--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-1
Severity: normal
I have recently upgraded to the linux-image-2.6.26-1-686 and have
discovered that the PC speaker driver is enabled (it is disabled with
previous kernels with the line "blacklist pcspkr" in
/etc/modprobe.d/blacklist).
I have checked that the module is not loaded (it is not present in the
output of lsmod).
In the dmesg output, you can see that the PC Speaker driver is loaded
during the boot process:
[ 7.922801] input: PC Speaker as /class/input/input12
If I try to modprobe pcspkr, I get:
[ 267.131367] Error: Driver 'pcspkr' is already registered, aborting...
Of course, if I try to remove the module pcspkr (using rmmod), I
get an error because the module is not loaded:
ERROR: Module pcspkr does not exist in /proc/modules
According to the /boot/config-2.6.26-1-686, the driver PC Speaker is
provided as a module.
There is also a new option in the 2.6.26 kernel, CONFIG_PCSPKR_PLATFORM,
which is set to yes. But I do not know if it is related to my problem.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-1) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Jul 30 20:02:15 UTC
2008
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686
root=UUID=d9e83be5-dc73-4adf-b602-99c896288e65 ro vga=791
** Not tainted
** Kernel log:
[ 3.941147] usb 1-2: USB disconnect, address 2
[ 4.272597] usb 5-2.3: new full speed USB device using ehci_hcd and address 4
[ 4.386684] usb 5-2.3: configuration #1 chosen from 1 choice
[ 4.392809] hub 5-2.3:1.0: USB hub found
[ 4.399693] hub 5-2.3:1.0: 3 ports detected
[ 4.513892] usb 5-2.3: New USB device found, idVendor=0b97, idProduct=7761
[ 4.517122] usb 5-2.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.734449] usb 5-8.1: new high speed USB device using ehci_hcd and address 5
[ 4.827191] usb 5-8.1: configuration #1 chosen from 1 choice
[ 4.836139] hub 5-8.1:1.0: USB hub found
[ 4.843730] hub 5-8.1:1.0: 4 ports detected
[ 5.110354] usb 5-8.1: New USB device found, idVendor=0424, idProduct=a700
[ 5.115345] usb 5-8.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 5.319411] usb 5-8.2: new low speed USB device using ehci_hcd and address 6
[ 5.420407] usb 5-8.2: configuration #1 chosen from 1 choice
[ 5.436348] usb 5-8.2: New USB device found, idVendor=046d, idProduct=c016
[ 5.440820] usb 5-8.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.440822] usb 5-8.2: Product: Optical USB Mouse
[ 5.440824] usb 5-8.2: Manufacturer: Logitech
[ 5.659061] usb 5-8.3: new full speed USB device using ehci_hcd and address 7
[ 5.779246] usb 5-8.3: configuration #1 chosen from 1 choice
[ 5.789426] hub 5-8.3:1.0: USB hub found
[ 5.793518] hub 5-8.3:1.0: 3 ports detected
[ 5.901786] usb 5-8.3: New USB device found, idVendor=413c, idProduct=1003
[ 5.908247] usb 5-8.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.916190] usb 5-8.3: Product: Dell USB Keyboard Hub
[ 5.921899] usb 5-8.3: Manufacturer: Dell
[ 6.145166] usb 5-2.3.2: new full speed USB device using ehci_hcd and
address 8
[ 6.249716] usb 5-2.3.2: configuration #1 chosen from 1 choice
[ 6.259705] usb 5-2.3.2: New USB device found, idVendor=0b97, idProduct=7762
[ 6.266228] usb 5-2.3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.272788] usb 5-2.3.2: Product: O2Micro CCID SC Reader
[ 6.277170] usb 5-2.3.2: Manufacturer: O2
[ 6.608965] usb 5-8.3.1: new full speed USB device using ehci_hcd and
address 9
[ 6.627900] intel_rng: FWH not detected
[ 6.635194] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 6.641137] ACPI: AC Adapter [AC] (on-line)
[ 6.661136] Linux agpgart interface v0.103
[ 6.677587] agpgart: Detected an Intel 945GM Chipset.
[ 6.685524] agpgart: Detected 7932K stolen memory.
[ 6.708560] agpgart: AGP aperture is 256M @ 0xc0000000
[ 6.719139] usb 5-8.3.1: configuration #1 chosen from 1 choice
[ 6.725317] input: Lid Switch as /class/input/input1
[ 6.727139] usb 5-8.3.1: New USB device found, idVendor=413c, idProduct=2010
[ 6.727139] usb 5-8.3.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 6.727139] usb 5-8.3.1: Product: Dell USB Keyboard
[ 6.727139] usb 5-8.3.1: Manufacturer: Dell
[ 6.809462] ACPI: Lid Switch [LID]
[ 6.817500] input: Power Button (CM) as /class/input/input2
[ 6.875539] ACPI: Power Button (CM) [PBTN]
[ 6.882024] input: Sleep Button (CM) as /class/input/input3
[ 6.895195] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) ->
IRQ 17
[ 6.939196] usbcore: registered new interface driver hiddev
[ 6.950114] ACPI: Sleep Button (CM) [SBTN]
[ 6.955577] input: Logitech Optical USB Mouse as /class/input/input4
[ 7.007577] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse]
on usb-0000:00:1d.7-8.2
[ 7.016609] input: Dell Dell USB Keyboard as /class/input/input5
[ 7.071645] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard]
on usb-0000:00:1d.7-8.3.1
[ 7.081019] input: Dell Dell USB Keyboard as /class/input/input6
[ 7.151580] ACPI: Battery Slot [BAT0] (battery present)
[ 7.158421] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.180915] input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on
usb-0000:00:1d.7-8.3.1
[ 7.188910] usbcore: registered new interface driver usbhid
[ 7.195661] usbhid: v2.6:USB HID core driver
[ 7.241190] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
[ 7.241190] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
[ 7.241190] ACPI: Error installing bay notify handler
[ 7.255419] input: Video Bus as /class/input/input7
[ 7.313111] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.320223] input: Video Bus as /class/input/input8
[ 7.377040] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 7.383763] input: Video Bus as /class/input/input9
[ 7.438545] b43-phy0: Broadcom 4311 WLAN found
[ 7.447617] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 7.513459] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 7.521328] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7.524946] phy0: Selected rate control algorithm 'pid'
[ 7.652517] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 7.717877] input: PS/2 Mouse as /class/input/input10
[ 7.797666] input: AlpsPS/2 ALPS GlidePoint as /class/input/input11
[ 7.809705] udev: renamed network interface wmaster0 to eth1
[ 7.922801] input: PC Speaker as /class/input/input12
[ 39.306181] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1
across:1951856k
[ 39.779321] EXT3 FS on sda2, internal journal
[ 39.933275] loop: module loaded
[ 39.977074] Non-volatile memory driver v1.2
[ 40.427303] kjournald starting. Commit interval 5 seconds
[ 40.433732] EXT3 FS on sda3, internal journal
[ 40.441415] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.426297] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 42.635617] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 42.820205] NET: Registered protocol family 10
[ 42.829768] lo: Disabled Privacy Extensions
[ 42.845809] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 47.839911] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.409067] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 49.409067] tg3: eth0: Flow control is off for TX and off for RX.
[ 49.428084] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 59.635826] eth0: no IPv6 routers present
[ 267.131367] Error: Driver 'pcspkr' is already registered, aborting...
** Loaded modules:
Module Size Used by
acpi_cpufreq 6796 1
cpufreq_conservative 5960 0
cpufreq_ondemand 6476 0
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1856 1
parport_pc 22532 0
parport 30988 1 parport_pc
ip6table_filter 2432 1
ip6_tables 11376 1 ip6table_filter
ipv6 235204 14
xt_tcpudp 2816 1
nf_conntrack_ipv4 12268 1
xt_state 2016 1
nf_conntrack 55508 2 nf_conntrack_ipv4,xt_state
iptable_filter 2624 1
ip_tables 10160 1 iptable_filter
x_tables 13284 4 ip6_tables,xt_tcpudp,xt_state,ip_tables
nvram 7116 0
loop 12748 0
snd_pcsp 8576 0
joydev 8480 0
arc4 1824 2
ecb 2624 2
crypto_blkcipher 15236 1 ecb
snd_hda_intel 323640 0
b43 110748 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62628 3 snd_pcsp,snd_hda_intel,snd_pcm_oss
rfkill 5652 1 b43
mac80211 139680 1 b43
video 16400 0
snd_seq_dummy 2660 0
snd_seq_oss 24960 0
output 2912 1 video
battery 6272 0
psmouse 32336 0
snd_seq_midi 5728 0
snd_rawmidi 18560 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 10
snd_pcsp,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
usbhid 35904 0
cfg80211 21576 1 mac80211
soundcore 6368 1 snd
i2c_i801 7920 0
hid 33184 1 usbhid
led_class 3908 1 b43
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
i2c_core 19828 1 i2c_i801
button 6064 0
intel_agp 22300 1
agpgart 28776 2 intel_agp
serio_raw 4740 0
ac 3264 0
dcdbas 6272 0
rng_core 3940 1 b43
evdev 8000 10
input_polldev 3752 1 b43
ff_memless 4392 1 usbhid
ext3 105256 2
jbd 39380 1 ext3
mbcache 7108 1 ext3
sg 26964 0
sr_mod 13316 0
cdrom 30176 1 sr_mod
sd_mod 22200 4
ata_generic 4676 0
ata_piix 14180 3
libata 140416 2 ata_generic,ata_piix
scsi_mod 129356 4 sg,sr_mod,sd_mod,libata
uhci_hcd 18672 0
ehci_hcd 28428 0
usbcore 118160 4 usbhid,uhci_hcd,ehci_hcd
ide_pci_generic 3908 0 [permanent]
ssb 33476 1 b43
pcmcia 29548 2 b43,ssb
ide_core 92628 1 ide_pci_generic
tg3 84516 0
pcmcia_core 31892 3 b43,ssb,pcmcia
firmware_class 6816 2 b43,pcmcia
dock 8272 1 libata
thermal 15228 0
processor 32548 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at eff8 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: dfd00000-dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 [8086:27d4] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752
Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0c:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan
mini-PCI [14e4:4311] (rev 01)
Subsystem: Dell Device [1028:0007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub-pc [grub] 1.96+20080724-5 GRand Unified Bootloader, version
ii linux-doc-2.6.26 2.6.26-1 Linux kernel specific documentatio
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
--- End Message ---
