Package: linux-image-2.6.24-etchnhalf.1-686 Version: 2.6.24-6~etchnhalf.4 Severity: important
I upgraded to etchnhalf and the machine started hanging on reboot. I also tested with 2.6.24-1-686 and 2.6.25-2-686 with the same results. Booting with "reboot=b" works around the problem. Ubuntu bug 114854 seems like the same thing: https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/114854 It says that they fixed it, so perhaps the same patch can be used for Debian ? After a quick Google it seems that this problem occurs mainly on Dell machines. If you need, please contact me for more info. HTH, Tzvetan -- Package-specific info: ** Version: Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.4) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Jul 21 11:17:43 UTC 2008 ** Command line: root=/dev/sda1 ro 8250.nr_uarts=5 vga=791 splash quiet ** Not tainted ** Kernel log: usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff980800 usb 1-2: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21 usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Mag-Tek USB Swipe Reader as /class/input/input0 input,hidraw0: USB HID v1.00 Keyboard [Mag-Tek USB Swipe Reader] on usb-0000:00:1d.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xff970100 irq 221 ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xff970180 irq 221 ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xff970200 irq 221 ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xff970280 irq 221 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133 ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: not 100% native mode: will probe irqs later ICH7: IDE port disabled ICH7: IDE port disabled Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected input: Power Button (FF) as /class/input/input2 parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 Linux agpgart interface v0.102 agpgart: Detected an Intel G33 Chipset. agpgart: Detected 7164K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [VBTN] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k EXT3 FS on sda1, internal journal loop: module loaded lp0: using parport0 (interrupt-driven). device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. mtrr: type mismatch for c07e0000,10000 old: write-back new: write-combining mtrr: type mismatch for c07c0000,20000 old: write-back new: write-combining mtrr: type mismatch for c0780000,40000 old: write-back new: write-combining mtrr: type mismatch for c0700000,80000 old: write-back new: write-combining mtrr: type mismatch for c0600000,100000 old: write-back new: write-combining mtrr: type mismatch for c0400000,200000 old: write-back new: write-combining mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining ** Loaded modules: Module Size Used by tcp_diag 1888 0 inet_diag 12328 2 tcp_diag ac 6212 0 battery 13700 0 parport_serial 7296 0 dm_snapshot 17060 0 dm_mirror 21792 0 dm_mod 56004 2 dm_snapshot,dm_mirror lp 11204 0 loop 16996 0 snd_hda_intel 274848 0 snd_pcm_oss 38368 0 snd_mixer_oss 15424 1 snd_pcm_oss snd_pcm 72036 2 snd_hda_intel,snd_pcm_oss snd_timer 21348 1 snd_pcm snd 48772 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer serio_raw 6788 0 soundcore 7680 1 snd intel_agp 23540 1 agpgart 31912 1 intel_agp i2c_i801 9456 0 parport_pc 26340 2 parport_serial parport 34472 2 lp,parport_pc button 8528 0 iTCO_wdt 11396 0 evdev 11200 0 snd_page_alloc 10184 2 snd_hda_intel,snd_pcm i2c_core 22656 1 i2c_i801 psmouse 36656 0 pcspkr 3264 0 rtc 13148 0 ext3 123272 1 jbd 43892 1 ext3 mbcache 8480 1 ext3 sd_mod 27296 3 piix 7556 0 [permanent] generic 4484 0 [permanent] ide_core 108740 2 piix,generic usbhid 28032 0 hid 34400 1 usbhid ahci 26372 2 ata_generic 7556 0 libata 144560 2 ahci,ata_generic scsi_mod 141516 2 sd_mod,libata ehci_hcd 32556 0 uhci_hcd 23568 0 usbcore 127724 4 usbhid,ehci_hcd,uhci_hcd tg3 89316 0 thermal 16092 0 processor 36840 1 thermal fan 4868 0 vga16fb 13164 0 vgastate 8352 1 vga16fb ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:29c0] (rev 0a) Subsystem: Dell Unknown device [1028:0220] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:29c1] (rev 0a) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: dfc00000-dfcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Unknown device [8086:29c2] (rev 0a) (prog-if 00 [VGA]) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ecd8 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dff00000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Unknown device [8086:29c3] (rev 0a) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Unknown device [1028:0220] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dfdfc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: dfb00000-dfbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 4: I/O ports at ff80 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at ff60 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Unknown device [1028:0220] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] 00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 221 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fec0 [size=16] Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Unknown device [1028:0220] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ece0 [size=32] 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787 Gigabit Ethernet PCI Express [14e4:169b] (rev 02) Subsystem: Dell Unknown device [1028:0220] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 220 Region 0: Memory at dfbf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 03:01.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) (prog-if 02 [16550]) Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at dc90 [size=8] Region 1: I/O ports at dc98 [size=8] Region 2: I/O ports at dca0 [size=8] Region 3: I/O ports at dca8 [size=8] Region 4: I/O ports at dcb0 [size=8] Region 5: I/O ports at dce0 [size=16] 03:02.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) (prog-if 02 [16550]) Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at dcb8 [size=8] Region 1: I/O ports at dcc0 [size=8] Region 2: I/O ports at dcc8 [size=8] Region 3: I/O ports at dcd0 [size=8] Region 4: I/O ports at dcd8 [size=8] Region 5: I/O ports at dcf0 [size=16] -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-etchnhalf.1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on: ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends: ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.24-etchnhalf.1-686/preinst/bootloader-initrd-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/elilo-initrd-2.6.24-etchnhalf.1-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-etchnhalf.1-686/preinst/abort-overwrite-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-2.6.24-etchnhalf.1-686: false linux-image-2.6.24-etchnhalf.1-686/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/overwriting-modules-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/initrd-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/old-system-map-link-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-686: false linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-initrd-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/postinst/kimage-is-a-directory: linux-image-2.6.24-etchnhalf.1-686/preinst/abort-install-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/prerm/removing-running-kernel-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-has-ramdisk: linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-error-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-test-error-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/old-initrd-link-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/postinst/create-kimage-link-2.6.24-etchnhalf.1-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
