Package: linux-image-2.6.26-2-vserver-686-bigmem Version: 2.6.26-15lenny2 Severity: important
System is a Dell R610 with 16GB of RAM but only the first 3.2GB is currently being detected. This is using a bigmem kernel so should expect to see all 16GB. Not quite sure where to start looking into this but a colleague suspects that it may be related to some E820 patches made by Paul Jackson in May 2008. Commit refs in linux-2.6 git tree are: c3965bd15118742d72b4bc1a290d37b3f081eb98 028b785888c523baccdf27af0cdbf1deb92edec0 6e9bcc796b120d17b08dde7ab958b82ddb899889 5b7eb2e9ef4e467a1248537b47a63bab265be3cc 69c9189320c46b14e5ae3ad4b3a0d35cc63cba20 with a later bug fix in commit: 1b72691ce35812ff865d778f303779e774d2b098 I haven't had a chance to try building this patch into the kernel yet to see if this resolves the issue. I've also tried using a standard bigmem kernel (no vserver) and the same problem is reported. -- Package-specific info: ** Version: Linux version 2.6.26-2-vserver-686-bigmem (Debian 2.6.26-15lenny2) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Mon May 11 21:25:01 UTC 2009 ** Command line: root=/dev/mapper/vg0-root ro ** Not tainted ** Kernel log: [ 57.137973] raid6: sse2x1 6599 MB/s [ 57.206017] raid6: sse2x2 7757 MB/s [ 57.206017] raid6: using algorithm sse2x2 (7757 MB/s) [ 57.206017] md: raid6 personality registered for level 6 [ 57.206017] md: raid5 personality registered for level 5 [ 57.206017] md: raid4 personality registered for level 4 [ 57.213883] md: md0 stopped. [ 57.744540] md: md1 stopped. [ 57.767236] md: bind<sdb2> [ 57.767475] md: bind<sdc2> [ 57.767719] md: bind<sdd2> [ 57.767958] md: bind<sda2> [ 57.785268] raid5: device sda2 operational as raid disk 0 [ 57.785268] raid5: device sdc2 operational as raid disk 2 [ 57.785268] raid5: device sdb2 operational as raid disk 1 [ 57.785349] raid5: allocated 3170kB for md1 [ 57.785349] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 57.785349] RAID5 conf printout: [ 57.785349] --- rd:3 wd:3 [ 57.785349] disk 0, o:1, dev:sda2 [ 57.785349] disk 1, o:1, dev:sdb2 [ 57.785349] disk 2, o:1, dev:sdc2 [ 57.820865] md: bind<sda1> [ 57.821018] md: bind<sdc1> [ 57.821188] md: bind<sdb1> [ 57.821345] md: bind<sdd1> [ 57.842833] raid1: raid set md0 active with 4 out of 4 mirrors [ 57.913540] device-mapper: uevent: version 1.0.3 [ 57.913600] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected] [ 58.191150] PM: Starting manual resume from disk [ 58.218329] kjournald starting. Commit interval 5 seconds [ 58.218329] EXT3-fs: mounted filesystem with ordered data mode. [ 59.156079] udevd version 125 started [ 59.618058] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 59.850599] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 59.850599] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 59.850599] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 59.901280] input: Power Button (FF) as /class/input/input3 [ 59.925056] ACPI: Power Button (FF) [PWRF] [ 59.937917] input: PC Speaker as /class/input/input4 [ 60.751806] EXT3 FS on dm-0, internal journal [ 61.206319] loop: module loaded [ 68.757434] kjournald starting. Commit interval 5 seconds [ 68.775713] EXT3 FS on md0, internal journal [ 68.775713] EXT3-fs: mounted filesystem with ordered data mode. [ 68.778328] kjournald starting. Commit interval 5 seconds [ 68.782095] EXT3 FS on dm-1, internal journal [ 68.782095] EXT3-fs: mounted filesystem with ordered data mode. [ 68.790485] kjournald starting. Commit interval 5 seconds [ 68.820577] EXT3 FS on dm-2, internal journal [ 68.820577] EXT3-fs: mounted filesystem with ordered data mode. [ 68.828855] kjournald starting. Commit interval 5 seconds [ 68.873861] EXT3 FS on dm-4, internal journal [ 68.873861] EXT3-fs: mounted filesystem with ordered data mode. [ 68.879519] kjournald starting. Commit interval 5 seconds [ 68.897229] EXT3 FS on dm-5, internal journal [ 68.897229] EXT3-fs: mounted filesystem with ordered data mode. [ 68.905187] kjournald starting. Commit interval 5 seconds [ 68.922797] EXT3 FS on dm-6, internal journal [ 68.922797] EXT3-fs: mounted filesystem with ordered data mode. [ 68.958636] Adding 7811064k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:7811064k [ 69.644690] ip_tables: (C) 2000-2006 Netfilter Core Team [ 70.294030] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 70.734394] bnx2: eth0: using MSIX [ 70.734669] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.226705] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> [ 71.226705] All bugs added by David S. Miller <[email protected]> [ 71.307617] ADDRCONF(NETDEV_UP): eth0.1234: link is not ready [ 74.893376] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex [ 74.893376] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 74.893376] ADDRCONF(NETDEV_CHANGE): eth0.1234: link becomes ready [ 80.207299] ipmi message handler version 39.2 [ 80.284014] IPMI System Interface driver. [ 80.284014] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 80.413534] ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 80.413534] IPMI kcs interface initialized [ 80.431921] ipmi device interface [ 81.381714] Not cloning cgroup for unused subsystem ns [ 81.383239] Not cloning cgroup for unused subsystem ns [ 81.448114] CE: hpet increasing min_delta_ns to 15000 nsec [ 81.840777] Not cloning cgroup for unused subsystem ns [ 81.840777] Not cloning cgroup for unused subsystem ns [ 83.510514] dummy0: no IPv6 routers present [ 89.036189] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 89.560164] eth0: no IPv6 routers present [ 90.728597] eth0.1234: no IPv6 routers present [ 119.381735] CE: hpet increasing min_delta_ns to 22500 nsec [ 1124.956006] CE: hpet increasing min_delta_ns to 33750 nsec [ 6245.980812] CE: hpet increasing min_delta_ns to 50624 nsec [ 7562.153029] usb 5-3.2: USB disconnect, address 3 [42379.491560] bnx2: eth0 NIC Copper Link is Down [43684.428257] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [43722.324028] bnx2: eth0 NIC Copper Link is Down [43727.811074] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [43729.413891] bnx2: eth0 NIC Copper Link is Down [43732.460827] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [46224.701583] bnx2: eth0 NIC Copper Link is Down [46227.302890] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [72890.868115] bnx2: eth0 NIC Copper Link is Down [72901.047313] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ** Loaded modules: Module Size Used by ipmi_devintf 6984 0 ipmi_si 34124 0 ipmi_msghandler 30360 2 ipmi_devintf,ipmi_si dummy 3232 0 8021q 16832 0 ipt_MASQUERADE 3360 2 iptable_nat 5448 1 nf_nat 16312 2 ipt_MASQUERADE,iptable_nat xt_tcpudp 3584 7 nf_conntrack_ipv4 13036 4 iptable_nat,nf_nat xt_state 2784 1 nf_conntrack 56308 5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state iptable_filter 3392 1 ip_tables 10928 2 iptable_nat,iptable_filter x_tables 14052 5 ipt_MASQUERADE,iptable_nat,xt_tcpudp,xt_state,ip_tables loop 13676 0 serio_raw 5508 0 pcspkr 3200 0 psmouse 33104 0 button 6864 0 iTCO_wdt 10276 0 evdev 8768 0 dcdbas 7076 0 ext3 109032 7 jbd 40212 1 ext3 mbcache 7876 1 ext3 dm_mirror 15872 0 dm_log 9252 1 dm_mirror dm_snapshot 15108 0 dm_mod 47368 19 dm_mirror,dm_log,dm_snapshot raid456 117776 1 async_xor 3200 1 raid456 async_memcpy 2560 1 raid456 async_tx 3168 1 raid456 xor 15464 2 raid456,async_xor raid1 18784 1 md_mod 67804 4 raid456,raid1 sg 27732 0 sr_mod 14084 0 cdrom 30976 1 sr_mod sd_mod 22968 12 ide_pci_generic 4676 0 [permanent] ide_core 96968 1 ide_pci_generic usbhid 36704 0 hid 33952 1 usbhid ff_memless 5160 1 usbhid ata_generic 5444 0 mptsas 23976 8 mptscsih 22624 1 mptsas ata_piix 15012 0 mptbase 52580 2 mptsas,mptscsih libata 141280 2 ata_generic,ata_piix scsi_transport_sas 26240 1 mptsas dock 9072 1 libata scsi_mod 130092 7 sg,sr_mod,sd_mod,mptsas,mptscsih,libata,scsi_transport_sas ehci_hcd 29388 0 uhci_hcd 19504 0 usbcore 119248 4 usbhid,ehci_hcd,uhci_hcd bnx2 54536 0 firmware_class 7584 1 bnx2 thermal 15996 0 processor 33504 17 thermal fan 4932 0 thermal_sys 11624 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3403] (rev 13) Subsystem: Dell Device [1028:0236] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 15 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d6000000-d9ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: da000000-ddffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at ec40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at ec60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 0: Memory at df0ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: df100000-df2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at ec80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at eca0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at df0ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: de000000-deffffff Prefetchable memory behind bridge: 00000000d5800000-00000000d5ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 0: I/O ports at ec10 [size=8] Region 1: I/O ports at ec08 [size=4] Region 2: I/O ports at ec18 [size=8] Region 3: I/O ports at ec0c [size=4] Region 4: I/O ports at ec20 [size=16] Region 5: I/O ports at ec30 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 36 Region 0: Memory at d6000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 Kernel modules: bnx2 01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 48 Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 Kernel modules: bnx2 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 Kernel modules: bnx2 02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 42 Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 Kernel modules: bnx2 03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08) Subsystem: Dell SAS 6/iR Integrated RAID Controller [1028:1f10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 218 Region 0: I/O ports at fc00 [size=256] Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at df100000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: mptsas Kernel modules: mptsas 06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton [102b:0532] (rev 0a) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0236] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d5800000 (32-bit, prefetchable) [size=8M] Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at de000000 [disabled] [size=64K] Capabilities: <access denied> ** Sound cards: -- System Information: Debian Release: 5.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-vserver-686-bigmem (SMP w/16 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-vserver-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-vserver-686-bigmem recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-vserver-686-bigmem suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-vserver-686-bigmem/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-vserver-686-bigmem/postinst/bootloader-test-error-2.6.26-2-vserver-686-bigmem: linux-image-2.6.26-2-vserver-686-bigmem/preinst/elilo-initrd-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/preinst/abort-overwrite-2.6.26-2-vserver-686-bigmem: linux-image-2.6.26-2-vserver-686-bigmem/postinst/depmod-error-2.6.26-2-vserver-686-bigmem: false linux-image-2.6.26-2-vserver-686-bigmem/preinst/abort-install-2.6.26-2-vserver-686-bigmem: linux-image-2.6.26-2-vserver-686-bigmem/postinst/kimage-is-a-directory: linux-image-2.6.26-2-vserver-686-bigmem/preinst/initrd-2.6.26-2-vserver-686-bigmem: linux-image-2.6.26-2-vserver-686-bigmem/postinst/bootloader-error-2.6.26-2-vserver-686-bigmem: linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-system-map-link-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/preinst/failed-to-move-modules-2.6.26-2-vserver-686-bigmem: linux-image-2.6.26-2-vserver-686-bigmem/postinst/depmod-error-initrd-2.6.26-2-vserver-686-bigmem: false linux-image-2.6.26-2-vserver-686-bigmem/postinst/create-kimage-link-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-initrd-link-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/prerm/removing-running-kernel-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/preinst/bootloader-initrd-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-dir-initrd-link-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/preinst/overwriting-modules-2.6.26-2-vserver-686-bigmem: true linux-image-2.6.26-2-vserver-686-bigmem/preinst/lilo-initrd-2.6.26-2-vserver-686-bigmem: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
