Your message dated Wed, 22 Jul 2009 03:18:03 +0200
with message-id <1248225484.31599.140.ca...@localhost>
and subject line Re: Bug#537953: linux-image-2.6.30-1-amd64: no radeon DRI
has caused the Debian Bug report #537953,
regarding linux-image-2.6.30-1-amd64: no radeon DRI
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
537953: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=537953
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-3
Severity: normal
There is no DRI with X radeon driver and it seems somewhat related to
the log below.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-2) ([email protected]) (gcc version
4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 12:20:34 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64
root=UUID=ae7d5095-c8b3-4205-af0e-032b0e124ec3 ro
** Not tainted
** Kernel log:
[ 3484.894693] [drm] Setting GART location based on new memory map
[ 3484.894930] [drm] Loading R300 Microcode
[ 3484.894935] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 3484.964119] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 3484.964124] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 4430.834656] [drm] Setting GART location based on new memory map
[ 4430.834895] [drm] Loading R300 Microcode
[ 4430.834899] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 4430.884835] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 4430.884840] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 4736.982831] [drm] Setting GART location based on new memory map
[ 4736.983065] [drm] Loading R300 Microcode
[ 4736.983069] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 4737.028843] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 4737.028848] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11259.575109] [drm] Setting GART location based on new memory map
[11259.575344] [drm] Loading R300 Microcode
[11259.575349] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11259.620865] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11259.620870] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11289.913736] [drm] Setting GART location based on new memory map
[11289.913971] [drm] Loading R300 Microcode
[11289.913976] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11289.960849] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11289.960854] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11362.723557] [drm] Setting GART location based on new memory map
[11362.723793] [drm] Loading R300 Microcode
[11362.723798] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11362.768880] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11362.768885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11380.147089] [drm] Setting GART location based on new memory map
[11380.147325] [drm] Loading R300 Microcode
[11380.147329] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11380.192887] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11380.192892] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11397.407736] [drm] Setting GART location based on new memory map
[11397.407972] [drm] Loading R300 Microcode
[11397.407976] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11397.452885] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11397.452890] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11423.699820] [drm] Setting GART location based on new memory map
[11423.700076] [drm] Loading R300 Microcode
[11423.700081] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11423.744880] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11423.744885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11453.601961] [drm] Setting GART location based on new memory map
[11453.602198] [drm] Loading R300 Microcode
[11453.602202] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11453.648876] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11453.648881] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11464.537793] [drm] Setting GART location based on new memory map
[11464.538026] [drm] Loading R300 Microcode
[11464.538031] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11464.584895] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11464.584900] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11568.411815] [drm] Setting GART location based on new memory map
[11568.412066] [drm] Loading R300 Microcode
[11568.412071] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11568.456894] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11568.456899] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11639.963098] [drm] Setting GART location based on new memory map
[11639.963338] [drm] Loading R300 Microcode
[11639.963343] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11640.008822] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11640.008827] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11650.603470] [drm] Setting GART location based on new memory map
[11650.603703] [drm] Loading R300 Microcode
[11650.603708] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11650.648853] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11650.648858] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12048.389714] [drm] Setting GART location based on new memory map
[12048.389947] [drm] Loading R300 Microcode
[12048.389951] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12048.436822] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12048.436827] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12058.678711] [drm] Setting GART location based on new memory map
[12058.678943] [drm] Loading R300 Microcode
[12058.678948] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12058.724863] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12058.724868] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12116.302071] [drm] Setting GART location based on new memory map
[12116.302309] [drm] Loading R300 Microcode
[12116.302313] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12116.348878] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12116.348883] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12593.562522] [drm] Setting GART location based on new memory map
[12593.562760] [drm] Loading R300 Microcode
[12593.562764] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12593.608862] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12593.608867] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12625.259687] [drm] Setting GART location based on new memory map
[12625.259924] [drm] Loading R300 Microcode
[12625.259929] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12625.304821] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12625.304826] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[13282.388538] [drm] Setting GART location based on new memory map
[13282.388773] [drm] Loading R300 Microcode
[13282.388777] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[13282.436889] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[13282.436894] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
** Loaded modules:
Module Size Used by
radeon 141952 0
drm 172512 1 radeon
ehci_hcd 33676 0
binfmt_misc 9260 1
reiserfs 208568 1
fuse 54656 1
coretemp 6656 0
w83627ehf 22944 0
hwmon_vid 3088 1 w83627ehf
loop 15964 0
firewire_sbp2 15392 0
joydev 10992 0
snd_hda_codec_realtek 250068 1
psmouse 42156 0
evdev 10448 4
serio_raw 5844 0
i2c_i801 10464 0
i2c_core 25424 2 drm,i2c_i801
rng_core 4872 0
iTCO_wdt 12160 0
snd_hda_intel 26680 1
snd_hda_codec 75168 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8120 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
wacom 20648 0
snd_pcm 78440 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
parport_pc 27080 0
parport 38224 1 parport_pc
snd_seq_midi 6976 0
snd_rawmidi 22992 1 snd_seq_midi
snd_seq_midi_event 7696 1 snd_seq_midi
asus_atk0110 7744 0
snd_seq 51312 2 snd_seq_midi,snd_seq_midi_event
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
processor 40112 0
button 6512 0
snd 63864 13
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1 snd
snd_page_alloc 9968 2 snd_hda_intel,snd_pcm
intel_agp 28752 0
ext3 122736 4
jbd 48072 1 ext3
mbcache 8804 1 ext3
ide_cd_mod 29032 0
cdrom 34360 1 ide_cd_mod
usbhid 37248 0
hid 41328 1 usbhid
sd_mod 33688 7
crc_t10dif 2096 1 sd_mod
piix 7256 0
ide_pci_generic 4964 0
ata_piix 25124 7
ide_core 104992 3 ide_cd_mod,piix,ide_pci_generic
ata_generic 5924 0
libata 175004 2 ata_piix,ata_generic
firewire_ohci 22340 0
atl1 30808 0
mii 5600 1 atl1
firewire_core 44916 2 firewire_sbp2,firewire_ohci
crc_itu_t 2720 1 firewire_core
scsi_mod 158464 3 firewire_sbp2,sd_mod,libata
uhci_hcd 22192 0
thermal 15952 0
fan 5224 0
thermal_sys 16496 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root
Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d7f00000-d7ffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d7e00000-d7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 8000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 8400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 8800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 9000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d7cffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d7d00000-d7dfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, ide-pci-generic, piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at a800 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d7dff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b800 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d7ec0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at d7ea0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
Kernel modules: atl1
04:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 0x3e50
[Radeon X600] [1002:3e50] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at d7fe0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d7fc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
04:00.1 Display controller [0380]: ATI Technologies Inc RV380 [Radeon X600]
(Secondary) [1002:3e70]
Subsystem: PC Partner Limited Device [174b:1501]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Region 0: Memory at d7ff0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (900, 'stable'), (500, 'testing'), (300, 'unstable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
ii linux-doc-2.6.30 2.6.30-3 Linux kernel specific documentatio
-- debconf-show failed
--- End Message ---
--- Begin Message ---
On Wed, 2009-07-22 at 03:14 +0200, Michal Suchanek wrote:
> 2009/7/22 Ben Hutchings <[email protected]>:
> > On Wed, 2009-07-22 at 01:04 +0200, Michal Suchanek wrote:
> >> Package: linux-image-2.6.30-1-amd64
> >> Version: 2.6.30-3
> >> Severity: normal
> >>
> >>
> >> There is no DRI with X radeon driver and it seems somewhat related to
> >> the log below.
> >
> > Did you install firmware-linux?
>
> No, I overlooked that among the numerous other firmware packages.
>
> How do I tell I should?
>
> It's not like linux or the radeon driver recomments that.
Sorry, but packages in main must not recommend packages in non-free.
Ben.
--
Ben Hutchings
Unix is many things to many people,
but it's never been everything to anybody.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
