributions. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
