Package: linux-image-2.6.30-1-686 Version: 2.6.30-5 Severity: normal Hi.
When plugging-in my openmoko freerunner with USB cable, I got : [ 450.988060] ------------[ cut here ]------------ [ 450.988076] WARNING: at /build/buildd-linux-2.6_2.6.30-5-i386-Lff5qC/linux-2.6-2.6.30/debian/build/source_i386_none/net/sched/sch_generic.c:226 dev_watchdog+0xa8/0x135() [ 450.988083] Hardware name: Latitude D820 [ 450.988089] NETDEV WATCHDOG: eth2 (cdc_ether): transmit timed out [ 450.988093] Modules linked in: cdc_ether usbnet mii nvidia(P) binfmt_misc ppdev lp bridge stp bnep rfcomm sco l2cap cpufreq_conservative cpufreq_powersave cpufreq_stats microcode fuse dm_crypt coretemp cpufreq_userspace acpi_cpufreq eeprom firewire_sbp2 loop snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss ecb snd_pcm snd_seq_midi joydev snd_rawmidi iwl3945 iwlcore snd_seq_midi_event pcmcia mac80211 snd_seq led_class snd_timer snd_seq_device i2c_i801 dell_laptop snd yenta_socket soundcore rsrc_nonstatic i2c_core cfg80211 rfkill snd_page_alloc rng_core usbhid btusb psmouse pcmcia_core hid dcdbas serio_raw bluetooth wmi evdev parport_pc battery parport button processor ac ext3 jbd mbcache dm_snapshot sd_mod crc_t10dif ide_pci_generic ide_core ata_generic uhci_hcd ata_piix libata ehci_hcd firewire_ohci firewire_core crc_itu_t scsi_mod tg3 usbcore libphy intel_agp agpgart video output thermal fan thermal_sys dm_mirror dm_region_hash dm_log dm_mod [ 450.988264] Pid: 0, comm: swapper Tainted: P 2.6.30-1-686 #1 [ 450.988268] Call Trace: [ 450.988279] [<c0127000>] ? warn_slowpath_common+0x5e/0x8a [ 450.988286] [<c029ede0>] ? dev_watchdog+0x0/0x135 [ 450.988293] [<c012705e>] ? warn_slowpath_fmt+0x26/0x2a [ 450.988300] [<c029ee88>] ? dev_watchdog+0xa8/0x135 [ 450.988307] [<c0133d77>] ? insert_work+0x71/0x78 [ 450.988314] [<c013438f>] ? delayed_work_timer_fn+0x0/0x28 [ 450.988322] [<c012e3b7>] ? run_timer_softirq+0x13d/0x19d [ 450.988328] [<c029ede0>] ? dev_watchdog+0x0/0x135 [ 450.988337] [<c012b0ff>] ? __do_softirq+0x8e/0x135 [ 450.988344] [<c012b1d4>] ? do_softirq+0x2e/0x38 [ 450.988351] [<c012b2b7>] ? irq_exit+0x26/0x53 [ 450.988358] [<c01105ca>] ? smp_apic_timer_interrupt+0x6c/0x76 [ 450.988366] [<c0103966>] ? apic_timer_interrupt+0x2a/0x30 [ 450.988390] [<f871b2be>] ? acpi_idle_enter_simple+0x106/0x140 [processor] [ 450.988407] [<f871b003>] ? acpi_idle_enter_bm+0xcc/0x281 [processor] [ 450.988416] [<c027e741>] ? cpuidle_idle_call+0x5d/0x90 [ 450.988423] [<c0102399>] ? cpu_idle+0x46/0x61 [ 450.988428] ---[ end trace 10a75ebb6c51b1bf ]--- There doesn't seem to be a working USB ethernet interface setup. Hope this helps. -- Package-specific info: ** Version: Linux version 2.6.30-1-686 (Debian 2.6.30-5) (m...@debian.org) (gcc version 4.3.3 (Debian 4.3.3-15) ) #1 SMP Mon Aug 3 16:18:30 UTC 2009 ** Command line: root=/dev/sda5 ro pci=assign-busses vga=791 ** Tainted: P W (513) ** Kernel log: [ 15.889871] EXT3-fs: mounted filesystem with ordered data mode. [ 15.949440] kjournald starting. Commit interval 5 seconds [ 15.962934] EXT3 FS on dm-6, internal journal [ 15.976135] EXT3-fs: mounted filesystem with ordered data mode. [ 20.035390] kjournald starting. Commit interval 5 seconds [ 20.048972] EXT3 FS on dm-5, internal journal [ 20.062373] EXT3-fs: mounted filesystem with ordered data mode. [ 25.028743] platform microcode: firmware: requesting intel-ucode/06-0f-02 [ 25.120308] platform microcode: firmware: requesting intel-ucode/06-0f-02 [ 25.143556] Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 26.112286] apm: BIOS not found. [ 54.597539] Bluetooth: L2CAP ver 2.13 [ 54.610940] Bluetooth: L2CAP socket layer initialized [ 54.749022] Bluetooth: SCO (Voice Link) ver 0.6 [ 54.762199] Bluetooth: SCO socket layer initialized [ 54.824268] Bluetooth: RFCOMM socket layer initialized [ 54.837347] Bluetooth: RFCOMM TTY layer initialized [ 54.849680] Bluetooth: RFCOMM ver 1.11 [ 54.897838] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.897842] Bluetooth: BNEP filters: protocol multicast [ 55.014872] Bridge firewalling registered [ 57.128960] lp0: using parport0 (interrupt-driven). [ 57.253131] ppdev: user-space parallel port driver [ 59.788906] tg3 0000:04:00.0: wake-up capability disabled by ACPI [ 59.788920] tg3 0000:04:00.0: PME# disabled [ 59.789123] tg3 0000:04:00.0: irq 30 for MSI/MSI-X [ 59.885498] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 59.886603] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 59.972947] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 60.019085] Registered led device: iwl-phy0::radio [ 60.019161] Registered led device: iwl-phy0::assoc [ 60.019192] Registered led device: iwl-phy0::RX [ 60.019224] Registered led device: iwl-phy0::TX [ 60.041275] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 61.490690] tg3: eth1: Link is up at 100 Mbps, full duplex. [ 61.490698] tg3: eth1: Flow control is on for TX and on for RX. [ 61.491061] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 62.499177] nvidia: module license 'NVIDIA' taints kernel. [ 62.499186] Disabling lock debugging due to kernel taint [ 62.756705] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 62.756721] nvidia 0000:01:00.0: setting latency timer to 64 [ 62.756921] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 Wed May 27 02:23:13 PDT 2009 [ 62.797848] wlan0: authenticate with AP 00:1f:9d:22:96:52 [ 62.802181] wlan0: authenticated [ 62.802187] wlan0: associate with AP 00:1f:9d:22:96:52 [ 63.000018] wlan0: associate with AP 00:1f:9d:22:96:52 [ 63.200048] wlan0: associate with AP 00:1f:9d:22:96:52 [ 63.400033] wlan0: association with AP 00:1f:9d:22:96:52 timed out [ 68.892069] CE: hpet increasing min_delta_ns to 15000 nsec [ 68.892164] CE: hpet increasing min_delta_ns to 22500 nsec [ 68.892257] CE: hpet increasing min_delta_ns to 33750 nsec [ 71.624014] eth1: no IPv6 routers present [ 295.385342] warning: `q-agent' uses 32-bit capabilities (legacy support in use) [ 319.516905] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 322.747143] wlan0: authenticate with AP 00:1f:9d:22:96:52 [ 322.750686] wlan0: authenticate with AP 00:1f:9d:22:96:51 [ 322.753140] wlan0: authenticate with AP 00:1f:9d:22:96:51 [ 322.753160] wlan0: authenticated [ 322.753164] wlan0: associate with AP 00:1f:9d:22:96:51 [ 322.760978] wlan0: RX AssocResp from 00:1f:9d:22:96:51 (capab=0x431 status=0 aid=1) [ 322.760983] wlan0: associated [ 322.762758] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 322.767353] cfg80211: Calling CRDA for country: FR [ 333.469056] wlan0: no IPv6 routers present [ 436.236206] usb 1-8.2.3: new full speed USB device using ehci_hcd and address 8 [ 436.331450] usb 1-8.2.3: New USB device found, idVendor=1457, idProduct=5122 [ 436.331457] usb 1-8.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 436.331462] usb 1-8.2.3: Product: RNDIS/Ethernet Gadget [ 436.331466] usb 1-8.2.3: Manufacturer: Linux 2.6.29-rc3 with s3c2410_udc [ 436.331621] usb 1-8.2.3: configuration #1 chosen from 2 choices [ 436.445237] eth0: register 'cdc_ether' at usb-0000:00:1d.7-8.2.3, CDC Ethernet Device, 00:1f:11:01:0c:5b [ 436.445278] usbcore: registered new interface driver cdc_ether [ 436.458728] udev: renamed network interface eth0 to eth2 [ 450.844059] eth2: no IPv6 routers present [ 450.988060] ------------[ cut here ]------------ [ 450.988076] WARNING: at /build/buildd-linux-2.6_2.6.30-5-i386-Lff5qC/linux-2.6-2.6.30/debian/build/source_i386_none/net/sched/sch_generic.c:226 dev_watchdog+0xa8/0x135() [ 450.988083] Hardware name: Latitude D820 [ 450.988089] NETDEV WATCHDOG: eth2 (cdc_ether): transmit timed out [ 450.988093] Modules linked in: cdc_ether usbnet mii nvidia(P) binfmt_misc ppdev lp bridge stp bnep rfcomm sco l2cap cpufreq_conservative cpufreq_powersave cpufreq_stats microcode fuse dm_crypt coretemp cpufreq_userspace acpi_cpufreq eeprom firewire_sbp2 loop snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss ecb snd_pcm snd_seq_midi joydev snd_rawmidi iwl3945 iwlcore snd_seq_midi_event pcmcia mac80211 snd_seq led_class snd_timer snd_seq_device i2c_i801 dell_laptop snd yenta_socket soundcore rsrc_nonstatic i2c_core cfg80211 rfkill snd_page_alloc rng_core usbhid btusb psmouse pcmcia_core hid dcdbas serio_raw bluetooth wmi evdev parport_pc battery parport button processor ac ext3 jbd mbcache dm_snapshot sd_mod crc_t10dif ide_pci_generic ide_core ata_generic uhci_hcd ata_piix libata ehci_hcd firewire_ohci firewire_core crc_itu_t scsi_mod tg3 usbcore libphy intel_agp agpgart video output thermal fan thermal_sys dm_mirror dm_region_hash dm_log dm_mod [ 450.988264] Pid: 0, comm: swapper Tainted: P 2.6.30-1-686 #1 [ 450.988268] Call Trace: [ 450.988279] [<c0127000>] ? warn_slowpath_common+0x5e/0x8a [ 450.988286] [<c029ede0>] ? dev_watchdog+0x0/0x135 [ 450.988293] [<c012705e>] ? warn_slowpath_fmt+0x26/0x2a [ 450.988300] [<c029ee88>] ? dev_watchdog+0xa8/0x135 [ 450.988307] [<c0133d77>] ? insert_work+0x71/0x78 [ 450.988314] [<c013438f>] ? delayed_work_timer_fn+0x0/0x28 [ 450.988322] [<c012e3b7>] ? run_timer_softirq+0x13d/0x19d [ 450.988328] [<c029ede0>] ? dev_watchdog+0x0/0x135 [ 450.988337] [<c012b0ff>] ? __do_softirq+0x8e/0x135 [ 450.988344] [<c012b1d4>] ? do_softirq+0x2e/0x38 [ 450.988351] [<c012b2b7>] ? irq_exit+0x26/0x53 [ 450.988358] [<c01105ca>] ? smp_apic_timer_interrupt+0x6c/0x76 [ 450.988366] [<c0103966>] ? apic_timer_interrupt+0x2a/0x30 [ 450.988390] [<f871b2be>] ? acpi_idle_enter_simple+0x106/0x140 [processor] [ 450.988407] [<f871b003>] ? acpi_idle_enter_bm+0xcc/0x281 [processor] [ 450.988416] [<c027e741>] ? cpuidle_idle_call+0x5d/0x90 [ 450.988423] [<c0102399>] ? cpu_idle+0x46/0x61 [ 450.988428] ---[ end trace 10a75ebb6c51b1bf ]--- [ 700.960072] CE: hpet increasing min_delta_ns to 50624 nsec ** Loaded modules: Module Size Used by tcp_diag 1240 0 inet_diag 8132 5 tcp_diag cdc_ether 4432 0 usbnet 14932 1 cdc_ether mii 4664 1 usbnet nvidia 9532360 30 binfmt_misc 7120 1 ppdev 6348 0 lp 8012 0 bridge 39968 0 stp 2112 1 bridge bnep 10860 2 rfcomm 30368 7 sco 8832 2 l2cap 18120 16 bnep,rfcomm cpufreq_conservative 6256 0 cpufreq_powersave 1292 0 cpufreq_stats 3520 0 microcode 11588 0 fuse 47752 1 dm_crypt 11092 0 coretemp 5176 0 cpufreq_userspace 2768 0 acpi_cpufreq 7640 0 eeprom 4964 0 firewire_sbp2 12692 0 loop 13324 0 snd_hda_codec_idt 49836 1 snd_hda_intel 22192 3 snd_hda_codec 63580 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 6120 1 snd_hda_codec arc4 1560 2 snd_pcm_oss 32232 0 snd_mixer_oss 12368 1 snd_pcm_oss ecb 2368 2 snd_pcm 62420 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 5688 0 joydev 8576 0 snd_rawmidi 18596 1 snd_seq_midi iwl3945 61064 0 iwlcore 92264 1 iwl3945 snd_seq_midi_event 6212 1 snd_seq_midi pcmcia 24280 0 mac80211 142848 2 iwl3945,iwlcore snd_seq 42436 2 snd_seq_midi,snd_seq_midi_event led_class 3852 2 iwl3945,iwlcore snd_timer 17436 2 snd_pcm,snd_seq snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq i2c_i801 8564 0 dell_laptop 3164 0 snd 49060 17 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device yenta_socket 21168 1 soundcore 6184 1 snd rsrc_nonstatic 9664 1 yenta_socket i2c_core 20844 3 nvidia,eeprom,i2c_i801 cfg80211 55556 3 iwl3945,iwlcore,mac80211 rfkill 9668 5 iwlcore,dell_laptop snd_page_alloc 8180 2 snd_hda_intel,snd_pcm rng_core 3672 0 usbhid 31568 0 btusb 10276 2 psmouse 37528 0 pcmcia_core 31212 3 pcmcia,yenta_socket,rsrc_nonstatic hid 34528 1 usbhid dcdbas 6736 1 dell_laptop serio_raw 4560 0 bluetooth 47060 9 bnep,rfcomm,sco,l2cap,btusb wmi 6184 0 evdev 8028 14 parport_pc 22420 1 battery 6012 0 parport 31144 3 ppdev,lp,parport_pc button 5060 0 processor 34504 3 acpi_cpufreq ac 2960 0 ext3 107172 9 jbd 41036 1 ext3 mbcache 6924 1 ext3 dm_snapshot 21604 0 sd_mod 28748 6 crc_t10dif 1632 1 sd_mod ide_pci_generic 3632 0 ide_core 88100 1 ide_pci_generic ata_generic 4340 0 uhci_hcd 19132 0 ata_piix 20848 6 libata 150904 2 ata_generic,ata_piix ehci_hcd 29680 0 firewire_ohci 18952 0 firewire_core 37736 2 firewire_sbp2,firewire_ohci crc_itu_t 2148 1 firewire_core scsi_mod 131800 3 firewire_sbp2,sd_mod,libata tg3 91244 0 usbcore 126004 7 cdc_ether,usbnet,usbhid,btusb,uhci_hcd,ehci_hcd libphy 19552 1 tg3 intel_agp 22900 0 agpgart 30836 2 nvidia,intel_agp video 18044 0 output 2604 1 video thermal 12580 0 fan 4044 0 thermal_sys 13140 4 processor,video,thermal,fan dm_mirror 12580 0 dm_region_hash 10668 1 dm_mirror dm_log 8464 2 dm_mirror,dm_region_hash dm_mod 49992 28 dm_crypt,dm_snapshot,dm_mirror,dm_log ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Dell Device [1028:01cc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ed000000-efefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Device [1028:01cc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: ecf00000-ecffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: ece00000-ecefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: ecc00000-ecdfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01cc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: ecb00000-ecbfffff Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ee000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at ef000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1021] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at ecfff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Device [1028:01cc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at ecef0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 06:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at ecb00000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 54000000-57fff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:01cc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ecbff000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at ecbfe800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'testing-proposed-updates') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-1-686 depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.9-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-1-686 recommends: ii libc6-i686 2.9-23 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-1-686 suggests: ii grub 0.97-56 GRand Unified Bootloader (dummy pa ii grub-legacy [grub] 0.97-56 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.30 <none> (no description available) -- debconf-show failed -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org