[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC 2009
[    0.000000] Command line: root=/dev/mapper/xvii-root ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000df44d400 (usable)
[    0.000000]  BIOS-e820: 00000000df44f400 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x100000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 800000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdf44d max_arch_pfn = 0x100000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000df44d000
[    0.000000]  0000000000 - 00df400000 page 2M
[    0.000000]  00df400000 - 00df44d000 page 4k
[    0.000000] kernel direct mapping tables up to df44d000 @ 8000-e000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[    0.000000] RAMDISK: 3773f000 - 37fef9f4
[    0.000000] ACPI: RSDP 00000000000fb9c0 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000df451e00 00064 (v01 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: FACP 00000000df451c9c 000F4 (v04 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: DSDT 00000000df452400 06A2B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 00000000df460c00 00040
[    0.000000] ACPI: HPET 00000000df451f00 00038 (v01 DELL    M09     00000001 ASL  00000061)
[    0.000000] ACPI: ____ 00000000df460400 00030 (v01 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: APIC 00000000df452000 00068 (v01 DELL    M09     27D9020D ASL  00000047)
[    0.000000] ACPI: ASF! 00000000df451c00 0006A (v32 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: MCFG 00000000df451fc0 0003E (v16 DELL    M09     27D9020D ASL  00000061)
[    0.000000] ACPI: TCPA 00000000df452300 00032 (v01                 00000000 ASL  00000000)
[    0.000000] ACPI: SSDT 00000000df450329 0066C (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [000000000000d000 - 0000000000014fff]
[    0.000000]   bootmap [0000000000015000 -  0000000000038fff] pages 24
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 00007dd8cc]    TEXT DATA BSS ==> [0000200000 - 00007dd8cc]
[    0.000000]   #3 [003773f000 - 0037fef9f4]          RAMDISK ==> [003773f000 - 0037fef9f4]
[    0.000000]   #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
[    0.000000]   #5 [00007de000 - 00007de1e8]              BRK ==> [00007de000 - 00007de1e8]
[    0.000000]   #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
[    0.000000]   #7 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
[    0.000000]  [ffffe20000000000-ffffe20003ffffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000df44d
[    0.000000]     0: 0x00100002 -> 0x00120000
[    0.000000] On node 0 totalpages: 1045478
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1609 pages reserved
[    0.000000]   DMA zone: 2330 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 896133 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129278 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000df44d000 - 00000000df450000
[    0.000000] PM: Registered nosave memory: 00000000df450000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
[    0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
[    0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[    0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe60000
[    0.000000] PM: Registered nosave memory: 00000000ffe60000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100002000
[    0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:18000000)
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages at ffff88002801f000, static data 76256 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027741
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mapper/xvii-root ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Experimental hierarchical RCU implementation.
[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:424
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2394.217 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.004000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.004000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.004000] Memory: 4041188k/4718592k available (2784k kernel code, 536680k absent, 140724k reserved, 1415k data, 560k init)
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.43 BogoMIPS (lpj=9576868)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004000] Mount-cache hash table entries: 256
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU 0/0x0 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] CPU0: Thermal monitoring enabled (TM2)
[    0.004000] using mwait in idle threads.
[    0.004672] ACPI: Core revision 20090320
[    0.016051] Setting APIC routing to flat
[    0.016395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056683] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4787.90 BogoMIPS (lpj=9575806)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU 1/0x1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.145325] CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.145345] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.148022] Brought up 2 CPUs
[    0.148024] Total of 2 processors activated (9576.33 BogoMIPS).
[    0.148087] CPU0 attaching sched-domain:
[    0.148090]  domain 0: span 0-1 level MC
[    0.148091]   groups: 0 1
[    0.148095] CPU1 attaching sched-domain:
[    0.148097]  domain 0: span 0-1 level MC
[    0.148099]   groups: 1 0
[    0.148152] net_namespace: 1936 bytes
[    0.148152] Booting paravirtualized kernel on bare hardware
[    0.148152] regulator: core version 0.5
[    0.148152] NET: Registered protocol family 16
[    0.148152] ACPI: bus type pci registered
[    0.148152] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.148152] PCI: MCFG area at f8000000 reserved in E820
[    0.152605] PCI: Using MMCONFIG at f8000000 - fbffffff
[    0.152606] PCI: Using configuration type 1 for base access
[    0.152619] bio: create slab <bio-0> at 0
[    0.152619] ACPI: EC: Look up EC in DSDT
[    0.152799] ACPI: BIOS _OSI(Linux) query ignored
[    0.212018] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.228229] ACPI: Interpreter enabled
[    0.228229] ACPI: (supports S0 S3 S4 S5)
[    0.228229] ACPI: Using IOAPIC for interrupt routing
[    0.344057] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[    0.344059] ACPI: EC: driver started in interrupt mode
[    0.346836] ACPI: No dock devices found.
[    0.346846] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.346873] DMAR: Forcing write-buffer flush capability
[    0.346873] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.346873] pci 0000:00:01.0: PME# disabled
[    0.346873] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6fe0000-0xf6ffffff]
[    0.346873] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6fdb000-0xf6fdbfff]
[    0.346873] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[    0.346873] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.346873] pci 0000:00:19.0: PME# disabled
[    0.346873] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[    0.346873] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[    0.346873] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[    0.346873] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[    0.346873] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.346873] pci 0000:00:1a.7: PME# disabled
[    0.346873] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6fdc000-0xf6fdffff]
[    0.346873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.346873] pci 0000:00:1b.0: PME# disabled
[    0.346873] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.346873] pci 0000:00:1c.0: PME# disabled
[    0.346873] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.346873] pci 0000:00:1c.1: PME# disabled
[    0.348082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.348086] pci 0000:00:1c.2: PME# disabled
[    0.348159] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[    0.348245] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[    0.348330] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[    0.348417] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[    0.348479] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.348484] pci 0000:00:1d.7: PME# disabled
[    0.348720] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[    0.348727] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[    0.348734] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[    0.348741] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[    0.348748] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[    0.348755] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[    0.348798] pci 0000:00:1f.2: PME# supported from D3hot
[    0.348802] pci 0000:00:1f.2: PME# disabled
[    0.348839] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6fdaf00-0xf6fdafff]
[    0.348857] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[    0.348937] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[    0.348951] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[    0.348966] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
[    0.348974] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
[    0.348982] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.349086] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.349088] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
[    0.349092] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.349239] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff]
[    0.349350] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[    0.349357] pci 0000:0c:00.0: PME# disabled
[    0.349438] pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
[    0.349546] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.349568] pci 0000:03:01.0: supports D1 D2
[    0.349570] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349574] pci 0000:03:01.0: PME# disabled
[    0.349613] pci 0000:03:01.1: reg 10 32bit mmio: [0xf1eff800-0xf1efffff]
[    0.349667] pci 0000:03:01.1: supports D1 D2
[    0.349669] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349673] pci 0000:03:01.1: PME# disabled
[    0.349713] pci 0000:03:01.2: reg 10 32bit mmio: [0xf1eff600-0xf1eff6ff]
[    0.349767] pci 0000:03:01.2: supports D1 D2
[    0.349769] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349773] pci 0000:03:01.2: PME# disabled
[    0.349813] pci 0000:03:01.3: reg 10 32bit mmio: [0xf1eff700-0xf1eff7ff]
[    0.349867] pci 0000:03:01.3: supports D1 D2
[    0.349869] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349873] pci 0000:03:01.3: PME# disabled
[    0.349941] pci 0000:00:1e.0: transparent bridge
[    0.349948] pci 0000:00:1e.0: bridge 32bit mmio: [0xf1e00000-0xf1efffff]
[    0.350000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.350355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.350469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.350531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.350604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.350676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.364097] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
[    0.364225] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.364351] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[    0.364477] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.364603] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.364731] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.364859] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.364973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.365032] usbcore: registered new interface driver usbfs
[    0.365032] usbcore: registered new interface driver hub
[    0.365032] usbcore: registered new device driver usb
[    0.365032] PCI: Using ACPI for IRQ routing
[    0.372027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.372031] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.384004] pnp: PnP ACPI init
[    0.384011] ACPI: bus type pnp registered
[    0.468194] pnp: PnP ACPI: found 14 devices
[    0.468196] ACPI: ACPI bus type pnp unregistered
[    0.468206] system 00:05: ioport range 0xc80-0xcaf has been reserved
[    0.468209] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[    0.468215] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.468220] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[    0.468222] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.468227] system 00:0b: ioport range 0x900-0x92f has been reserved
[    0.468229] system 00:0b: ioport range 0x931-0x933 has been reserved
[    0.468231] system 00:0b: ioport range 0x935-0x97f has been reserved
[    0.468234] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[    0.468236] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[    0.468239] system 00:0b: ioport range 0x1008-0x100f has been reserved
[    0.468243] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[    0.468246] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[    0.468248] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[    0.468251] system 00:0c: ioport range 0x1060-0x107f has been reserved
[    0.468253] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[    0.468255] system 00:0c: ioport range 0x1100-0x111f has been reserved
[    0.468258] system 00:0c: ioport range 0x1010-0x102f has been reserved
[    0.468260] system 00:0c: ioport range 0x809-0x809 has been reserved
[    0.468265] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[    0.468267] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[    0.468270] system 00:0d: iomem range 0xc0000-0xd3fff has been reserved
[    0.468272] system 00:0d: iomem range 0xe0000-0xfffff has been reserved
[    0.468275] system 00:0d: iomem range 0x100000-0xdf44d3ff could not be reserved
[    0.468277] system 00:0d: iomem range 0xdf44d400-0xdfefffff could not be reserved
[    0.468280] system 00:0d: iomem range 0xdff00000-0xdfffffff has been reserved
[    0.468282] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[    0.468285] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[    0.468287] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.468290] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.468292] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.468295] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.468297] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[    0.468300] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[    0.468302] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[    0.468305] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.468307] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[    0.468310] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[    0.468312] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.473148] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.473150] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.473154] pci 0000:00:01.0:   MEM window: 0xf2000000-0xf6efffff
[    0.473156] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.473160] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[    0.473162] pci 0000:00:1c.0:   IO window: disabled
[    0.473167] pci 0000:00:1c.0:   MEM window: disabled
[    0.473171] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.473177] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[    0.473179] pci 0000:00:1c.1:   IO window: disabled
[    0.473184] pci 0000:00:1c.1:   MEM window: 0xf1f00000-0xf1ffffff
[    0.473188] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.473195] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[    0.473197] pci 0000:00:1c.2:   IO window: disabled
[    0.473202] pci 0000:00:1c.2:   MEM window: disabled
[    0.473206] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.473218] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[    0.473219] pci 0000:03:01.0:   IO window: 0x002000-0x0020ff
[    0.473224] pci 0000:03:01.0:   IO window: 0x002400-0x0024ff
[    0.473228] pci 0000:03:01.0:   PREFETCH window: 0x120000000-0x123ffffff
[    0.473232] pci 0000:03:01.0:   MEM window: 0x124000000-0x127ffffff
[    0.473237] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.473240] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.473245] pci 0000:00:1e.0:   MEM window: 0xf1e00000-0xf1efffff
[    0.473250] pci 0000:00:1e.0:   PREFETCH window: 0x00000120000000-0x00000123ffffff
[    0.473261]   alloc irq_desc for 16 on cpu 0 node 0
[    0.473262]   alloc kstat_irqs on cpu 0 node 0
[    0.473266] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.473269] pci 0000:00:01.0: setting latency timer to 64
[    0.473276] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.473281] pci 0000:00:1c.0: setting latency timer to 64
[    0.473289]   alloc irq_desc for 17 on cpu 0 node 0
[    0.473290]   alloc kstat_irqs on cpu 0 node 0
[    0.473293] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.473297] pci 0000:00:1c.1: setting latency timer to 64
[    0.473304]   alloc irq_desc for 18 on cpu 0 node 0
[    0.473306]   alloc kstat_irqs on cpu 0 node 0
[    0.473309] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.473313] pci 0000:00:1c.2: setting latency timer to 64
[    0.473320] pci 0000:00:1e.0: setting latency timer to 64
[    0.473328]   alloc irq_desc for 19 on cpu 0 node 0
[    0.473329]   alloc kstat_irqs on cpu 0 node 0
[    0.473332] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.473338] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.473340] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.473342] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.473344] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
[    0.473346] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.473348] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
[    0.473350] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.473352] pci_bus 0000:03: resource 1 mem: [0xf1e00000-0xf1efffff]
[    0.473354] pci_bus 0000:03: resource 2 pref mem [0x120000000-0x123ffffff]
[    0.473356] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.473358] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.473360] pci_bus 0000:04: resource 0 io:  [0x2000-0x20ff]
[    0.473362] pci_bus 0000:04: resource 1 io:  [0x2400-0x24ff]
[    0.473364] pci_bus 0000:04: resource 2 pref mem [0x120000000-0x123ffffff]
[    0.473365] pci_bus 0000:04: resource 3 mem: [0x124000000-0x127ffffff]
[    0.473412] NET: Registered protocol family 2
[    0.501353] Switched to high resolution mode on CPU 1
[    0.503988] Switched to high resolution mode on CPU 0
[    0.504123] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.505186] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.508786] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.509254] TCP: Hash tables configured (established 524288 bind 65536)
[    0.509257] TCP reno registered
[    0.520105] NET: Registered protocol family 1
[    0.520159] Trying to unpack rootfs image as initramfs...
[    0.702900] Freeing initrd memory: 8898k freed
[    0.707142] audit: initializing netlink socket (disabled)
[    0.707156] type=2000 audit(1252612162.705:1): initialized
[    0.707528] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.707629] VFS: Disk quotas dquot_6.5.2
[    0.707657] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.707704] msgmni has been set to 7910
[    0.707833] alg: No test for stdrng (krng)
[    0.707877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.707880] io scheduler noop registered
[    0.707882] io scheduler anticipatory registered
[    0.707883] io scheduler deadline registered
[    0.707899] io scheduler cfq registered (default)
[    0.708088] pci 0000:01:00.0: Boot video device
[    0.708229]   alloc irq_desc for 24 on cpu 0 node 0
[    0.708231]   alloc kstat_irqs on cpu 0 node 0
[    0.708240] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.708249] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.708435]   alloc irq_desc for 25 on cpu 0 node 0
[    0.708437]   alloc kstat_irqs on cpu 0 node 0
[    0.708444] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.708460] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.708668]   alloc irq_desc for 26 on cpu 0 node 0
[    0.708670]   alloc kstat_irqs on cpu 0 node 0
[    0.708678] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.708694] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.708902]   alloc irq_desc for 27 on cpu 0 node 0
[    0.708904]   alloc kstat_irqs on cpu 0 node 0
[    0.708912] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.708928] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.711532] Linux agpgart interface v0.103
[    0.711534] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.711705] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.712088] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.713532] brd: module loaded
[    0.713585] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.713733] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.714018] i8042.c: Warning: Keylock active.
[    0.717769] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.717773] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.717892] mice: PS/2 mouse device common for all mice
[    0.717944] rtc_cmos 00:03: RTC can wake from S4
[    0.717988] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.718018] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.718046] cpuidle: using governor ladder
[    0.718047] cpuidle: using governor menu
[    0.718051] No iBFT detected.
[    0.718307] TCP cubic registered
[    0.718350] NET: Registered protocol family 10
[    0.718696] lo: Disabled Privacy Extensions
[    0.718910] Mobile IPv6
[    0.718913] NET: Registered protocol family 17
[    0.719025] registered taskstats version 1
[    0.719170] rtc_cmos 00:03: setting system clock to 2009-09-10 19:49:23 UTC (1252612163)
[    0.719217] Freeing unused kernel memory: 560k freed
[    0.719390] Write protecting the kernel read-only data: 3812k
[    0.720517] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.806571] thermal LNXTHERM:01: registered as thermal_zone0
[    0.806579] ACPI: Thermal Zone [THM] (32 C)
[    0.880666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.880752]   alloc irq_desc for 22 on cpu 0 node 0
[    0.880756]   alloc kstat_irqs on cpu 0 node 0
[    0.880765] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.880795] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.880798] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.880884] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.884788] ehci_hcd 0000:00:1a.7: debug port 1
[    0.884794] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.884811] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.900015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.900038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.900040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.900043] usb usb1: Product: EHCI Host Controller
[    0.900044] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[    0.900046] usb usb1: SerialNumber: 0000:00:1a.7
[    0.900105] usb usb1: configuration #1 chosen from 1 choice
[    0.900129] hub 1-0:1.0: USB hub found
[    0.900136] hub 1-0:1.0: 6 ports detected
[    0.901798] SCSI subsystem initialized
[    0.924883] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[    0.924885] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    0.927479]   alloc irq_desc for 20 on cpu 0 node 0
[    0.927481]   alloc kstat_irqs on cpu 0 node 0
[    0.927489] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.927518] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.927521] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.927602] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.931501] ehci_hcd 0000:00:1d.7: debug port 1
[    0.931507] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.931526] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    0.939391] acpi device:37: registered as cooling_device0
[    0.940117] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/device:35/input/input2
[    0.940124] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.952187] libata version 3.00 loaded.
[    0.956644] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.956669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.956671] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.956674] usb usb2: Product: EHCI Host Controller
[    0.956675] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[    0.956677] usb usb2: SerialNumber: 0000:00:1d.7
[    0.956742] usb usb2: configuration #1 chosen from 1 choice
[    0.956767] hub 2-0:1.0: USB hub found
[    0.956775] hub 2-0:1.0: 6 ports detected
[    0.959091] uhci_hcd: USB Universal Host Controller Interface driver
[    0.959218] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.959227] e1000e 0000:00:19.0: setting latency timer to 64
[    0.959343]   alloc irq_desc for 28 on cpu 0 node 0
[    0.959345]   alloc kstat_irqs on cpu 0 node 0
[    0.959358] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[    0.982472] firewire_ohci 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.984023] ricoh-mmc: Ricoh MMC Controller disabling driver
[    0.984026] ricoh-mmc: Copyright(c) Philip Langdale
[    0.990725] sdhci: Secure Digital Host Controller Interface driver
[    0.990727] sdhci: Copyright(c) Pierre Ossman
[    1.058699] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:97:5f:73
[    1.058702] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.058729] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[    1.059166] ahci 0000:00:1f.2: version 3.0
[    1.059179] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.059234]   alloc irq_desc for 29 on cpu 0 node 0
[    1.059236]   alloc kstat_irqs on cpu 0 node 0
[    1.059247] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[    1.059292] ahci: SSS flag set, parallel bus scan disabled
[    1.059327] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
[    1.059330] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
[    1.059335] ahci 0000:00:1f.2: setting latency timer to 64
[    1.062552] firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
[    1.062781] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.3 [1180:0843] (rev 11)
[    1.062798] ricoh-mmc: Controller is now disabled.
[    1.062806] scsi0 : ahci
[    1.063020] scsi1 : ahci
[    1.063058] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
[    1.063070] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.065118] Registered led device: mmc0::
[    1.066136] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
[    1.066146] scsi2 : ahci
[    1.066501] scsi3 : ahci
[    1.066547] scsi4 : ahci
[    1.066589] scsi5 : ahci
[    1.067055] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 29
[    1.067059] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 29
[    1.067060] ata3: DUMMY
[    1.067061] ata4: DUMMY
[    1.067064] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 29
[    1.067067] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 29
[    1.067158] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.067166] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.067169] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.067237] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.067264] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[    1.067300] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.067302] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067304] usb usb3: Product: UHCI Host Controller
[    1.067306] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.067307] usb usb3: SerialNumber: 0000:00:1a.0
[    1.067347] usb usb3: configuration #1 chosen from 1 choice
[    1.067370] hub 3-0:1.0: USB hub found
[    1.067376] hub 3-0:1.0: 2 ports detected
[    1.067479]   alloc irq_desc for 21 on cpu 0 node 0
[    1.067480]   alloc kstat_irqs on cpu 0 node 0
[    1.067486] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.067491] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.067494] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.067531] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.067564] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[    1.067593] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.067595] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067596] usb usb4: Product: UHCI Host Controller
[    1.067598] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.067600] usb usb4: SerialNumber: 0000:00:1a.1
[    1.067632] usb usb4: configuration #1 chosen from 1 choice
[    1.067654] hub 4-0:1.0: USB hub found
[    1.067659] hub 4-0:1.0: 2 ports detected
[    1.067753] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.067759] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.067761] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.067800] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.067825] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[    1.067855] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.067857] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067859] usb usb5: Product: UHCI Host Controller
[    1.067860] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.067862] usb usb5: SerialNumber: 0000:00:1a.2
[    1.067895] usb usb5: configuration #1 chosen from 1 choice
[    1.067916] hub 5-0:1.0: USB hub found
[    1.067921] hub 5-0:1.0: 2 ports detected
[    1.068023] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.068029] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.068031] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.068070] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.068095] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[    1.068124] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.068126] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068127] usb usb6: Product: UHCI Host Controller
[    1.068129] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.068130] usb usb6: SerialNumber: 0000:00:1d.0
[    1.068164] usb usb6: configuration #1 chosen from 1 choice
[    1.068186] hub 6-0:1.0: USB hub found
[    1.068196] hub 6-0:1.0: 2 ports detected
[    1.068288] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.068293] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.068296] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.068333] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.068358] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[    1.068386] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.068388] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068390] usb usb7: Product: UHCI Host Controller
[    1.068392] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.068393] usb usb7: SerialNumber: 0000:00:1d.1
[    1.068427] usb usb7: configuration #1 chosen from 1 choice
[    1.068448] hub 7-0:1.0: USB hub found
[    1.068453] hub 7-0:1.0: 2 ports detected
[    1.068546] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.068552] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.068555] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.068598] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.068623] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.068653] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.068654] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068656] usb usb8: Product: UHCI Host Controller
[    1.068658] usb usb8: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[    1.068659] usb usb8: SerialNumber: 0000:00:1d.2
[    1.068692] usb usb8: configuration #1 chosen from 1 choice
[    1.068714] hub 8-0:1.0: USB hub found
[    1.068718] hub 8-0:1.0: 2 ports detected
[    1.444008] usb 1-6: new high speed USB device using ehci_hcd and address 4
[    1.548012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.549618] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[    1.549620] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.551281] ata1.00: configured for UDMA/133
[    1.560067] firewire_core: created device fw0: GUID 384fc00023cea890, S400
[    1.564093] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[    1.618656] usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8
[    1.618658] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.618660] usb 1-6: Product: Laptop_Integrated_Webcam_0.3M
[    1.618662] usb 1-6: Manufacturer: CN0TX5937248794R05C7
[    1.618708] usb 1-6: configuration #1 chosen from 1 choice
[    1.860006] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    2.037214] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
[    2.037217] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.037219] usb 3-1: Product: BCM2046B1
[    2.037220] usb 3-1: Manufacturer: Broadcom
[    2.037284] usb 3-1: configuration #1 chosen from 1 choice
[    2.040241] hub 3-1:1.0: USB hub found
[    2.042218] hub 3-1:1.0: 3 ports detected
[    2.285006] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.452013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.464738] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[    2.464740] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.464742] usb 5-1: Product: 5880
[    2.464743] usb 5-1: Manufacturer: Broadcom Corp
[    2.464744] usb 5-1: SerialNumber: 0123456789ABCD
[    2.464807] usb 5-1: configuration #0 chosen from 1 choice
[    2.464808] usb 5-1: config 0 descriptor??
[    2.466784] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D300, max UDMA/100, ATAPI AN
[    2.466797] ata2.00: applying bridge limits
[    2.480790] ata2.00: configured for UDMA/100
[    2.499040] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-U633A D300 PQ: 0 ANSI: 5
[    2.553170] usb 3-1.1: new full speed USB device using uhci_hcd and address 3
[    2.674159] usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157
[    2.674161] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.674208] usb 3-1.1: configuration #1 chosen from 1 choice
[    2.753153] usb 3-1.2: new full speed USB device using uhci_hcd and address 4
[    2.816016] ata5: SATA link down (SStatus 0 SControl 300)
[    2.878141] usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158
[    2.878143] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.878205] usb 3-1.2: configuration #1 chosen from 1 choice
[    2.884628] usbcore: registered new interface driver hiddev
[    2.887340] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3
[    2.887385] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[    2.890377] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input4
[    2.890416] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[    2.890427] usbcore: registered new interface driver usbhid
[    2.890429] usbhid: v2.6:USB HID core driver
[    3.152016] ata6: SATA link down (SStatus 0 SControl 300)
[    3.177525] Driver 'sd' needs updating - please use bus_type methods
[    3.177634] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    3.177646] sd 0:0:0:0: [sda] Write Protect is off
[    3.177648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.177664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.177740]  sda: sda1 sda2
[    3.205882] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.207747] Driver 'sr' needs updating - please use bus_type methods
[    3.214356] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.214360] Uniform CD-ROM driver Revision: 3.20
[    3.214441] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.220660] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.220685] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.359145] device-mapper: uevent: version 1.0.3
[    3.359341] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    9.132422] PM: Starting manual resume from disk
[    9.258255] kjournald starting.  Commit interval 5 seconds
[    9.258260] EXT3-fs: mounted filesystem with ordered data mode.
[   11.184550] udev: starting version 141
[   11.522983] ACPI: AC Adapter [AC] (on-line)
[   11.524065] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.525836] ACPI: Lid Switch [LID]
[   11.525991] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   11.526120] ACPI: Power Button [PBTN]
[   11.526258] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[   11.526382] ACPI: Sleep Button [SBTN]
[   11.552580] ACPI: SSDT 00000000df450995 00281 (v01  PmRef   BspIst 00003000 INTL 20050624)
[   11.553232] ACPI: SSDT 00000000df450ded 005C6 (v01  PmRef   BspCst 00003001 INTL 20050624)
[   11.554635] Monitor-Mwait will be used to enter C-1 state
[   11.554651] Monitor-Mwait will be used to enter C-2 state
[   11.554664] Monitor-Mwait will be used to enter C-3 state
[   11.554669] Marking TSC unstable due to TSC halts in idle
[   11.554821] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   11.555305] processor ACPI_CPU:00: registered as cooling_device1
[   11.555408] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.556096] ACPI: SSDT 00000000df450c16 001D7 (v01  PmRef    ApIst 00003000 INTL 20050624)
[   11.556687] ACPI: SSDT 00000000df4513b3 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[   11.558022] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   11.558534] processor ACPI_CPU:01: registered as cooling_device2
[   11.558638] ACPI: Processor [CPU1] (supports 8 throttling states)
[   11.574323] ACPI: Battery Slot [BAT0] (battery present)
[   11.574484] ACPI: Battery Slot [BAT1] (battery absent)
[   11.582166] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0233]
[   11.602488] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   11.661063] cfg80211: Using static regulatory domain info
[   11.661167] cfg80211: Regulatory domain: US
[   11.661264] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.661384] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   11.661487] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.661590] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.661693] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.661796] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   11.661920] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   11.662029] cfg80211: Calling CRDA for country: US
[   11.671044] ACPI: WMI: Mapper loaded
[   11.702689] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   11.708810] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[   11.708915] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[   11.709021] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[   11.709156] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   11.709278] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1e00000 - 0xf1efffff
[   11.709401] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x120000000 - 0x123ffffff
[   11.851630] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   11.851818] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.053401] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   12.053529] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   12.053726] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   12.053833] iwlagn 0000:0c:00.0: setting latency timer to 64
[   12.053867] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[   12.075678] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   12.075868]   alloc irq_desc for 30 on cpu 0 node 0
[   12.075870]   alloc kstat_irqs on cpu 0 node 0
[   12.075888] iwlagn 0000:0c:00.0: irq 30 for MSI/MSI-X
[   12.077259] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   12.124985] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
[   12.125177] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
[   12.125345] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input11
[   12.125509] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input12
[   12.135256] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.167979] Linux video capture interface: v2.00
[   12.220585] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63f8)
[   12.234891] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
[   12.235068] usbcore: registered new interface driver uvcvideo
[   12.235170] USB Video Class driver (v0.1.0)
[   12.347355] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input14
[   12.364112] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input15
[   12.854388] usb 3-1.3: new full speed USB device using uhci_hcd and address 5
[   12.978383] usb 3-1.3: New USB device found, idVendor=413c, idProduct=8156
[   12.978518] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.978638] usb 3-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[   12.978740] usb 3-1.3: Manufacturer: Dell Computer Corp
[   12.978920] usb 3-1.3: configuration #1 chosen from 1 choice
[   13.036579] Bluetooth: Core ver 2.15
[   13.036734] NET: Registered protocol family 31
[   13.036834] Bluetooth: HCI device and connection manager initialized
[   13.036930] Bluetooth: HCI socket layer initialized
[   13.169427] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   13.169637] usbcore: registered new interface driver btusb
[   14.103144] EXT3 FS on dm-1, internal journal
[   14.923094] loop: module loaded
[   15.722384] Adding 9928696k swap on /dev/mapper/xvii-swap_1.  Priority:-1 extents:1 across:9928696k 
[   18.228308] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[   18.284127] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[   18.284689] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.826324] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   19.866245] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[   20.035725] Registered led device: iwl-phy0::radio
[   20.035841] Registered led device: iwl-phy0::assoc
[   20.035950] Registered led device: iwl-phy0::RX
[   20.036081] Registered led device: iwl-phy0::TX
[   20.049304] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   93.001246] Clocksource tsc unstable (delta = -261905029 ns)
[   98.964235] Bluetooth: L2CAP ver 2.13
[   98.964356] Bluetooth: L2CAP socket layer initialized
[   99.024283] Bluetooth: RFCOMM socket layer initialized
[   99.024431] Bluetooth: RFCOMM TTY layer initialized
[   99.024542] Bluetooth: RFCOMM ver 1.11
[   99.568322] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   99.568440] Bluetooth: BNEP filters: protocol multicast
[   99.661364] Bridge firewalling registered
[   99.714478] Bluetooth: SCO (Voice Link) ver 0.6
[   99.714600] Bluetooth: SCO socket layer initialized
[  166.615706] lp: driver loaded but no devices found
[  166.643590] ppdev: user-space parallel port driver
