Package: linux-2.6
Version: 2.6.30-3
Severity: important
The 2.6.30-1-parisc64-smp kernel fails to boot on my J5600 system.
The non-smp kernel does boot correctly and the oops also indicates
an smp problem.
Boot log from serial console attached.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: hppa (parisc64)
Kernel: Linux 2.6.30-1-parisc64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF64 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 4771840 mediaptr 0x1000
Segment 1 load 00618000 size 460792 mediaptr 0x48e000
Segment 2 load 0068c000 size 300800 mediaptr 0x4ff000
Loading ramdisk 8182144 bytes @ 3f821000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-parisc64-smp (Debian 2.6.30-3)
(wa...@debian.org) (gcc version 4.3.3 (GCC) ) #1 SMP Sun Jul 19 10:34:15 UTC
2009
[ 0.000000] unwind_init: start = 0x404b9144, end = 0x404e5204, entries =
11276
[ 0.000000] WARNING: Out of order unwind entry! 00000000404bb0c4 and
00000000404bb0d4
[ 0.000000] WARNING: Out of order unwind entry! 00000000404bb0d4 and
00000000404bb0e4
[ 0.000000] FP[0] enabled: Rev 1 Model 16
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] console [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 00005d10 00000491 00000000 00000002 778fe5fc 100000f0
00000008 000000b2 000000b2
[ 0.000000] vers 00000300
[ 0.000000] CPUID vers 17 rev 10 (0x0000022a)
[ 0.000000] capabilities 0x3
[ 0.000000] model 9000/785/J5600
[ 0.000000] Total Memory: 2048 MB
[ 0.000000] initrd: 7f821000-7ffee980
[ 0.000000] initrd: reserving 3f821000-3ffee980 (mem_max 80000000)
[ 0.000000] LCD display at fffffff0f05d0008,fffffff0f05d0000 registered
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 517120
[ 0.000000] Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0
TERM=vt102 palo_kernel=2/vmlinux
[ 0.000000] NR_IRQS:128
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Console: colour dummy device 160x64
[ 0.064000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.168000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.520000] Memory: 2046464k/2097152k available (3144k kernel code, 50140k
reserved, 1467k data, 296k init)
[ 0.648000] virtual kernel memory layout:
[ 0.648000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[ 0.648000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB)
[ 0.648000] .init : 0x000000004068c000 - 0x00000000406d6000 ( 296 kB)
[ 0.648000] .data : 0x0000000040412078 - 0x0000000040581000 (1467 kB)
[ 0.648000] .text : 0x0000000040100000 - 0x0000000040412078 (3144 kB)
[ 1.172000] Calibrating delay loop... 1101.82 BogoMIPS (lpj=2203648)
[ 1.352000] Security Framework initialized
[ 1.404000] SELinux: Disabled at boot.
[ 1.456000] Mount-cache hash table entries: 256
[ 1.516000] Initializing cgroup subsys ns
[ 1.568000] Initializing cgroup subsys cpuacct
[ 1.628000] Initializing cgroup subsys devices
[ 1.684000] Initializing cgroup subsys freezer
[ 1.744000] Initializing cgroup subsys net_cls
[ 1.804000] Brought up 1 CPUs
[ 1.844000] net_namespace: 1928 bytes
[ 1.892000] regulator: core version 0.5
[ 1.944000] NET: Registered protocol family 16
[ 2.004000] EISA bus registered
[ 2.044000] Searching for devices...
[ 2.336000] Found devices:
[ 2.372000] 1. Astro BC Runway Port at 0xfffffffffed00000 [10] { 12, 0x0,
0x582, 0x0000b }
[ 2.480000] 2. Elroy PCI Bridge at 0xfffffffffed30000 [10/0] { 13, 0x0,
0x782, 0x0000a }
[ 2.588000] 3. Elroy PCI Bridge at 0xfffffffffed32000 [10/1] { 13, 0x0,
0x782, 0x0000a }
[ 2.692000] 4. Elroy PCI Bridge at 0xfffffffffed34000 [10/2] { 13, 0x0,
0x782, 0x0000a }
[ 2.800000] 5. Elroy PCI Bridge at 0xfffffffffed38000 [10/4] { 13, 0x0,
0x782, 0x0000a }
[ 2.908000] 6. Elroy PCI Bridge at 0xfffffffffed3c000 [10/6] { 13, 0x0,
0x782, 0x0000a }
[ 3.012000] 7. Forte W+ 2w at 0xfffffffffffa0000 [32] { 0, 0x0, 0x5d1,
0x00004 }
[ 3.112000] 8. Forte W+ 2w at 0xfffffffffffa2000 [34] { 0, 0x0, 0x5d1,
0x00004 }
[ 3.208000] 9. Memory at 0xfffffffffed10200 [49] { 1, 0x0, 0x09e, 0x00009 }
[ 3.300000] Enabling regular chassis codes support v0.05
[ 3.492000] Releasing cpu 1 now, hpa=fffffffffffa2000
[ 3.576000] FP[1] enabled: Rev 1 Model 16
[ 3.644000] CPU(s): 2 x PA8600 (PCX-W+) at 552.000000 MHz
[ 3.716000] Setting cache flush threshold to 100000 (2 CPUs online)
[ 3.840000] SBA found Astro 2.1 at 0xfffffffffed00000
[ 3.908000] Elroy version TR2.1 (0x2) found at 0xfffffffffed30000
[ 3.992000] PCI: Enabled native mode for NS87415 (pif=0x8f)
[ 4.068000] Elroy version TR2.1 (0x2) found at 0xfffffffffed32000
[ 4.152000] Elroy version TR2.1 (0x2) found at 0xfffffffffed34000
[ 4.232000] Elroy version TR2.1 (0x2) found at 0xfffffffffed38000
[ 4.312000] Elroy version TR2.1 (0x2) found at 0xfffffffffed3c000
[ 4.404000] powersw: Soft power switch at 0xfffffff0f0400804 enabled.
[ 4.492000] bio: create slab <bio-0> at 0
[ 4.564000] NET: Registered protocol family 2
[ 4.672000] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.768000] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 4.880000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 4.972000] TCP: Hash tables configured (established 262144 bind 65536)
[ 5.060000] TCP reno registered
[ 5.112000] NET: Registered protocol family 1
[ 5.168000] Trying to unpack rootfs image as initramfs...
[ 6.032000] Freeing initrd memory: 7990k freed
[ 6.096000] Enabling PDC chassis warnings support v0.05
[ 6.164000] Performance monitoring counters enabled for Forte W+ 2w
[ 6.248000] audit: initializing netlink socket (disabled)
[ 6.320000] type=2000 audit(1249019711.320:1): initialized
[ 6.392000] VFS: Disk quotas dquot_6.5.2
[ 6.444000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.528000] msgmni has been set to 4013
[ 6.580000] alg: No test for stdrng (krng)
[ 6.636000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 6.732000] io scheduler noop registered
[ 6.784000] io scheduler anticipatory registered
[ 6.844000] io scheduler deadline registered
[ 6.900000] io scheduler cfq registered (default)
[ 6.964000] SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 68)
[ 7.060000] SuperIO: Serial port 1 at 0x3f8
[ 7.112000] SuperIO: Serial port 2 at 0x2f8
[ 7.168000] SuperIO: Parallel port at 0x378
[ 7.224000] SuperIO: Floppy controller at 0x3f0
[ 7.284000] SuperIO: ACPI at 0x7e0
[ 7.328000] SuperIO: USB regulator enabled
[ 7.384000] PDC Stable Storage facility v0.30
[ 7.752000] STI GSC/PCI core graphics driver Version 0.9a
[ 7.840000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.924000] serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
[ 8.004000] console handover: boot [ttyB0] -> real [ttyS0]
[ 8.076000] serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
[ 8.160000] brd: module loaded
[ 8.196000] mice: PS/2 mouse device common for all mice
[ 8.260000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 8.348000] TCP cubic registered
[ 8.384000] NET: Registered protocol family 17
[ 8.440000] registered taskstats version 1
[ 8.492000] rtc-generic rtc-generic: setting system clock to 2009-07-31
05:55:14 UTC (1249019714)
[ 8.596000] Freeing unused kernel memory: <0>------------[ cut here
]------------
[ 8.688000] Badness at
/build/buildd/linux-2.6-2.6.30/debian/build/source_hppa_none/kernel/smp.c:369
[ 8.796000]
[ 8.816000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[ 8.872000] PSW: 00001000000001100000000000001110 Not tainted
[ 8.940000] r00-03 000000000806000e 0000000040686fa0 0000000040182c6c
000000004058d020
[ 9.036000] r04-07 0000000040668fa0 000000004065e7c0 00000000404f7db0
0000000000000000
[ 9.132000] r08-11 0000000040686fa0 000000004065e7c0 0000000000000000
00000000406797a0
[ 9.228000] r12-15 0000000000000001 0000000000000001 0000000000000000
0000000000000001
[ 9.324000] r16-19 00000000f00008c4 0000000040686fa0 00000000bf83eb40
00000000406d6000
[ 9.420000] r20-23 0000000000000000 00000000406d6000 ffffffffffffffff
0000000000000001
[ 9.516000] r24-27 0000000000000000 000000004065e7c0 00000000404f7db0
0000000040668fa0
[ 9.612000] r28-31 0000000000000000 00000000bf840490 00000000bf840580
0000000000000000
[ 9.708000] sr00-03 0000000000000000 0000000000000000 0000000000000000
0000000000000000
[ 9.804000] sr04-07 0000000000000000 0000000000000000 0000000000000000
0000000000000000
[ 9.900000]
[ 9.920000] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401829b4
00000000401829b8
[ 10.020000] IIR: 03ffe01f ISR: 0000000010240000 IOR: 0000000179de7d0c
[ 10.100000] CPU: 0 CR30: 00000000bf840000 CR31: 0000000011111111
[ 10.184000] ORIG_R28: 0000000040668fa0
[ 10.228000] IAOQ[0]: smp_call_function_many+0x7c/0x2f8
[ 10.292000] IAOQ[1]: smp_call_function_many+0x80/0x2f8
[ 10.356000] RP(r2): smp_call_function+0x3c/0x50
[ 10.408000] Backtrace:
[ 10.436000] Backtrace:
[ 10.436000] [<0000000040115fe8>] printk+0x40/0x50
[ 10.436000] [<0000000040152760>] print_tainted+0xc0/0xe0
[ 10.436000] [<0000000040104084>] intr_check_sig+0x0/0x38
[ 10.436000] [<0000000040104074>] intr_return+0x0/0x4
[ 10.436000] [<0000000040182c6c>] smp_call_function+0x3c/0x50
[ 10.436000] [<0000000040159d08>] on_each_cpu+0x28/0x68
[ 10.436000] [<000000004011b92c>] free_initmem+0x94/0x340
