Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-13 Severity: important
Error reported by Update Manager: E: /var/cache/apt/archives/linux-image-2.6.26-1-amd64_2.6.26-13lenny2_amd64.deb: failed in buffer_write(fd) (10, ret=-1) -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009 ** Command line: root=/dev/sdb1 ro quiet ** Not tainted ** Kernel log: [ 9.715329] sd 0:0:0:0: [sda] Write Protect is off [ 9.715331] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.715347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.719135] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 9.719135] sd 0:0:0:0: [sda] Write Protect is off [ 9.719135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.719135] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.719135] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 9.735079] sda1 [ 9.735171] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.735171] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 9.735171] sd 2:0:0:0: [sdb] Write Protect is off [ 9.735171] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.735171] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.735171] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 9.735171] sd 2:0:0:0: [sdb] Write Protect is off [ 9.735171] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.735171] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.735171] sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.737334] Uniform CD-ROM driver Revision: 3.20 [ 9.737334] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.739258] sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 > [ 9.776114] sd 2:0:0:0: [sdb] Attached SCSI disk [ 9.781335] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.781335] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 9.788117] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.788117] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.788117] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 9.788117] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 9.798987] usb 3-2: configuration #1 chosen from 1 choice [ 9.800765] usb 3-2: New USB device found, idVendor=0d62, idProduct=001c [ 9.800768] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.800770] usb 3-2: Product: USB+PS2 Keyboard [ 9.800771] usb 3-2: Manufacturer: Generic [ 9.802654] usbcore: registered new interface driver hiddev [ 9.876287] hiddev96hidraw0: USB HID v1.10 Device [CPS CP685AVR-G] on usb-0000:00:13.0-2 [ 9.887182] input: Kensington USB/PS2 Wheel Mouse as /class/input/input1 [ 9.904698] input,hidraw1: USB HID v1.10 Mouse [Kensington USB/PS2 Wheel Mouse] on usb-0000:00:13.1-1 [ 9.912656] input: Generic USB+PS2 Keyboard as /class/input/input2 [ 9.936694] input,hidraw2: USB HID v1.10 Keyboard [Generic USB+PS2 Keyboard] on usb-0000:00:13.1-2 [ 9.951606] input: Generic USB+PS2 Keyboard as /class/input/input3 [ 9.971633] input,hidraw3: USB HID v1.10 Device [Generic USB+PS2 Keyboard] on usb-0000:00:13.1-2 [ 9.971647] usbcore: registered new interface driver usbhid [ 9.971650] usbhid: v2.6:USB HID core driver [ 10.051609] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 10.051609] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 10.051609] scsi6 : pata_marvell [ 10.051609] scsi7 : pata_marvell [ 10.051609] ata7: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 19 [ 10.051609] ata8: PATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 19 [ 10.483843] PM: Starting manual resume from disk [ 10.547425] kjournald starting. Commit interval 5 seconds [ 10.547425] EXT3-fs: mounted filesystem with ordered data mode. [ 11.058840] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001247c27] [ 11.699258] udevd version 125 started [ 12.195605] input: Power Button (FF) as /class/input/input4 [ 12.260979] ACPI: Power Button (FF) [PWRF] [ 12.261071] input: Power Button (CM) as /class/input/input5 [ 12.330571] ACPI: Power Button (CM) [PWRB] [ 12.330671] ACPI: WMI: Mapper loaded [ 12.395519] input: PC Speaker as /class/input/input6 [ 12.533940] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 12.761113] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.790612] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... [ 14.661573] Adding 24001068k swap on /dev/sdb7. Priority:-1 extents:1 across:24001068k [ 14.870285] EXT3 FS on sdb1, internal journal [ 15.818585] loop: module loaded [ 16.957661] kjournald starting. Commit interval 5 seconds [ 16.957661] EXT3 FS on sdb9, internal journal [ 16.957661] EXT3-fs: mounted filesystem with ordered data mode. [ 16.971985] kjournald starting. Commit interval 5 seconds [ 16.971985] EXT3 FS on sdb8, internal journal [ 16.971985] EXT3-fs: mounted filesystem with ordered data mode. [ 16.983985] kjournald starting. Commit interval 5 seconds [ 16.987450] EXT3 FS on sdb5, internal journal [ 16.987450] EXT3-fs: mounted filesystem with ordered data mode. [ 17.007445] kjournald starting. Commit interval 5 seconds [ 17.007445] EXT3 FS on sdb6, internal journal [ 17.007445] EXT3-fs: mounted filesystem with ordered data mode. [ 17.781016] usb 2-2: USB disconnect, address 2 [ 18.625344] sky2 eth0: enabling interface [ 20.594014] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 20.756557] usb 2-2: configuration #1 chosen from 1 choice [ 20.832696] hiddev96hidraw0: USB HID v1.10 Device [CPS CP685AVR-G] on usb-0000:00:13.0-2 [ 20.832696] usb 2-2: New USB device found, idVendor=0764, idProduct=0501 [ 20.832696] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 20.832696] usb 2-2: Product: CP685AVR-G [ 20.832696] usb 2-2: Manufacturer: CPS [ 21.057722] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 21.398876] powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 21.398876] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. [ 21.398876] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. [ 21.398876] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. [ 21.398877] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. [ 22.359544] NET: Registered protocol family 10 [ 22.359544] lo: Disabled Privacy Extensions [ 22.920279] pnp: the driver 'parport_pc' has been registered [ 22.922856] lp: driver loaded but no devices found [ 22.950973] ppdev: user-space parallel port driver [ 42.764132] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by battery 16904 0 ppdev 11656 0 parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp ipv6 288328 22 cpufreq_userspace 8452 0 cpufreq_conservative 11784 0 cpufreq_ondemand 11792 0 cpufreq_stats 9120 0 cpufreq_powersave 6400 0 freq_table 9344 2 cpufreq_ondemand,cpufreq_stats loop 19468 0 snd_hda_intel 434904 1 snd_pcm 81672 1 snd_hda_intel snd_seq 54304 0 snd_timer 25744 2 snd_pcm,snd_seq snd_seq_device 11668 1 snd_seq snd 63688 7 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device psmouse 42268 0 soundcore 12064 1 snd i2c_piix4 13072 0 serio_raw 9860 0 snd_page_alloc 13072 2 snd_hda_intel,snd_pcm pcspkr 7040 0 i2c_core 27936 1 i2c_piix4 wmi 11712 0 button 11680 0 evdev 14208 4 ext3 125072 5 jbd 51240 1 ext3 mbcache 12804 1 ext3 sg 36448 0 usbhid 45792 1 hid 41792 1 usbhid ff_memless 9224 1 usbhid sr_mod 19652 0 sd_mod 29376 7 cdrom 37928 1 sr_mod ata_generic 10116 0 pata_marvell 8832 0 ohci1394 32564 0 ieee1394 93816 1 ohci1394 ide_pci_generic 9220 0 [permanent] atiixp 8324 0 [permanent] ohci_hcd 25092 0 ahci 33036 6 libata 165472 3 ata_generic,pata_marvell,ahci scsi_mod 160760 4 sg,sr_mod,sd_mod,libata dock 14112 1 libata ehci_hcd 36108 0 ide_core 128284 2 ide_pci_generic,atiixp sky2 48004 0 thermal 22688 0 processor 42304 1 thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fe700000-fe7fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:04.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) [1002:597a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000efff Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 8000 [size=8] Region 1: I/O ports at 7000 [size=4] Region 2: I/O ports at 6000 [size=8] Region 3: I/O ports at 5000 [size=4] Region 4: I/O ports at 4000 [size=16] Region 5: Memory at fe6ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6fb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: ATIIXP_IDE Kernel modules: ata_generic, ide-pci-generic, atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: ASUSTeK Computer Inc. Device [1043:8288] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV515GL [FireGL V3300] (Primary) [1002:7152] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device [1002:0b02] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 9000 [size=256] Expansion ROM at fe7c0000 [disabled] [size=128K] Capabilities: <access denied> 01:00.1 Display controller [0380]: ATI Technologies Inc RV515GL [FireGL V3300] (Secondary) [1002:7172] Subsystem: ATI Technologies Inc Device [1002:0b03] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fe7e0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at b400 [size=4] Region 2: I/O ports at b000 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a400 [size=16] Region 5: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell Kernel modules: ahci, pata_marvell, ata_generic, ide-pci-generic 03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Device [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1275 Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at c800 [size=256] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 Kernel modules: sky2 04:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at e800 [size=8] Region 1: I/O ports at e400 [size=4] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at d800 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell Kernel modules: ahci, pata_marvell, ata_generic, ide-pci-generic 05:08.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8294] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
