[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC 2009
[    0.000000] Command line: root=/dev/mapper/xvii-root ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000df44d400 (usable)
[    0.000000]  BIOS-e820: 00000000df44f400 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x100000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 800000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdf44d max_arch_pfn = 0x100000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000df44d000
[    0.000000]  0000000000 - 00df400000 page 2M
[    0.000000]  00df400000 - 00df44d000 page 4k
[    0.000000] kernel direct mapping tables up to df44d000 @ 8000-e000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[    0.000000] RAMDISK: 3773f000 - 37fef9f4
[    0.000000] ACPI: RSDP 00000000000fb9c0 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000df451e00 00064 (v01 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: FACP 00000000df451c9c 000F4 (v04 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: DSDT 00000000df452400 06A2B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 00000000df460c00 00040
[    0.000000] ACPI: HPET 00000000df451f00 00038 (v01 DELL    M09     00000001 ASL  00000061)
[    0.000000] ACPI: ____ 00000000df460400 00030 (v01 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: APIC 00000000df452000 00068 (v01 DELL    M09     27D9020D ASL  00000047)
[    0.000000] ACPI: ASF! 00000000df451c00 0006A (v32 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: MCFG 00000000df451fc0 0003E (v16 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: TCPA 00000000df452300 00032 (v01                 00000000 ASL  00000000)
[    0.000000] ACPI: SSDT 00000000df450329 0066C (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [000000000000d000 - 0000000000014fff]
[    0.000000]   bootmap [0000000000015000 -  0000000000038fff] pages 24
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 00007dd8cc]    TEXT DATA BSS ==> [0000200000 - 00007dd8cc]
[    0.000000]   #3 [003773f000 - 0037fef9f4]          RAMDISK ==> [003773f000 - 0037fef9f4]
[    0.000000]   #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
[    0.000000]   #5 [00007de000 - 00007de1e8]              BRK ==> [00007de000 - 00007de1e8]
[    0.000000]   #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
[    0.000000]   #7 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
[    0.000000]  [ffffe20000000000-ffffe20003ffffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000df44d
[    0.000000]     0: 0x00100002 -> 0x00120000
[    0.000000] On node 0 totalpages: 1045478
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1609 pages reserved
[    0.000000]   DMA zone: 2330 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 896133 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129278 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000df44d000 - 00000000df450000
[    0.000000] PM: Registered nosave memory: 00000000df450000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
[    0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
[    0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[    0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe60000
[    0.000000] PM: Registered nosave memory: 00000000ffe60000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100002000
[    0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:18000000)
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages at ffff88002801f000, static data 76256 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027741
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mapper/xvii-root ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Experimental hierarchical RCU implementation.
[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:424
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2394.195 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.004000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.004000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.004000] Memory: 4041188k/4718592k available (2784k kernel code, 536680k absent, 140724k reserved, 1415k data, 560k init)
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.39 BogoMIPS (lpj=9576780)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004000] Mount-cache hash table entries: 256
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU 0/0x0 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] CPU0: Thermal monitoring enabled (TM2)
[    0.004000] using mwait in idle threads.
[    0.004669] ACPI: Core revision 20090320
[    0.016051] Setting APIC routing to flat
[    0.016394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056702] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4787.97 BogoMIPS (lpj=9575955)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU 1/0x1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.145323] CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.145343] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.148022] Brought up 2 CPUs
[    0.148024] Total of 2 processors activated (9576.36 BogoMIPS).
[    0.148087] CPU0 attaching sched-domain:
[    0.148090]  domain 0: span 0-1 level MC
[    0.148091]   groups: 0 1
[    0.148095] CPU1 attaching sched-domain:
[    0.148097]  domain 0: span 0-1 level MC
[    0.148098]   groups: 1 0
[    0.148153] net_namespace: 1936 bytes
[    0.148153] Booting paravirtualized kernel on bare hardware
[    0.148153] regulator: core version 0.5
[    0.148153] NET: Registered protocol family 16
[    0.148153] ACPI: bus type pci registered
[    0.148153] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.148153] PCI: MCFG area at f8000000 reserved in E820
[    0.152603] PCI: Using MMCONFIG at f8000000 - fbffffff
[    0.152605] PCI: Using configuration type 1 for base access
[    0.152617] bio: create slab <bio-0> at 0
[    0.152617] ACPI: EC: Look up EC in DSDT
[    0.152800] ACPI: BIOS _OSI(Linux) query ignored
[    0.212019] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.232030] ACPI: Interpreter enabled
[    0.232032] ACPI: (supports S0 S3 S4 S5)
[    0.232050] ACPI: Using IOAPIC for interrupt routing
[    0.344054] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[    0.344056] ACPI: EC: driver started in interrupt mode
[    0.346853] ACPI: No dock devices found.
[    0.346864] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.346891] DMAR: Forcing write-buffer flush capability
[    0.346891] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:01.0: PME# disabled
[    0.346891] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6fe0000-0xf6ffffff]
[    0.346891] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6fdb000-0xf6fdbfff]
[    0.346891] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[    0.346891] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:19.0: PME# disabled
[    0.346891] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[    0.346891] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[    0.346891] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[    0.346891] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[    0.346891] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:1a.7: PME# disabled
[    0.346891] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6fdc000-0xf6fdffff]
[    0.346891] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:1b.0: PME# disabled
[    0.346891] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:1c.0: PME# disabled
[    0.346891] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:1c.1: PME# disabled
[    0.346891] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.346891] pci 0000:00:1c.2: PME# disabled
[    0.348075] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[    0.348160] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[    0.348247] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[    0.348333] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[    0.348395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.348400] pci 0000:00:1d.7: PME# disabled
[    0.348636] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[    0.348643] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[    0.348650] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[    0.348657] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[    0.348664] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[    0.348671] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[    0.348715] pci 0000:00:1f.2: PME# supported from D3hot
[    0.348719] pci 0000:00:1f.2: PME# disabled
[    0.348756] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6fdaf00-0xf6fdafff]
[    0.348773] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[    0.348854] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[    0.348868] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[    0.348882] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
[    0.348890] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
[    0.348899] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.349002] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.349005] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
[    0.349009] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.349178] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff]
[    0.349293] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[    0.349304] pci 0000:0c:00.0: PME# disabled
[    0.349389] pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
[    0.349498] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.349520] pci 0000:03:01.0: supports D1 D2
[    0.349521] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349526] pci 0000:03:01.0: PME# disabled
[    0.349565] pci 0000:03:01.1: reg 10 32bit mmio: [0xf1eff800-0xf1efffff]
[    0.349621] pci 0000:03:01.1: supports D1 D2
[    0.349622] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349627] pci 0000:03:01.1: PME# disabled
[    0.349666] pci 0000:03:01.2: reg 10 32bit mmio: [0xf1eff700-0xf1eff7ff]
[    0.349718] pci 0000:03:01.2: supports D1 D2
[    0.349720] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349724] pci 0000:03:01.2: PME# disabled
[    0.349794] pci 0000:00:1e.0: transparent bridge
[    0.349801] pci 0000:00:1e.0: bridge 32bit mmio: [0xf1e00000-0xf1efffff]
[    0.349853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.350208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.350321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.350383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.350456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.350528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.360664] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
[    0.364127] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.364253] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[    0.364378] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.364504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.364632] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.364759] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.364873] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.364932] usbcore: registered new interface driver usbfs
[    0.364932] usbcore: registered new interface driver hub
[    0.364932] usbcore: registered new device driver usb
[    0.364932] PCI: Using ACPI for IRQ routing
[    0.376028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.376032] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.392004] pnp: PnP ACPI init
[    0.392011] ACPI: bus type pnp registered
[    0.475737] pnp: PnP ACPI: found 14 devices
[    0.475738] ACPI: ACPI bus type pnp unregistered
[    0.475747] system 00:05: ioport range 0xc80-0xcaf has been reserved
[    0.475750] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[    0.475756] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.475760] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[    0.475763] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.475768] system 00:0b: ioport range 0x900-0x92f has been reserved
[    0.475770] system 00:0b: ioport range 0x931-0x933 has been reserved
[    0.475772] system 00:0b: ioport range 0x935-0x97f has been reserved
[    0.475775] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[    0.475777] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[    0.475779] system 00:0b: ioport range 0x1008-0x100f has been reserved
[    0.475784] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[    0.475787] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[    0.475789] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[    0.475792] system 00:0c: ioport range 0x1060-0x107f has been reserved
[    0.475794] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[    0.475796] system 00:0c: ioport range 0x1100-0x111f has been reserved
[    0.475799] system 00:0c: ioport range 0x1010-0x102f has been reserved
[    0.475801] system 00:0c: ioport range 0x809-0x809 has been reserved
[    0.475806] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[    0.475808] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[    0.475811] system 00:0d: iomem range 0xc0000-0xd3fff has been reserved
[    0.475813] system 00:0d: iomem range 0xe0000-0xfffff has been reserved
[    0.475816] system 00:0d: iomem range 0x100000-0xdf44d3ff could not be reserved
[    0.475818] system 00:0d: iomem range 0xdf44d400-0xdfefffff could not be reserved
[    0.475821] system 00:0d: iomem range 0xdff00000-0xdfffffff has been reserved
[    0.475823] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[    0.475826] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[    0.475828] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.475831] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.475833] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.475836] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.475839] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[    0.475841] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[    0.475844] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[    0.475846] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.475848] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[    0.475851] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[    0.475853] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.480706] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.480709] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.480712] pci 0000:00:01.0:   MEM window: 0xf2000000-0xf6efffff
[    0.480715] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.480719] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[    0.480720] pci 0000:00:1c.0:   IO window: disabled
[    0.480725] pci 0000:00:1c.0:   MEM window: disabled
[    0.480729] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.480736] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[    0.480737] pci 0000:00:1c.1:   IO window: disabled
[    0.480743] pci 0000:00:1c.1:   MEM window: 0xf1f00000-0xf1ffffff
[    0.480747] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.480754] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[    0.480755] pci 0000:00:1c.2:   IO window: disabled
[    0.480760] pci 0000:00:1c.2:   MEM window: disabled
[    0.480764] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.480776] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[    0.480778] pci 0000:03:01.0:   IO window: 0x002000-0x0020ff
[    0.480782] pci 0000:03:01.0:   IO window: 0x002400-0x0024ff
[    0.480786] pci 0000:03:01.0:   PREFETCH window: 0x120000000-0x123ffffff
[    0.480791] pci 0000:03:01.0:   MEM window: 0x124000000-0x127ffffff
[    0.480795] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.480798] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.480803] pci 0000:00:1e.0:   MEM window: 0xf1e00000-0xf1efffff
[    0.480808] pci 0000:00:1e.0:   PREFETCH window: 0x00000120000000-0x00000123ffffff
[    0.480819]   alloc irq_desc for 16 on cpu 0 node 0
[    0.480821]   alloc kstat_irqs on cpu 0 node 0
[    0.480825] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.480828] pci 0000:00:01.0: setting latency timer to 64
[    0.480835] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.480839] pci 0000:00:1c.0: setting latency timer to 64
[    0.480848]   alloc irq_desc for 17 on cpu 0 node 0
[    0.480849]   alloc kstat_irqs on cpu 0 node 0
[    0.480852] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.480856] pci 0000:00:1c.1: setting latency timer to 64
[    0.480864]   alloc irq_desc for 18 on cpu 0 node 0
[    0.480865]   alloc kstat_irqs on cpu 0 node 0
[    0.480868] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.480872] pci 0000:00:1c.2: setting latency timer to 64
[    0.480879] pci 0000:00:1e.0: setting latency timer to 64
[    0.480887]   alloc irq_desc for 19 on cpu 0 node 0
[    0.480889]   alloc kstat_irqs on cpu 0 node 0
[    0.480891] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.480897] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.480899] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.480901] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.480903] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
[    0.480905] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.480907] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
[    0.480909] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.480911] pci_bus 0000:03: resource 1 mem: [0xf1e00000-0xf1efffff]
[    0.480913] pci_bus 0000:03: resource 2 pref mem [0x120000000-0x123ffffff]
[    0.480915] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.480917] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.480919] pci_bus 0000:04: resource 0 io:  [0x2000-0x20ff]
[    0.480920] pci_bus 0000:04: resource 1 io:  [0x2400-0x24ff]
[    0.480922] pci_bus 0000:04: resource 2 pref mem [0x120000000-0x123ffffff]
[    0.480924] pci_bus 0000:04: resource 3 mem: [0x124000000-0x127ffffff]
[    0.480970] NET: Registered protocol family 2
[    0.501354] Switched to high resolution mode on CPU 1
[    0.503991] Switched to high resolution mode on CPU 0
[    0.520134] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.521194] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.524798] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.525262] TCP: Hash tables configured (established 524288 bind 65536)
[    0.525264] TCP reno registered
[    0.536102] NET: Registered protocol family 1
[    0.536155] Trying to unpack rootfs image as initramfs...
[    0.718912] Freeing initrd memory: 8898k freed
[    0.723158] audit: initializing netlink socket (disabled)
[    0.723173] type=2000 audit(1252577714.721:1): initialized
[    0.723544] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.723644] VFS: Disk quotas dquot_6.5.2
[    0.723672] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.723720] msgmni has been set to 7910
[    0.723849] alg: No test for stdrng (krng)
[    0.723893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.723896] io scheduler noop registered
[    0.723897] io scheduler anticipatory registered
[    0.723899] io scheduler deadline registered
[    0.723915] io scheduler cfq registered (default)
[    0.724106] pci 0000:01:00.0: Boot video device
[    0.724243]   alloc irq_desc for 24 on cpu 0 node 0
[    0.724245]   alloc kstat_irqs on cpu 0 node 0
[    0.724254] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.724262] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.724448]   alloc irq_desc for 25 on cpu 0 node 0
[    0.724450]   alloc kstat_irqs on cpu 0 node 0
[    0.724458] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.724474] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.724682]   alloc irq_desc for 26 on cpu 0 node 0
[    0.724684]   alloc kstat_irqs on cpu 0 node 0
[    0.724692] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.724708] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.724916]   alloc irq_desc for 27 on cpu 0 node 0
[    0.724918]   alloc kstat_irqs on cpu 0 node 0
[    0.724926] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.724942] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.727551] Linux agpgart interface v0.103
[    0.727553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.727726] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.728280] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.729603] brd: module loaded
[    0.729657] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.729813] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.730152] i8042.c: Warning: Keylock active.
[    0.733890] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.733895] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.734077] mice: PS/2 mouse device common for all mice
[    0.734125] rtc_cmos 00:03: RTC can wake from S4
[    0.734180] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.734209] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.734236] cpuidle: using governor ladder
[    0.734238] cpuidle: using governor menu
[    0.734242] No iBFT detected.
[    0.734492] TCP cubic registered
[    0.734535] NET: Registered protocol family 10
[    0.734880] lo: Disabled Privacy Extensions
[    0.735100] Mobile IPv6
[    0.735102] NET: Registered protocol family 17
[    0.735216] registered taskstats version 1
[    0.735348] rtc_cmos 00:03: setting system clock to 2009-09-10 10:15:15 UTC (1252577715)
[    0.735399] Freeing unused kernel memory: 560k freed
[    0.735581] Write protecting the kernel read-only data: 3812k
[    0.736173] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.825021] thermal LNXTHERM:01: registered as thermal_zone0
[    0.825028] ACPI: Thermal Zone [THM] (39 C)
[    0.893699] acpi device:37: registered as cooling_device0
[    0.894395] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/device:35/input/input2
[    0.894401] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.895575] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[    0.895577] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    0.895783]   alloc irq_desc for 22 on cpu 0 node 0
[    0.895785]   alloc kstat_irqs on cpu 0 node 0
[    0.895792] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.895801] e1000e 0000:00:19.0: setting latency timer to 64
[    0.895917]   alloc irq_desc for 28 on cpu 0 node 0
[    0.895918]   alloc kstat_irqs on cpu 0 node 0
[    0.895929] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[    0.899336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.902552] uhci_hcd: USB Universal Host Controller Interface driver
[    0.915665] firewire_ohci 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.925009] SCSI subsystem initialized
[    0.973924] sdhci: Secure Digital Host Controller Interface driver
[    0.973926] sdhci: Copyright(c) Pierre Ossman
[    0.982752] libata version 3.00 loaded.
[    0.990864] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:97:5f:73
[    0.990867] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    0.990899] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[    0.991278] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.991327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.991331] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.991421] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.995341] ehci_hcd 0000:00:1a.7: debug port 1
[    0.995348] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.995369] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.999244] firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
[    0.999564] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
[    0.999580] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.001658] Registered led device: mmc0::
[    1.002680] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
[    1.008513] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.008538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.008540] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.008542] usb usb1: Product: EHCI Host Controller
[    1.008544] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[    1.008545] usb usb1: SerialNumber: 0000:00:1a.7
[    1.008609] usb usb1: configuration #1 chosen from 1 choice
[    1.008635] hub 1-0:1.0: USB hub found
[    1.008643] hub 1-0:1.0: 6 ports detected
[    1.008806]   alloc irq_desc for 20 on cpu 0 node 0
[    1.008808]   alloc kstat_irqs on cpu 0 node 0
[    1.008815] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.008824] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.008827] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.008869] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.008910] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[    1.008944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.008946] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.008948] usb usb2: Product: UHCI Host Controller
[    1.008949] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.008951] usb usb2: SerialNumber: 0000:00:1a.0
[    1.008990] usb usb2: configuration #1 chosen from 1 choice
[    1.009012] hub 2-0:1.0: USB hub found
[    1.009018] hub 2-0:1.0: 2 ports detected
[    1.009120] ahci 0000:00:1f.2: version 3.0
[    1.009129] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.009183]   alloc irq_desc for 29 on cpu 0 node 0
[    1.009184]   alloc kstat_irqs on cpu 0 node 0
[    1.009194] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[    1.009241] ahci: SSS flag set, parallel bus scan disabled
[    1.009276] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
[    1.009279] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
[    1.009284] ahci 0000:00:1f.2: setting latency timer to 64
[    1.017532] scsi0 : ahci
[    1.017883] scsi1 : ahci
[    1.018214] scsi2 : ahci
[    1.018599] scsi3 : ahci
[    1.018849] scsi4 : ahci
[    1.019111] scsi5 : ahci
[    1.019581] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 29
[    1.019585] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 29
[    1.019587] ata3: DUMMY
[    1.019588] ata4: DUMMY
[    1.019590] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 29
[    1.019594] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 29
[    1.019719] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.019746] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.019749] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.019812] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.023718] ehci_hcd 0000:00:1d.7: debug port 1
[    1.023724] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.023731] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.058069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.058092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.058094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058096] usb usb3: Product: EHCI Host Controller
[    1.058097] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[    1.058099] usb usb3: SerialNumber: 0000:00:1d.7
[    1.058156] usb usb3: configuration #1 chosen from 1 choice
[    1.058181] hub 3-0:1.0: USB hub found
[    1.058190] hub 3-0:1.0: 6 ports detected
[    1.058344]   alloc irq_desc for 21 on cpu 0 node 0
[    1.058346]   alloc kstat_irqs on cpu 0 node 0
[    1.058352] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.058361] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.058364] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.058411] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.058448] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[    1.058479] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.058481] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058483] usb usb4: Product: UHCI Host Controller
[    1.058485] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.058486] usb usb4: SerialNumber: 0000:00:1a.1
[    1.058519] usb usb4: configuration #1 chosen from 1 choice
[    1.058542] hub 4-0:1.0: USB hub found
[    1.058548] hub 4-0:1.0: 2 ports detected
[    1.058641] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.058647] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.058650] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.058691] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.058719] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[    1.058749] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.058751] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058753] usb usb5: Product: UHCI Host Controller
[    1.058755] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.058756] usb usb5: SerialNumber: 0000:00:1a.2
[    1.058790] usb usb5: configuration #1 chosen from 1 choice
[    1.058811] hub 5-0:1.0: USB hub found
[    1.058816] hub 5-0:1.0: 2 ports detected
[    1.058909] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.058915] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.058917] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.058955] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.058980] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[    1.059010] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.059012] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059013] usb usb6: Product: UHCI Host Controller
[    1.059015] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.059016] usb usb6: SerialNumber: 0000:00:1d.0
[    1.059050] usb usb6: configuration #1 chosen from 1 choice
[    1.059071] hub 6-0:1.0: USB hub found
[    1.059082] hub 6-0:1.0: 2 ports detected
[    1.059174] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.059180] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.059183] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.059221] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.059246] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[    1.059276] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.059278] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059280] usb usb7: Product: UHCI Host Controller
[    1.059281] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.059283] usb usb7: SerialNumber: 0000:00:1d.1
[    1.059316] usb usb7: configuration #1 chosen from 1 choice
[    1.059337] hub 7-0:1.0: USB hub found
[    1.059342] hub 7-0:1.0: 2 ports detected
[    1.059434] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.059440] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.059443] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.059482] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.059506] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.059535] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.059537] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059538] usb usb8: Product: UHCI Host Controller
[    1.059540] usb usb8: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.059541] usb usb8: SerialNumber: 0000:00:1d.2
[    1.059576] usb usb8: configuration #1 chosen from 1 choice
[    1.059601] hub 8-0:1.0: USB hub found
[    1.059606] hub 8-0:1.0: 2 ports detected
[    1.496067] firewire_core: created device fw0: GUID 384fc00023cea890, S400
[    1.501013] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.502606] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[    1.502609] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.504276] ata1.00: configured for UDMA/133
[    1.521090] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[    1.545008] usb 1-6: new high speed USB device using ehci_hcd and address 4
[    1.717720] usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8
[    1.717722] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.717724] usb 1-6: Product: Laptop_Integrated_Webcam_0.3M
[    1.717725] usb 1-6: Manufacturer: CN0TX5937248794R05C7
[    1.717770] usb 1-6: configuration #1 chosen from 1 choice
[    1.960006] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    2.137855] usb 2-1: New USB device found, idVendor=0a5c, idProduct=4500
[    2.137858] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.137859] usb 2-1: Product: BCM2046B1
[    2.137861] usb 2-1: Manufacturer: Broadcom
[    2.137900] usb 2-1: configuration #1 chosen from 1 choice
[    2.140883] hub 2-1:1.0: USB hub found
[    2.142860] hub 2-1:1.0: 3 ports detected
[    2.384006] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.408013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.422336] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D300, max UDMA/100, ATAPI AN
[    2.422348] ata2.00: applying bridge limits
[    2.436426] ata2.00: configured for UDMA/100
[    2.454115] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-U633A D300 PQ: 0 ANSI: 5
[    2.562633] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[    2.562636] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.562637] usb 5-1: Product: 5880
[    2.562639] usb 5-1: Manufacturer: Broadcom Corp
[    2.562640] usb 5-1: SerialNumber: 0123456789ABCD
[    2.562685] usb 5-1: configuration #0 chosen from 1 choice
[    2.562686] usb 5-1: config 0 descriptor??
[    2.649816] usb 2-1.1: new full speed USB device using uhci_hcd and address 3
[    2.771807] usb 2-1.1: New USB device found, idVendor=413c, idProduct=8157
[    2.771809] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.771869] usb 2-1.1: configuration #1 chosen from 1 choice
[    2.773019] ata5: SATA link down (SStatus 0 SControl 300)
[    2.849802] usb 2-1.2: new full speed USB device using uhci_hcd and address 4
[    2.974791] usb 2-1.2: New USB device found, idVendor=413c, idProduct=8158
[    2.974793] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.974857] usb 2-1.2: configuration #1 chosen from 1 choice
[    2.981189] usbcore: registered new interface driver hiddev
[    2.983982] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
[    2.984022] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[    2.988020] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
[    2.988058] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[    2.988068] usbcore: registered new interface driver usbhid
[    2.988069] usbhid: v2.6:USB HID core driver
[    3.108016] ata6: SATA link down (SStatus 0 SControl 300)
[    3.136423] Driver 'sd' needs updating - please use bus_type methods
[    3.136519] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    3.136531] sd 0:0:0:0: [sda] Write Protect is off
[    3.136533] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.136550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.136624]  sda: sda1 sda2
[    3.163847] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.165517] Driver 'sr' needs updating - please use bus_type methods
[    3.172424] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.172427] Uniform CD-ROM driver Revision: 3.20
[    3.172507] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.176455] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.176479] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.336065] device-mapper: uevent: version 1.0.3
[    3.336251] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    9.109464] PM: Starting manual resume from disk
[    9.232928] kjournald starting.  Commit interval 5 seconds
[    9.232933] EXT3-fs: mounted filesystem with ordered data mode.
[   11.145536] udev: starting version 141
[   11.516038] cfg80211: Using static regulatory domain info
[   11.516146] cfg80211: Regulatory domain: US
[   11.516246] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.516368] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   11.516473] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.516577] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.516684] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.516789] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.516894] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   11.517001] cfg80211: Calling CRDA for country: US
[   11.606391] ACPI: AC Adapter [AC] (on-line)
[   11.614291] ACPI: SSDT 00000000df450995 00281 (v01  PmRef   BspIst 00003000 INTL 20050624)
[   11.614925] ACPI: SSDT 00000000df450ded 005C6 (v01  PmRef   BspCst 00003001 INTL 20050624)
[   11.615584] Monitor-Mwait will be used to enter C-1 state
[   11.618560] Monitor-Mwait will be used to enter C-2 state
[   11.620953] Monitor-Mwait will be used to enter C-3 state
[   11.620958] Marking TSC unstable due to TSC halts in idle
[   11.621255] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   11.621674] processor ACPI_CPU:00: registered as cooling_device1
[   11.621778] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.622584] ACPI: SSDT 00000000df450c16 001D7 (v01  PmRef    ApIst 00003000 INTL 20050624)
[   11.623154] ACPI: SSDT 00000000df4513b3 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[   11.624967] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   11.625531] processor ACPI_CPU:01: registered as cooling_device2
[   11.625634] ACPI: Processor [CPU1] (supports 8 throttling states)
[   11.664713] ACPI: Battery Slot [BAT0] (battery present)
[   11.664903] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.668267] ACPI: Lid Switch [LID]
[   11.668420] ACPI: Battery Slot [BAT1] (battery absent)
[   11.671839] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   11.672080] ACPI: Power Button [PBTN]
[   11.672209] ACPI: WMI: Mapper loaded
[   11.672411] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[   11.672554] ACPI: Sleep Button [SBTN]
[   11.676996] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   11.688311] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0233]
[   11.694078] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   11.772195] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   11.772373] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.813355] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[   11.813466] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[   11.813569] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[   11.813696] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   11.813818] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1e00000 - 0xf1efffff
[   11.813940] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x120000000 - 0x123ffffff
[   11.819770] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   11.819892] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   11.820489] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.820623] iwlagn 0000:0c:00.0: setting latency timer to 64
[   11.820726] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[   11.842827] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   11.843019]   alloc irq_desc for 30 on cpu 0 node 0
[   11.843021]   alloc kstat_irqs on cpu 0 node 0
[   11.843041] iwlagn 0000:0c:00.0: irq 30 for MSI/MSI-X
[   11.882557] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   11.921018] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
[   11.921207] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
[   11.921371] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input11
[   11.921540] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input12
[   11.960634] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.022097] Linux video capture interface: v2.00
[   12.058299] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63f8)
[   12.072680] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
[   12.072862] usbcore: registered new interface driver uvcvideo
[   12.072963] USB Video Class driver (v0.1.0)
[   12.400374] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input14
[   12.417214] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input15
[   12.925112] usb 2-1.3: new full speed USB device using uhci_hcd and address 5
[   13.059111] usb 2-1.3: New USB device found, idVendor=413c, idProduct=8156
[   13.059224] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.059359] usb 2-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[   13.059463] usb 2-1.3: Manufacturer: Dell Computer Corp
[   13.059654] usb 2-1.3: configuration #1 chosen from 1 choice
[   13.169386] Bluetooth: Core ver 2.15
[   13.169561] NET: Registered protocol family 31
[   13.169663] Bluetooth: HCI device and connection manager initialized
[   13.169765] Bluetooth: HCI socket layer initialized
[   13.268911] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   13.269104] usbcore: registered new interface driver btusb
[   14.052843] EXT3 FS on dm-1, internal journal
[   14.897796] loop: module loaded
[   15.721789] Adding 9928696k swap on /dev/mapper/xvii-swap_1.  Priority:-1 extents:1 across:9928696k 
[   17.988305] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[   18.040131] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[   18.040691] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.001068] Clocksource tsc unstable (delta = -63270843 ns)
[   28.629734] Bluetooth: L2CAP ver 2.13
[   28.629855] Bluetooth: L2CAP socket layer initialized
[   28.650860] Bluetooth: RFCOMM socket layer initialized
[   28.650991] Bluetooth: RFCOMM TTY layer initialized
[   28.651107] Bluetooth: RFCOMM ver 1.11
[   29.158148] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.158267] Bluetooth: BNEP filters: protocol multicast
[   29.272612] Bridge firewalling registered
[   29.306769] Bluetooth: SCO (Voice Link) ver 0.6
[   29.306886] Bluetooth: SCO socket layer initialized
[   35.680967] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   35.814418] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[   35.995686] Registered led device: iwl-phy0::radio
[   35.995848] Registered led device: iwl-phy0::assoc
[   35.995991] Registered led device: iwl-phy0::RX
[   35.996156] Registered led device: iwl-phy0::TX
[   36.010077] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.947148] lp: driver loaded but no devices found
[   36.982610] ppdev: user-space parallel port driver
