Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-4 Severity: important
My MP3 Player (iRiver S10 - doesn't matter here, because acts as general USB Storage) was mounted with the last but one revision of the kernel in testing mounted with read and write acsess, the next version broke usb-storage completely, this bug is now marked as fixed: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=494800 So I updated eagerly to the new version of the kernel today with aptitude. The Device now seems to get mounted correctly: Sep 4 22:16:47 KnusperStation kernel: [ 131.576026] usb 2-5: new high speed USB device using ehci_hcd and address 5 Sep 4 22:16:47 KnusperStation kernel: [ 131.708797] usb 2-5: configuration #1 chosen from 1 choice Sep 4 22:16:47 KnusperStation kernel: [ 131.709059] usb 2-5: New USB device found, idVendor=4102, idProduct=1023 Sep 4 22:16:47 KnusperStation kernel: [ 131.709063] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 4 22:16:47 KnusperStation kernel: [ 131.709065] usb 2-5: Product: iriver S10 Sep 4 22:16:47 KnusperStation kernel: [ 131.709067] usb 2-5: Manufacturer: iriver Limited Sep 4 22:16:47 KnusperStation kernel: [ 131.885245] Initializing USB Mass Storage driver... Sep 4 22:16:47 KnusperStation kernel: [ 131.889247] scsi4 : SCSI emulation for USB Mass Storage devices Sep 4 22:16:47 KnusperStation kernel: [ 131.889713] usbcore: registered new interface driver usb-storage Sep 4 22:16:47 KnusperStation kernel: [ 131.889718] USB Mass Storage support registered. Sep 4 22:16:52 KnusperStation kernel: [ 136.892986] scsi 4:0:0:0: Direct-Access iriver S10 0.83 PQ: 0 ANSI: 2 Sep 4 22:16:52 KnusperStation kernel: [ 136.940131] sd 4:0:0:0: [sdc] 3991552 512-byte hardware sectors (2044 MB) Sep 4 22:16:52 KnusperStation kernel: [ 136.941378] sd 4:0:0:0: [sdc] Write Protect is off Sep 4 22:16:52 KnusperStation kernel: [ 136.956034] sd 4:0:0:0: [sdc] 3991552 512-byte hardware sectors (2044 MB) Sep 4 22:16:52 KnusperStation kernel: [ 136.957375] sd 4:0:0:0: [sdc] Write Protect is off Sep 4 22:16:52 KnusperStation kernel: [ 136.957385] sdc: Sep 4 22:16:52 KnusperStation kernel: [ 136.976995] sd 4:0:0:0: [sdc] Attached SCSI removable disk However, I cannot write on this device, neither as normal user nor as root. I always get the message: touch test touch: kann „test“ nicht berühren: Das Dateisystem ist nur lesbar (sorry, German l8n) which means "File System Read only) - I get this as root and as a normal user. Since everything worked well 2 revisions ago, I assume this is a bug. -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008 ** Command line: root=/dev/sda2 ro vga=0x317 quiet ** Tainted: P (1) ** Kernel log: [ 5.619661] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 5.619676] sd 0:0:0:0: [sda] Write Protect is off [ 5.619678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.619699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.619745] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 5.619757] sd 0:0:0:0: [sda] Write Protect is off [ 5.619759] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.619778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.619781] sda: sda1 sda2 sda3 [ 5.638088] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.638156] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 5.638170] sd 2:0:0:0: [sdb] Write Protect is off [ 5.638172] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.638192] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.638238] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 5.638249] sd 2:0:0:0: [sdb] Write Protect is off [ 5.638251] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.638270] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.638273] sdb: sdb1 [ 5.649093] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.909588] PM: Starting manual resume from disk [ 5.944456] kjournald starting. Commit interval 5 seconds [ 5.944456] EXT3-fs: mounted filesystem with ordered data mode. [ 7.532731] udevd version 125 started [ 8.610238] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 8.610257] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 8.681977] input: Power Button (FF) as /class/input/input2 [ 8.712137] ACPI: Power Button (FF) [PWRF] [ 8.712225] input: Power Button (CM) as /class/input/input3 [ 8.736074] ACPI: Power Button (CM) [PWRB] [ 9.318128] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C [ 9.318148] usbcore: registered new interface driver usblp [ 9.788190] input: PC Speaker as /class/input/input4 [ 9.972235] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 9.972240] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 9.972259] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 9.983762] NET: Registered protocol family 23 [ 10.001789] Error: Driver 'pcspkr' is already registered, aborting... [ 10.006927] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 10.520002] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input5 [ 10.598724] pnp: the driver 'parport_pc' has been registered [ 10.598743] parport_pc 00:07: reported by Plug and Play ACPI [ 10.598797] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 10.692059] parport_pc 00:07: driver attached [ 11.613364] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k [ 11.942308] EXT3 FS on sda2, internal journal [ 12.675224] loop: module loaded [ 14.244194] kjournald starting. Commit interval 5 seconds [ 14.244194] EXT3 FS on sda3, internal journal [ 14.244194] EXT3-fs: mounted filesystem with ordered data mode. [ 14.266479] kjournald starting. Commit interval 5 seconds [ 14.268465] EXT3 FS on sdb1, internal journal [ 14.268468] EXT3-fs: mounted filesystem with ordered data mode. [ 17.175471] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 17.175510] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc [ 17.175513] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe [ 17.175515] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10 [ 17.175517] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 20.428646] lp0: using parport0 (interrupt-driven). [ 20.450492] ppdev: user-space parallel port driver [ 21.142397] NET: Registered protocol family 10 [ 21.142995] lo: Disabled Privacy Extensions [ 21.296113] Marking TSC unstable due to cpufreq changes [ 21.736030] Clocksource tsc unstable (delta = -242618300 ns) [ 24.037125] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 28.496287] nvidia: module license 'NVIDIA' taints kernel. [ 28.756278] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 28.756289] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 28.756297] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 28.756511] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.12 Thu Jul 17 18:10:24 PDT 2008 [ 43.968031] eth0: no IPv6 routers present [ 131.576026] usb 2-5: new high speed USB device using ehci_hcd and address 5 [ 131.708797] usb 2-5: configuration #1 chosen from 1 choice [ 131.709059] usb 2-5: New USB device found, idVendor=4102, idProduct=1023 [ 131.709063] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 131.709065] usb 2-5: Product: iriver S10 [ 131.709067] usb 2-5: Manufacturer: iriver Limited [ 131.885245] Initializing USB Mass Storage driver... [ 131.889247] scsi4 : SCSI emulation for USB Mass Storage devices [ 131.889713] usbcore: registered new interface driver usb-storage [ 131.889718] USB Mass Storage support registered. [ 131.892459] usb-storage: device found at 5 [ 131.892463] usb-storage: waiting for device to settle before scanning [ 136.892148] usb-storage: device scan complete [ 136.892986] scsi 4:0:0:0: Direct-Access iriver S10 0.83 PQ: 0 ANSI: 2 [ 136.940131] sd 4:0:0:0: [sdc] 3991552 512-byte hardware sectors (2044 MB) [ 136.941378] sd 4:0:0:0: [sdc] Write Protect is off [ 136.941382] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 136.941384] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 136.956034] sd 4:0:0:0: [sdc] 3991552 512-byte hardware sectors (2044 MB) [ 136.957375] sd 4:0:0:0: [sdc] Write Protect is off [ 136.957380] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 136.957382] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 136.957385] sdc: [ 136.976995] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 141.552540] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 161.424839] FAT: Filesystem panic (dev sdc) [ 161.424845] fat_free_clusters: deleting FAT entry beyond EOF [ 161.424848] File system has been set read-only [ 1380.121283] play[3994]: segfault at 200829502 ip 7f7dedc20f47 sp 7ffffc310028 error 4 in libsox_fmt_wav.so.0.0.0[7f7dedc1f000+8000] ** Loaded modules: Module Size Used by tcp_diag 5888 0 inet_diag 13968 1 tcp_diag nls_utf8 6272 1 nls_cp437 11136 1 vfat 14976 1 fat 51128 1 vfat nls_base 12932 4 nls_utf8,nls_cp437,vfat,fat usb_storage 94400 1 nvidia 8104272 24 ipv6 288200 16 ppdev 11656 0 lp 14724 0 video 24084 0 output 7808 1 video ac 9352 0 battery 16904 0 powernow_k8 17156 0 cpufreq_stats 9120 0 cpufreq_conservative 11784 0 cpufreq_ondemand 11792 1 freq_table 9344 3 powernow_k8,cpufreq_stats,cpufreq_ondemand cpufreq_userspace 8452 0 cpufreq_powersave 6400 0 loop 19468 0 irtty_sir 9728 0 parport_pc 31016 1 parport 41776 3 ppdev,lp,parport_pc sir_dev 16904 1 irtty_sir irda 117732 1 sir_dev snd_hda_intel 434776 1 crc_ccitt 6528 1 irda snd_pcm_oss 41760 0 snd_mixer_oss 18816 2 snd_pcm_oss psmouse 42268 0 serio_raw 9860 0 pcspkr 7040 0 snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss snd_timer 25744 1 snd_pcm k8temp 9216 0 snd 63688 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 12064 2 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm usblp 16896 0 button 11680 0 i2c_nforce2 10752 0 i2c_core 27936 2 nvidia,i2c_nforce2 evdev 14208 3 ext3 124688 3 jbd 51240 1 ext3 mbcache 12804 1 ext3 sd_mod 29376 7 ide_cd_mod 36360 0 cdrom 37928 1 ide_cd_mod ata_generic 10116 0 amd74xx 13448 0 [permanent] sata_nv 27528 4 libata 165472 2 ata_generic,sata_nv scsi_mod 160760 3 usb_storage,sd_mod,libata dock 14112 1 libata forcedeth 54032 0 ide_pci_generic 9220 0 [permanent] ide_core 128284 3 ide_cd_mod,amd74xx,ide_pci_generic ehci_hcd 36108 0 ohci_hcd 25092 0 thermal 22688 0 processor 42304 2 powernow_k8,thermal fan 9352 0 thermal_sys 17728 4 video,thermal,processor,fan ** PCI devices: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0363] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at 2d00 [size=64] Region 5: I/O ports at 2e00 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:036a] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fbffac00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: AMD_IDE Kernel modules: ide-pci-generic, amd74xx, ata_generic 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at d800 [size=8] Region 1: I/O ports at d480 [size=4] Region 2: I/O ports at d400 [size=8] Region 3: I/O ports at d080 [size=4] Region 4: I/O ports at d000 [size=16] Region 5: Memory at fbff9000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: ide-pci-generic, sata_nv, ata_generic 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c880 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at c480 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: Memory at fbff8000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: ide-pci-generic, sata_nv, ata_generic 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fbff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7260] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 1274 Region 0: Memory at fbff3000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c080 [size=8] Region 2: Memory at fbffa800 (32-bit, non-prefetchable) [size=256] Region 3: Memory at fbffa400 (32-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: forcedeth Kernel modules: forcedeth 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fc000000-febfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 06:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7300 GT] [10de:0393] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:820e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at ec00 [size=128] [virtual] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
