Your message dated Sat, 21 Feb 2009 19:17:38 +0100 with message-id <[email protected]> and subject line Re: linux-image-2.6.22-1-powerpc: Oops with sata_sil has caused the Debian Bug report #436885, regarding linux-image-2.6.22-1-powerpc: Oops with sata_sil to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 436885: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=436885 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-image-2.6.22-1-powerpc Version: 2.6.22-3 Severity: important Hi ! I have a external SATA hard drive connected to an PCMCIA eSATA (I experienced the same problem with a SATA PCMCIA controller) controller (sata_sil). My computer is a powerpc (titanium). All my files are on XFS, the external hard drive is XFS formatted too. In order to be able to access the hard drive I have to unplug it and replug it on the other eSATA port, and switch back to the first and so on until the drive is recognized. I have the Oops at the end of the kernel log when I make a heavy or exhaustive operation, for example : xfs_check, updatedb, or find /mountpoint Here the PCMCIA card detection log : pccard: CardBus card inserted into slot 0 SCSI subsystem initialized libata version 2.21 loaded. sata_sil 0001:11:00.0: version 2.2 PCI: Enabling device 0001:11:00.0 (0000 -> 0003) sata_sil 0001:11:00.0: cache line size not set. Driver may not function sata_sil 0001:11:00.0: Applying R_ERR on DMA activate FIS errata fix scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 cmd 0xf209e080 ctl 0xf209e08a bmdma 0xf209e000 irq 58 ata2: SATA max UDMA/100 cmd 0xf209e0c0 ctl 0xf209e0ca bmdma 0xf209e008 irq 58 ata1: SATA link down (SStatus 0 SControl 310) ata2: SATA link down (SStatus 0 SControl 310) Here begin the unplug/plug game until I win (the hard disk is recognized) : ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen ata2: hard resetting port ata2: port is slow to respond, please be patient (Status 0xff) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2: EH complete ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen ata2: hard resetting port ata2: SATA link down (SStatus 0 SControl 310) ata2: EH complete ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1: EH complete ata1: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen ata1: hard resetting port ata1: SATA link down (SStatus 0 SControl 310) ata1: EH complete ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/100 ata2: EH complete scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk I mount it in order to replay the internal log, I umount and I run the xfs_check on it : XFS mounting filesystem sda1 Starting XFS recovery on filesystem: sda1 (logdev: internal) Ending XFS recovery on filesystem: sda1 (logdev: internal) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xc0009) ata2.00: cmd c8/00:1e:11:c0:7c/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xc0009) ata2.00: cmd c8/00:02:8f:58:9b/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xd0009) ata2.00: cmd c8/00:1e:21:bd:a7/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xc0009) ata2.00: cmd c8/00:02:ff:c7:a8/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Machine check in kernel mode. Caused by (from SRR1=141030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] PowerMac Modules linked in: sd_mod nfsd exportfs lp parport cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative nfs lockd nfs_acl sunrpc ipv6 ext2 mbcache sha256 aes cbc blkcipher dm_crypt dm_snapshot dm_mirror dm_mod firewire_sbp2 loop sata_sil libata scsi_mod pcmcia firmware_class snd_aoa_i2sbus snd_pcm snd_timer snd_page_alloc snd soundcore snd_aoa_soundbus yenta_socket rsrc_nonstatic pcmcia_core uninorth_agp agpgart tsdev evdev xfs ide_cd cdrom ide_disk sungem sungem_phy firewire_ohci firewire_core crc_itu_t i2c_powermac NIP: c0015fc4 LR: f252d564 CTR: c0015fbc REGS: c21d5e60 TRAP: 0200 Not tainted (2.6.22-1-powerpc) MSR: 00141030 <ME,IR,DR> CR: 24000082 XER: 20000000 TASK = cfd9cc70[1515] 'scsi_eh_1' THREAD: c21d4000 GPR00: 00000000 c21d5f10 cfd9cc70 00000000 f209e008 f2528ca8 f2525468 f2524c38 GPR08: 00000000 f21de2c8 00800000 c0015fbc 00000000 00000000 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 016c759c 41400000 GPR24: f2528474 f2524c38 f2525468 f2528ca8 00009032 00000000 efd78a30 efd78000 NIP [c0015fc4] ioread8+0x8/0x18 LR [f252d564] ata_altstatus+0x30/0x44 [libata] Call Trace: [c21d5f20] [f252d6a8] ata_bmdma_drive_eh+0xd0/0x148 [libata] [c21d5f50] [f253004c] ata_scsi_error+0x1f4/0x450 [libata] [c21d5f80] [f246aac4] scsi_error_handler+0xd0/0x4f0 [scsi_mod] [c21d5fd0] [c0041004] kthread+0x4c/0x88 [c21d5ff0] [c0013774] kernel_thread+0x44/0x60 Instruction dump: 2f84011e 38600004 4d9a0020 419e0014 38600000 4e800020 38600002 4e800020 38600003 4e800020 7c0004ac 88630000 <0c030000> 4c00012c 5463063e 4e800020 -- Package-specific info: ** Version: Linux version 2.6.22-1-powerpc (Debian 2.6.22-3) ([email protected]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 Sun Jul 29 13:58:06 CEST 2007 ** Not tainted ** Kernel log: ata2: port is slow to respond, please be patient (Status 0xff) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2: EH complete ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen ata2: hard resetting port ata2: SATA link down (SStatus 0 SControl 310) ata2: EH complete ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1: EH complete ata1: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen ata1: hard resetting port ata1: SATA link down (SStatus 0 SControl 310) ata1: EH complete ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0x2 frozen ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/100 ata2: EH complete scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk XFS mounting filesystem sda1 Starting XFS recovery on filesystem: sda1 (logdev: internal) Ending XFS recovery on filesystem: sda1 (logdev: internal) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xc0009) ata2.00: cmd c8/00:1e:11:c0:7c/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xc0009) ata2.00: cmd c8/00:02:8f:58:9b/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xd0009) ata2.00: cmd c8/00:1e:21:bd:a7/00:00:00:00:00/e1 tag 0 cdb 0x0 data 15360 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0 ata2.00: (BMDMA2 stat 0xc0009) ata2.00: cmd c8/00:02:ff:c7:a8/00:00:00:00:00/e1 tag 0 cdb 0x0 data 1024 in res 51/00:00:01:00:00/00:00:00:00:00/e1 Emask 0x1 (device error) ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Machine check in kernel mode. Caused by (from SRR1=141030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] PowerMac Modules linked in: sd_mod nfsd exportfs lp parport cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative nfs lockd nfs_acl sunrpc ipv6 ext2 mbcache sha256 aes cbc blkcipher dm_crypt dm_snapshot dm_mirror dm_mod firewire_sbp2 loop sata_sil libata scsi_mod pcmcia firmware_class snd_aoa_i2sbus snd_pcm snd_timer snd_page_alloc snd soundcore snd_aoa_soundbus yenta_socket rsrc_nonstatic pcmcia_core uninorth_agp agpgart tsdev evdev xfs ide_cd cdrom ide_disk sungem sungem_phy firewire_ohci firewire_core crc_itu_t i2c_powermac NIP: c0015fc4 LR: f252d564 CTR: c0015fbc REGS: c21d5e60 TRAP: 0200 Not tainted (2.6.22-1-powerpc) MSR: 00141030 <ME,IR,DR> CR: 24000082 XER: 20000000 TASK = cfd9cc70[1515] 'scsi_eh_1' THREAD: c21d4000 GPR00: 00000000 c21d5f10 cfd9cc70 00000000 f209e008 f2528ca8 f2525468 f2524c38 GPR08: 00000000 f21de2c8 00800000 c0015fbc 00000000 00000000 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 016c759c 41400000 GPR24: f2528474 f2524c38 f2525468 f2528ca8 00009032 00000000 efd78a30 efd78000 NIP [c0015fc4] ioread8+0x8/0x18 LR [f252d564] ata_altstatus+0x30/0x44 [libata] Call Trace: [c21d5f20] [f252d6a8] ata_bmdma_drive_eh+0xd0/0x148 [libata] [c21d5f50] [f253004c] ata_scsi_error+0x1f4/0x450 [libata] [c21d5f80] [f246aac4] scsi_error_handler+0xd0/0x4f0 [scsi_mod] [c21d5fd0] [c0041004] kthread+0x4c/0x88 [c21d5ff0] [c0013774] kernel_thread+0x44/0x60 Instruction dump: 2f84011e 38600004 4d9a0020 419e0014 38600000 4e800020 38600002 4e800020 38600003 4e800020 7c0004ac 88630000 <0c030000> 4c00012c 5463063e 4e800020 ** Loaded modules: Module Size Used by sd_mod 32688 2 nfsd 245296 13 exportfs 6272 1 nfsd lp 13516 0 parport 43248 1 lp cpufreq_userspace 4564 0 cpufreq_stats 6148 0 cpufreq_powersave 1792 0 cpufreq_ondemand 9128 0 cpufreq_conservative 8064 0 nfs 281736 0 lockd 77592 3 nfsd,nfs nfs_acl 4000 2 nfsd,nfs sunrpc 198948 11 nfsd,nfs,lockd,nfs_acl ipv6 290892 38 ext2 77832 1 mbcache 9540 1 ext2 sha256 9664 0 aes 27528 4 cbc 5184 2 blkcipher 7780 1 cbc dm_crypt 16328 1 dm_snapshot 20480 0 dm_mirror 24896 0 dm_mod 65600 7 dm_crypt,dm_snapshot,dm_mirror firewire_sbp2 13732 0 loop 21412 0 sata_sil 12968 1 libata 137088 1 sata_sil scsi_mod 181100 3 sd_mod,firewire_sbp2,libata pcmcia 45936 0 firmware_class 11232 1 pcmcia snd_aoa_i2sbus 24388 0 snd_pcm 92324 1 snd_aoa_i2sbus snd_timer 26084 1 snd_pcm snd_page_alloc 11272 1 snd_pcm snd 67476 3 snd_aoa_i2sbus,snd_pcm,snd_timer soundcore 8900 1 snd snd_aoa_soundbus 7908 1 snd_aoa_i2sbus yenta_socket 29740 2 rsrc_nonstatic 12704 1 yenta_socket pcmcia_core 47096 3 pcmcia,yenta_socket,rsrc_nonstatic uninorth_agp 11724 1 agpgart 40284 1 uninorth_agp tsdev 9504 0 evdev 12416 0 xfs 542908 4 ide_cd 47236 0 cdrom 43196 1 ide_cd ide_disk 19904 7 sungem 35140 0 sungem_phy 12896 1 sungem firewire_ohci 20544 0 firewire_core 49528 2 firewire_sbp2,firewire_ohci crc_itu_t 2080 1 firewire_core i2c_powermac 5952 0 ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 AGP [106b:002d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M6 LY [1002:4c59] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Radeon Mobility M6 LY [1002:4c59] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at f1000000 [size=128K] Capabilities: <access denied> 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 PCI [106b:002e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo Mac I/O [106b:0022] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K] 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K] 0001:10:1a.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 58 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=10, secondary=11, subordinate=14, sec-latency=176 Memory window 0: 90000000-9ffff000 (prefetchable) Memory window 1: f3000000-f33ff000 I/O window 0: 00001000-00008fff I/O window 1: 00009000-000091ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 0001:11:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01) Subsystem: Silicon Image, Inc. SiI 3512 SATALink Controller [1095:3512] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 58 Region 0: I/O ports at 1010 [size=8] Region 1: I/O ports at 1020 [size=4] Region 2: I/O ports at 1018 [size=8] Region 3: I/O ports at 1024 [size=4] Region 4: I/O ports at 1000 [size=16] Region 5: Memory at f3000000 (32-bit, non-prefetchable) [size=512] [virtual] Expansion ROM at 90000000 [disabled] [size=512K] Capabilities: <access denied> 0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 Internal PCI [106b:002f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes 0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (prog-if 10 [OHCI]) Subsystem: Agere Systems FW323 [11c1:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: powerpc (ppc) Kernel: Linux 2.6.22-1-powerpc Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-1-powerpc depends on: ii initramfs-tools [linux-initr 0.89 tools for generating an initramfs ii mkvmlinuz 33 create a kernel to boot a PowerPC ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.22-1-powerpc recommends no packages. -- debconf information: linux-image-2.6.22-1-powerpc/preinst/abort-overwrite-2.6.22-1-powerpc: linux-image-2.6.22-1-powerpc/postinst/bootloader-error-2.6.22-1-powerpc: linux-image-2.6.22-1-powerpc/postinst/depmod-error-initrd-2.6.22-1-powerpc: false linux-image-2.6.22-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.22-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.22-1-powerpc/prerm/removing-running-kernel-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/postinst/create-kimage-link-2.6.22-1-powerpc: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-1-powerpc/preinst/lilo-initrd-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/postinst/old-system-map-link-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/preinst/initrd-2.6.22-1-powerpc: linux-image-2.6.22-1-powerpc/preinst/already-running-this-2.6.22-1-powerpc: linux-image-2.6.22-1-powerpc/postinst/bootloader-test-error-2.6.22-1-powerpc: linux-image-2.6.22-1-powerpc/preinst/failed-to-move-modules-2.6.22-1-powerpc: linux-image-2.6.22-1-powerpc/preinst/bootloader-initrd-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/prerm/would-invalidate-boot-loader-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/postinst/depmod-error-2.6.22-1-powerpc: false linux-image-2.6.22-1-powerpc/postinst/old-dir-initrd-link-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/postinst/old-initrd-link-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/preinst/overwriting-modules-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/preinst/elilo-initrd-2.6.22-1-powerpc: true linux-image-2.6.22-1-powerpc/preinst/abort-install-2.6.22-1-powerpc:
--- End Message ---
--- Begin Message ---On Thu, Aug 09, 2007 at 11:11:13AM +0200, Romain Chantereau wrote: > Package: linux-image-2.6.22-1-powerpc > Version: 2.6.22-3 > Severity: important > > Hi ! > > I have a external SATA hard drive connected to an PCMCIA eSATA (I experienced > the same problem with a SATA PCMCIA controller) controller (sata_sil). > My computer is a powerpc (titanium). > All my files are on XFS, the external hard drive is XFS formatted too. > > In order to be able to access the hard drive I have to unplug it and replug it > on the other eSATA port, and switch back to the first and so on until the > drive > is recognized. > > I have the Oops at the end of the kernel log when I make a heavy or exhaustive > operation, for example : xfs_check, updatedb, or find /mountpoint This bug report has been pinged at least twice for more information, so I'm closing it now. If anyone reencounters the problem, please reopen this bug. Cheers, Moritz
--- End Message ---
