Your message dated Sat, 29 Nov 2008 01:21:09 +0100
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#341961: Module sym53c8xx: phase change messages on
Iomega ZIP drive
has caused the Debian Bug report #341961,
regarding linux-image-2.6.12-1-386: Module sym53c8xx: phase change messages on
Iomega ZIP drive
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
341961: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=341961
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Subject: linux-image-2.6.12-1-386: Module sym53c8xx: "phase change" messages on
Iomega ZIP drive
Package: linux-image-2.6.12-1-386
Version: 2.6.12-10
Severity: normal
As soon as during the boot procedure my Iomega SCSI ZIP drive is recognized
I get the following message onto the console:
sd 0:0:5:0 phase change 6-7 [EMAIL PROTECTED] resid=7.
(the number [EMAIL PROTECTED] is different after each booting of the machine)
This message is written about 5-10 times per second onto the console making
working with it almost impossible. This was especially a problem during
installation of the system.
Inserting a disk into the ZIP drive improves the situation slightly:
The amount of messages drops to about 1 per second - still too much.
Despite of the messages, access to such a disk works correctly.
Booting the machine with the ZIP drive powered off does not give
the message.
I located the above message in the linux kernel files:
- /usr/src/linux-2.6-2.6.12/drivers/scsi/ncr53c8xx.c
- /usr/src/linux-2.6-2.6.12/drivers/scsi/sym53c8xx_2/sym_hipd.c
This bug seems to be closely related to #303088
Here is the relevant part of /var/log/messages:
Dec 4 08:32:17 df8xq-l2 kernel: PCI: Found IRQ 9 for device 0000:00:13.0
Dec 4 08:32:17 df8xq-l2 kernel: PCI: Sharing IRQ 9 with 0000:00:11.2
Dec 4 08:32:17 df8xq-l2 kernel: sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 9
Dec 4 08:32:17 df8xq-l2 kernel: sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity
checking
Dec 4 08:32:17 df8xq-l2 kernel: sym0: open drain IRQ line driver, using
on-chip SRAM
Dec 4 08:32:17 df8xq-l2 kernel: sym0: using LOAD/STORE-based firmware.
Dec 4 08:32:17 df8xq-l2 kernel: sym0: SCSI BUS has been reset.
Dec 4 08:32:17 df8xq-l2 kernel: scsi0 : sym-2.2.0
Dec 4 08:32:17 df8xq-l2 kernel: Floppy drive(s): fd0 is 1.44M
Dec 4 08:32:17 df8xq-l2 kernel: bt878: AUDIO driver version 0.0.0 loaded
Dec 4 08:32:17 df8xq-l2 kernel: FDC 0 is a post-1991 82077
Dec 4 08:32:17 df8xq-l2 kernel: USB Universal Host Controller Interface driver
v2.2
Dec 4 08:32:17 df8xq-l2 kernel: Vendor: TEAC Model: CD-R55S
Rev: 1.0R
Dec 4 08:32:17 df8xq-l2 kernel: Type: CD-ROM
ANSI SCSI revision: 02
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:1: Beginning Domain Validation
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:1: asynchronous.
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:1: Domain Validation skipping write
tests
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100
ns, offset 15)
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:1: Ending Domain Validation
Dec 4 08:32:17 df8xq-l2 kernel: Vendor: IOMEGA Model: ZIP 100
Rev: E.08
Dec 4 08:32:17 df8xq-l2 kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:5: Beginning Domain Validation
Dec 4 08:32:17 df8xq-l2 kernel: 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 last message repeated 3 times
Dec 4 08:32:17 df8xq-l2 kernel: target0:0:5: Ending Domain Validation
Dec 4 08:32:17 df8xq-l2 kernel: uhci_hcd 0000:00:07.2: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller
Dec 4 08:32:17 df8xq-l2 kernel: uhci_hcd 0000:00:07.2: new USB bus registered,
assigned bus number 4
Dec 4 08:32:17 df8xq-l2 kernel: uhci_hcd 0000:00:07.2: irq 10, io base
0x0000e400
Dec 4 08:32:17 df8xq-l2 kernel: hub 4-0:1.0: USB hub found
Dec 4 08:32:17 df8xq-l2 kernel: hub 4-0:1.0: 2 ports detected
Dec 4 08:32:17 df8xq-l2 kernel: sr0: scsi-1 drive
Dec 4 08:32:17 df8xq-l2 kernel: Attached scsi generic sg0 at scsi0, channel 0,
id 1, lun 0, type 5
Dec 4 08:32:17 df8xq-l2 kernel: Attached scsi generic sg1 at scsi0, channel 0,
id 5, lun 0, type 0
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 5, lun 0
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: Device not ready. Make sure there is a disc in
the drive.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
Dec 4 08:32:17 df8xq-l2 kernel: sd 0:0:5:0: phase change 6-7 [EMAIL PROTECTED]
resid=7.
-- System Information:
Debian Release: testing/unstable
Architecture: i386 (i586)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-1-386
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.12-1-386 depends on:
ii coreutils [fileutils] 5.2.1-2.1 The GNU core utilities
ii initrd-tools 0.1.84 tools to create initrd image for p
ii module-init-tools 3.2-pre9-4 tools for managing Linux kernel mo
linux-image-2.6.12-1-386 recommends no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Version: 2.6.17-9
On Thu, Dec 14, 2006 at 12:05:02PM +0100, Hans Streibel wrote:
> On Fri, Oct 27, 2006 at 06:56:21PM +0200, David Schmitt wrote:
> > In preparation of the upcoming etch release, would you please
> > test if either 2.6.17-9 from testing or 2.6.18-3 from unstable
> > fixes your problem with your ZIP drive?
>
> I tested it with linux-image-2.6.17-2-486 from testing and
> the error is gone. Thus I think we can close this bug.
Marking that version as fixed version.
Cheers,
Moritz
--- End Message ---
