Package: linux-image-2.6.26-2-amd64 Version: 2.6.26-15lenny3 Severity: normal
hi, I have a American Power Conversion Uninterruptible Power Supply (see attachment for USB info) The USB cable is a bit loose and sometimes it misbehaves; in the last case, it filled the kern.log with the 52208 equal messages: " usbhid: control queue full" When I tried to adjust the cable, the kernel oopsesd as in attachement a. -- Package-specific info: ** Version: Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny3) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 21:28:49 UTC 2009 ** Command line: root=/dev/mapper/Tonelli--sata--lvm-Tonelli--sata--root ro ** Tainted: P (1) ** Loaded modules: Module Size Used by nls_utf8 6272 1 isofs 35880 1 nls_base 12932 2 nls_utf8,isofs zlib_inflate 18944 1 isofs nvidia 8105072 24 binfmt_misc 13580 1 rfcomm 38176 2 l2cap 23936 9 rfcomm bluetooth 57124 4 rfcomm,l2cap battery 16776 0 ppdev 11656 0 parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp ipv6 288328 24 dm_crypt 17032 0 crypto_blkcipher 21636 1 dm_crypt cpufreq_ondemand 11792 1 powernow_k8 17156 1 freq_table 9344 2 cpufreq_ondemand,powernow_k8 sbp2 25356 0 ieee1394 93816 1 sbp2 loop 19468 0 snd_hda_intel 436440 5 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss snd_pcm 81672 3 snd_hda_intel,snd_pcm_oss snd_seq_dummy 7428 0 snd_seq_oss 33280 0 snd_seq_midi 11072 0 snd_rawmidi 26784 1 snd_seq_midi snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event pcspkr 7040 0 serio_raw 9860 0 snd_timer 25744 3 snd_pcm,snd_seq snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 63688 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_piix4 13072 0 psmouse 42268 0 soundcore 12064 1 snd k8temp 9216 0 snd_page_alloc 13072 2 snd_hda_intel,snd_pcm i2c_core 27936 2 nvidia,i2c_piix4 button 11680 0 evdev 14208 4 ext3 124944 9 jbd 51240 1 ext3 mbcache 12804 1 ext3 dm_mirror 20608 0 dm_log 13956 1 dm_mirror dm_snapshot 19400 0 dm_mod 58864 19 dm_crypt,dm_mirror,dm_log,dm_snapshot ide_cd_mod 36360 1 cdrom 37928 1 ide_cd_mod ide_disk 16512 3 usbhid 45920 2 hid 41664 1 usbhid ff_memless 9224 1 usbhid sd_mod 29376 3 atiixp 8324 0 [permanent] ide_pci_generic 9220 0 [permanent] ide_core 128284 4 ide_cd_mod,ide_disk,atiixp,ide_pci_generic 8139cp 23808 0 8139too 28288 0 ata_generic 10116 0 ahci 33036 2 ehci_hcd 35980 0 libata 165600 2 ata_generic,ahci scsi_mod 160760 3 sbp2,sd_mod,libata dock 14112 1 libata ohci_hcd 25092 0 atl1 35464 0 mii 9856 3 8139cp,8139too,atl1 thermal 22816 0 processor 42304 2 powernow_k8,thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: ATIIXP_IDE Kernel modules: ata_generic, ide-pci-generic, atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ASUSTeK Computer Inc. Device [1043:82bb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8500 GT [10de:0421] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8264] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at d800 [size=128] [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. Device [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1277 Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at feaa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 Kernel modules: atl1 03:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp -- System Information: Debian Release: 5.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-2-amd64 recommends no packages. Versions of packages linux-image-2.6.26-2-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-2-amd64/postinst/depmod-error-2.6.26-2-amd64: false linux-image-2.6.26-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-amd64/preinst/abort-install-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/postinst/old-initrd-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/depmod-error-initrd-2.6.26-2-amd64: false linux-image-2.6.26-2-amd64/postinst/bootloader-test-error-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/overwriting-modules-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-2-amd64/prerm/would-invalidate-boot-loader-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/old-system-map-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/preinst/abort-overwrite-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/elilo-initrd-2.6.26-2-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-amd64/postinst/bootloader-error-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/lilo-initrd-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/old-dir-initrd-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/create-kimage-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/preinst/initrd-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/failed-to-move-modules-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/bootloader-initrd-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/prerm/removing-running-kernel-2.6.26-2-amd64: true -- Andrea Mennucc "The EULA sounds like it was written by a team of lawyers who want to tell me what I can't do, and the GPL sounds like it was written by a human being who wants me to know what I can do." Anonymous, http://www.securityfocus.com/columnists/420
usb 2-1: USB disconnect, address 4 BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 IP: [<ffffffffa0100d94>] :usbhid:hiddev_ioctl+0x39/0x54d PGD 7d034067 PUD 7d02f067 PMD 0 Oops: 0000 [1] SMP CPU 1 Modules linked in: sha256_generic aes_x86_64 aes_generic cbc nls_cp437 vfat fat usb_storage nls_utf8 isofs nls_base zlib_inflate nvidia(P) binfmt_misc rfcomm l2cap bluetooth battery ppdev parport_pc lp parport ipv6 dm_crypt crypto_blkcipher cpufreq_ondemand powernow_k8 freq_table sbp2 ieee1394 loop snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device serio_raw snd pcspkr psmouse i2c_piix4 soundcore k8temp i2c_core snd_page_alloc button evdev ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom ide_disk usbhid hid ff_memless sd_mod atiixp 8139cp ide_pci_generic ide_core 8139too ata_generic ehci_hcd ahci libata scsi_mod dock ohci_hcd atl1 mii thermal processor fan thermal_sys Pid: 3055, comm: apcupsd Tainted: P 2.6.26-2-amd64 #1 RIP: 0010:[<ffffffffa0100d94>] [<ffffffffa0100d94>] :usbhid:hiddev_ioctl+0x39/0x54d RSP: 0018:ffff81007d937e38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff81007cca4000 RCX: 00007fff74594bf0 RDX: 00000000fffffffb RSI: ffff810023ecf800 RDI: ffff81000969a9c0 RBP: 00007fff74594bf0 R08: 00000000400c4807 R09: 0000000000000000 R10: 00000000000e06af R11: ffffffff802f2039 R12: 00000000400c4807 R13: 00000000400c4807 R14: 0000000000000004 R15: 0000000000000000 FS: 00007fe16c5786e0(0000) GS:ffff81007fb989c0(0000) knlGS:00000000f7c53910 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000e8 CR3: 000000007d028000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process apcupsd (pid: 3055, threadinfo ffff81007d936000, task ffff81007e0be040) Stack: ffff81000101e3b8 ffffffff80248970 ffff81007d937eb8 00000000ffffffff 0000000000000286 ffffffff80248a34 0000000000000286 ffff81007d937eb8 0000000000000286 ffff81007d937eb8 0000000000000001 ffffffff80248a49 Call Trace: [<ffffffff80248970>] ? lock_hrtimer_base+0x1b/0x3c [<ffffffff80248a34>] ? hrtimer_try_to_cancel+0x67/0x70 [<ffffffff80248a49>] ? hrtimer_cancel+0xc/0x16 [<ffffffff80428a2b>] ? do_nanosleep+0x64/0x9c [<ffffffff80248c18>] ? hrtimer_nanosleep+0x54/0xbd [<ffffffff802a6649>] ? vfs_ioctl+0x55/0x6b [<ffffffff802a68a7>] ? do_vfs_ioctl+0x248/0x261 [<ffffffff80428a08>] ? do_nanosleep+0x41/0x9c [<ffffffff802a6911>] ? sys_ioctl+0x51/0x70 [<ffffffff8020beca>] ? system_call_after_swapgs+0x8a/0x8f Code: 53 48 81 ec 90 00 00 00 48 8b b6 98 00 00 00 48 8b be 18 06 00 00 48 8b 5f 20 83 3f 00 48 8b 83 80 18 00 00 4c 8b 8b b8 19 00 00 <48> 8b 88 e8 00 00 00 0f 84 f9 04 00 00 41 81 f8 01 48 04 80 0f RIP [<ffffffffa0100d94>] :usbhid:hiddev_ioctl+0x39/0x54d RSP <ffff81007d937e38> CR2: 00000000000000e8 ---[ end trace e174ae28437d5695 ]--- usb 2-1: new low speed USB device using ohci_hcd and address 5 usb 2-1: configuration #1 chosen from 1 choice hiddev96hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS 500 FW: 6.4.I USB FW: c1 ] on usb-0000:00:13.1-1 usb 2-1: New USB device found, idVendor=051d, idProduct=0002 usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 2-1: Product: Back-UPS 500 FW: 6.4.I USB FW: c1 usb 2-1: Manufacturer: American Power Conversion usb 2-1: SerialNumber: BB0309024776 Jun 25 14:17:14 tonelli kernel: Kernel logging (proc) stopped. Jun 25 14:17:14 tonelli kernel: Kernel log daemon terminating. Jun 25 14:20:29 tonelli kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
