On Jan 9, 2009, at 1:20 PM, Frans Pop wrote:
reassign 511334 linux-2.6 2.6.26-12
thanks
On Friday 09 January 2009, Adam Thornton wrote:
S390 boot fails (sometimes just after detecting memory, sometimes
after
detecting devices) on z/VM 5.2 and a Flex-ES machine.
Since there are reports of d-i working on z9 boxes, I suspect the
issue
is that the kernel is built to exploit later System z functionality.
At least for d-i the basic 31-bit-no-frills architecture should be
selected as the s390 kernel (and basic 64-bit for s390x, e.g. z900),
with options for kernels that exploit later additions to the
architecture for installation (ideally based on detected machine
type).
This sounds like a kernel issue rather than an installer issue.
Therefore reassigning to the kernel team.
OK.
I can confirm that 2.6.26-1 as installed via aptitude dist-upgrade
from lenny fails in the same way. 2.6.24-etchnhalf was OK.
===begin console log===
Ready; T=0.01/0.01 13:56:33
cp spool cons to adam
Ready; T=0.01/0.01 13:56:40
cp spool cons start
Ready; T=0.01/0.01 13:56:43
ipl 150 clear
zIPL v1.6.2 interactive boot menu
0. default (debian)
1. debian
2. old
Note: VM users please use '#cp vi vmsg <input>'
Please choose (default will boot in 10 seconds):
Booting default (debian)...
Ö 0.000000Ü Initializing cgroup subsys cpuset
Ö 0.000000Ü Initializing cgroup subsys cpu
Ö 0.000000Ü Linux version 2.6.26-1-s390 (Debian 2.6.26-12) (wa...@debian.org
)
(gcc version 4.1.3 20080704 (prerelease) (Debian 4.
1.2-24)) #1 SMP Mon Dec 15 17:10:09 UTC 2008
Ö 0.000000Ü We are running under VM (31 bit mode)
Ö 0.000000Ü This machine has an IEEE fpu
Ö 0.000000Ü Zone PFN ranges:
Ö 0.000000Ü Normal 0 -> 32768
Ö 0.000000Ü Movable zone start PFN for each node
Ö 0.000000Ü early_node_mapÖ1Ü active PFN ranges
Ö 0.000000Ü 0: 0 -> 32767
Ö 0.000000Ü Built 1 zonelists in Zone order, mobility grouping on.
Total pag
es: 32511
Ö 0.000000Ü Kernel command line: root=/dev/disk/by-path/
ccw-0.0.0150-part1 BO
OT_IMAGE=0
Ö 0.000000Ü PID hash table entries: 512 (order: 9, 2048 bytes)
Ö17179568.187160Ü console ÖttyS0Ü enabled
Ö17179568.189352Ü Dentry cache hash table entries: 16384 (order: 4,
65536 bytes)
Ö17179568.190397Ü Inode-cache hash table entries: 8192 (order: 3,
32768 bytes)
Ö17179568.202860Ü Memory: 121428k/131072k available (2272k kernel
code, 0k reser
ved, 840k data, 148k init)
Ö17179569.203017Ü Write protected kernel read-only data: 0x12000 -
0x2edfff
Ö17179569.206392Ü Security Framework initialized
Ö17179569.206540Ü SELinux: Disabled at boot.
Ö17179569.206681Ü Capability LSM initialized
Ö17179568.207546Ü Mount-cache hash table entries: 512
Ö17179569.213083Ü Initializing cgroup subsys ns
Ö17179569.213277Ü Initializing cgroup subsys cpuacct
Ö17179569.213682Ü Initializing cgroup subsys devices
[*** HANG occurs here; the CP IPL 150 clear is my interrupt. Then I
reboot with the etchnhalf kernel and everything is fine ***]
CP IPL 150 CLEAR
zIPL v1.6.2 interactive boot menu
0. default (debian)
1. debian
2. old
Note: VM users please use '#cp vi vmsg <input>'
Please choose (default will boot in 10 seconds):
CP VI VMSG 2
Booting old...
Initializing cgroup subsys cpuset
Linux version 2.6.24-etchnhalf.1-s390 (Debian 2.6.24-6~etchnhalf.7)
(da...@debia
n.org) (gcc version 4.1.2 20061115 (prerelease) (Deb
ian 4.1.1-21)) #1 SMP Tue Dec 2 16:59:08 UTC 2008
We are running under VM (31 bit mode)
This machine has an IEEE fpu
Detected 1 CPU's
Boot cpu address 0
Zone PFN ranges:
Normal 0 -> 32768
Movable zone start PFN for each node
early_node_mapÖ1Ü active PFN ranges
0: 0 -> 32767
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
32512
Kernel command line: root=/dev/disk/by-path/ccw-0.0.0150-part1
BOOT_IMAGE=2
PID hash table entries: 512 (order: 9, 2048 bytes)
console ÖttyS0Ü enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 122964k/131072k available (2147k kernel code, 0k reserved,
775k data, 14
0k init)
Write protected kernel read-only data: 0x12000 - 0x2b8fff
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
cpu 0 phys_idx=0 vers=FF ident=030234 machine=1247 unused=0000
Brought up 1 CPUs
net_namespace: 64 bytes
NET: Registered protocol family 16
debug: Initialization complete
Time: tod clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3226k freed
audit: initializing netlink socket (disabled)
audit(1231527501.126:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 24576K size 1024 blocksize
cio: Channel measurement facility using basic format (autodetected)
qdio: loading QDIO base support version 2
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 140k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
dasd(eckd): 0.0.0150: 3390/0A(CU:3990/04) Cyl:1500 Head:15 Sec:224
dasd(eckd): 0.0.0150: (4kB blks): 1080000kB at 48kB/trk compatible
disk layout
dasda:VOL1/ LX0150: dasda1
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
"INIT: version 2.86 booting""
Starting the hotplug events dispatcher: udevdudevd version 125 started
."
Synthesizing the initial hotplug events...
done."
Waiting for /dev to be fully populated...
qeth: loading qeth S/390 OSA-Express driver
vmur: z/VM virtual unit record device driver loaded.
dasd(fba): 0.0.0151: 9336/10(CU:6310/80) 48MB at(512 B/blk)
dasdb:CMS1/ LXSWAP(MDSK): dasdb1
qeth: Device 0.0.0340/0.0.0341/0.0.0342 is a Guest LAN QDIO card
(level: V52I)
with link type GuestLAN QDIO (portname: )
qeth: Hardware IP fragmentation not supported on eth0
qeth: VLAN enabled
qeth: Multicast enabled
qeth: IPV6 enabled
qeth: Broadcast enabled
qeth: Using SW checksumming on eth0.
qeth: Outbound TSO not supported on eth0
done."
Activating swap...Adding 49572k swap on /dev/dasdb1. Priority:-1
extents:1 acro
ss:49572k
done."
Checking root file system...fsck 1.41.3 (12-Oct-2008)"
/dev/dasda1: clean, 13017/135072 files, 115467/269976 blocks"
done."
EXT3 FS on dasda1, internal journal
Cleaning up ifupdown...
."
Loading kernel modules...
loop: module loaded
done."
Loading device-mapper supportdevice-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-de...@redhat.com
."
Checking file systems...fsck 1.41.3 (12-Oct-2008)"
done."
Setting kernel variables (/etc/sysctl.conf)...done."
Mounting local filesystems...done."
Activating swapfile swap...done."
Setting up networking...."
Configuring network interfaces...
done."
"INIT: Entering runlevel: 2""
Starting system log daemon...
."
Starting kernel log daemon...
."
Starting OpenBSD Secure Shell server: sshd
."
Not starting internet superserver: no services enabled."
Starting periodic command scheduler: crond
."
"
Debian GNU/Linux 5.0 e2l console"
"
e2l login:
CP SPOOL CONS CLOSE
===end console log===
Adam
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
