Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-10 Severity: minor when I boot my Samsumg Q45 (laptop), I get the following messages at the _bottom_ of the screen. They remain there until the normal boot messages get to the bottom of the screen and overwrite them.
Kernel alive kernel direct mapping tables up to 100000000 @ 8000-d000 -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-10) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 18:25:23 UTC 2008 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=/dev/mapper/durandal-root ro quiet ** Not tainted ** Kernel log: [ 7.225542] ACPI: Lid Switch [LID0] [ 7.225615] input: Power Button (CM) as /class/input/input4 [ 7.265457] ACPI: Power Button (CM) [PWRB] [ 7.265539] input: Sleep Button (CM) as /class/input/input5 [ 7.329460] ACPI: Sleep Button (CM) [SLPB] [ 7.349921] ACPI: AC Adapter [ADP1] (off-line) [ 7.417396] ACPI: Battery Slot [BAT1] (battery present) [ 7.797302] ACPI: WMI: Mapper loaded [ 7.959789] Linux video capture interface: v2.00 [ 8.172103] usbcore: registered new interface driver hiddev [ 8.187117] input: Logitech USB Optical Mouse as /class/input/input6 [ 8.244935] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1 [ 8.257111] input: HID 046a:0023 as /class/input/input7 [ 8.284553] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) [ 8.288211] input: Vega USB 2.0 Camera. as /class/input/input8 [ 8.299942] input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-2 [ 8.322474] input: HID 046a:0023 as /class/input/input9 [ 8.391995] input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-2 [ 8.392044] usbcore: registered new interface driver usbhid [ 8.392048] usbhid: v2.6:USB HID core driver [ 8.392075] usbcore: registered new interface driver uvcvideo [ 8.392079] USB Video Class driver (v0.1.0) [ 8.395492] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 8.396044] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 8.396044] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.798371] input: PC Speaker as /class/input/input10 [ 8.812030] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 8.812030] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 8.812030] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.812030] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 8.812030] iwl3945: Detected Intel Wireless WiFi Link 3945BG [ 8.875052] iwl3945: Tunable channels: 11 802.11bg, 0 802.11a channels [ 8.875052] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 9.098421] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 9.109124] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 9.109124] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 9.141132] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... [ 9.212319] Yenta: CardBus bridge found at 0000:04:09.0 [144d:c510] [ 9.212319] PCI: Bus 5, cardbus bridge: 0000:04:09.0 [ 9.212319] IO window: 0x00003000-0x000030ff [ 9.212319] IO window: 0x00003400-0x000034ff [ 9.212319] PREFETCH window: 0x88400000-0x887fffff [ 9.212319] MEM window: 0x8c000000-0x8fffffff [ 9.339606] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 [ 9.339611] Socket status: 30000006 [ 9.339614] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 [ 9.339621] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 9.339624] pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff [ 9.349203] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19 [ 9.501075] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000 [ 9.539053] input: SynPS/2 Synaptics TouchPad as /class/input/input11 [ 11.581232] EXT3 FS on dm-0, internal journal [ 12.187217] loop: module loaded [ 149.572310] kjournald starting. Commit interval 5 seconds [ 149.575144] EXT3 FS on dm-3, internal journal [ 149.575144] EXT3-fs: mounted filesystem with ordered data mode. [ 154.474916] NET: Registered protocol family 10 [ 154.475469] lo: Disabled Privacy Extensions [ 155.172229] pnp: the driver 'parport_pc' has been registered [ 155.172229] lp: driver loaded but no devices found [ 155.218064] ppdev: user-space parallel port driver [ 163.563167] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 165.874024] Bluetooth: Core ver 2.11 [ 165.879351] NET: Registered protocol family 31 [ 165.879351] Bluetooth: HCI device and connection manager initialized [ 165.879351] Bluetooth: HCI socket layer initialized [ 165.934023] Bluetooth: L2CAP ver 2.9 [ 165.934023] Bluetooth: L2CAP socket layer initialized [ 166.031512] Bluetooth: RFCOMM socket layer initialized [ 166.031512] Bluetooth: RFCOMM TTY layer initialized [ 166.031512] Bluetooth: RFCOMM ver 1.8 [ 166.295951] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 166.301934] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106) [ 166.301934] firmware: requesting iwlwifi-3945-1.ucode [ 166.534199] Registered led device: iwl-phy0:radio [ 166.534239] Registered led device: iwl-phy0:assoc [ 166.534239] Registered led device: iwl-phy0:RX [ 166.534239] Registered led device: iwl-phy0:TX [ 166.563882] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 166.645920] sky2 eth0: enabling interface [ 166.649382] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 168.429220] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 168.429700] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 172.618245] [drm] Initialized drm 1.1.0 20060810 [ 172.644047] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 172.644047] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 172.644047] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 181.548592] eth0: no IPv6 routers present [ 200.683361] CPU0 attaching NULL sched-domain. [ 200.683374] CPU1 attaching NULL sched-domain. [ 200.698567] CPU0 attaching sched-domain: [ 200.698576] domain 0: span 0-1 [ 200.698580] groups: 0 1 [ 200.698586] domain 1: span 0-1 [ 200.698589] groups: 0-1 [ 200.698595] CPU1 attaching sched-domain: [ 200.698599] domain 0: span 0-1 [ 200.698602] groups: 1 0 [ 200.698607] domain 1: span 0-1 [ 200.698610] groups: 0-1 ** Loaded modules: Module Size Used by i915 35072 2 drm 91488 3 i915 binfmt_misc 13580 1 rfcomm 38176 2 l2cap 23936 9 rfcomm bluetooth 57124 4 rfcomm,l2cap ppdev 11656 0 parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp ipv6 288328 30 acpi_cpufreq 11792 1 cpufreq_powersave 6400 0 cpufreq_conservative 11784 0 cpufreq_ondemand 11792 1 cpufreq_stats 9120 0 freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats cpufreq_userspace 8452 0 sha256_generic 13696 0 aes_x86_64 12416 2 aes_generic 32552 1 aes_x86_64 cbc 7936 1 dm_crypt 17032 1 loop 19468 0 pcmcia 38680 0 arc4 6272 2 ecb 7296 2 crypto_blkcipher 21636 4 cbc,dm_crypt,ecb joydev 14848 0 snd_hda_intel 434776 4 serio_raw 9860 0 i2c_i801 13596 0 yenta_socket 27916 1 rsrc_nonstatic 14080 1 yenta_socket pcmcia_core 41508 3 pcmcia,yenta_socket,rsrc_nonstatic iwl3945 92916 0 pcspkr 7040 0 psmouse 42268 0 snd_pcm 81672 2 snd_hda_intel snd_seq 54304 0 snd_timer 25744 3 snd_pcm,snd_seq i2c_core 27936 1 i2c_i801 iTCO_wdt 15696 0 firmware_class 12544 2 pcmcia,iwl3945 uvcvideo 55560 0 snd_seq_device 11668 1 snd_seq usbhid 45792 0 mac80211 162864 1 iwl3945 hid 41792 1 usbhid compat_ioctl32 12288 1 uvcvideo videodev 35840 2 uvcvideo,compat_ioctl32 ff_memless 9224 1 usbhid led_class 8968 1 iwl3945 snd 63688 11 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device v4l1_compat 17284 2 uvcvideo,videodev wmi 11712 0 cfg80211 30224 2 iwl3945,mac80211 soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm battery 16904 0 ac 9352 0 button 11680 0 intel_agp 31728 1 evdev 14208 10 ext3 124944 2 jbd 51240 1 ext3 mbcache 12804 1 ext3 dm_mirror 20608 0 dm_log 13956 1 dm_mirror dm_snapshot 19400 0 dm_mod 58864 12 dm_crypt,dm_mirror,dm_log,dm_snapshot sg 36448 0 sr_mod 19652 0 cdrom 37928 1 sr_mod sd_mod 29376 2 ata_piix 22660 1 ata_generic 10116 0 libata 165472 2 ata_piix,ata_generic scsi_mod 160760 4 sg,sr_mod,sd_mod,libata dock 14112 1 libata ricoh_mmc 8448 0 ohci1394 32564 0 sdhci 19460 0 ieee1394 93816 1 ohci1394 mmc_core 52448 1 sdhci ide_pci_generic 9220 0 [permanent] ide_core 128284 1 ide_pci_generic sky2 48004 0 ehci_hcd 36108 0 uhci_hcd 25760 0 thermal 22688 0 processor 42304 4 acpi_cpufreq,thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f0704000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f0300000-f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0200000-f02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0704400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=08, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0400000-f04fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) (prog-if 80 [Master]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 18e0 [size=16] Region 5: I/O ports at 18d0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ide-pci-generic, ata_generic, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c00 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation PRO/Wireless 3945BG Network Connection [8086:1034] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1276 Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 Kernel modules: iwl3945 03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 15) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1277 Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 2000 [size=256] Capabilities: <access denied> Kernel driver in use: sky2 Kernel modules: sky2 04:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 20 Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=4K] Bus: primary=04, secondary=05, subordinate=08, sec-latency=176 Memory window 0: 88400000-887ff000 (prefetchable) Memory window 1: 8c000000-8ffff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 04:09.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 09) (prog-if 10 [OHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at f0401000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 04:09.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin C routed to IRQ 22 Region 0: Memory at f0401800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 04:09.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 255 Region 0: Memory at f0401c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ricoh-mmc Kernel modules: ricoh_mmc 04:09.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c510] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 255 Region 0: Memory at f0402000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 04:09.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff) !!! Unknown header type 7f -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (530, 'testing'), (520, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub-pc [grub] 1.96+20080724-12 GRand Unified Bootloader, version ii linux-doc-2.6.26 2.6.26-10 Linux kernel specific documentatio -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]