Package: linux-image-2.6.30-1-686 Version: 2.6.30-6 Severity: normal
I recently upgraded my kernel from 2.6.26-2-686 to 2.6.30-1-686 and my Edgeport 8 port adapter converter stopped working. The attached kernel log shows the problem: [ 5972.079534] usb 1-1.6: firmware: requesting edgeport/down.fw [ 5972.109562] Failed to load image "edgeport/down.fw" err -2 [ 5972.109574] usb 1-1.6: firmware: requesting edgeport/boot.fw [ 5972.147206] Failed to load image "edgeport/boot.fw" err -2 My kermrc files no longer work and kermit pauses for a while then gives me the following error when I attempt to SET LINE: (/home/nathan/uboot/) C-Kermit>SET LINE /dev/ttyUSB7 /dev/ttyUSB7 Sorry, can't open connection: /dev/ttyUSB7 Running locate down.fw and boot.fw yields nothing, but I guess that's okay since I still have 2.6.26-2-686 installed and it still seems to work. -- Package-specific info: ** Version: Linux version 2.6.30-1-686 (Debian 2.6.30-6) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009 ** Command line: root=/dev/mapper/whiskers-root ro quiet ** Not tainted ** Kernel log: [ 4036.907260] Failed to load image "edgeport/boot.fw" err -2 [ 4036.907434] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB3 [ 4036.907508] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB4 [ 4036.907575] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB5 [ 4036.907643] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB6 [ 4036.907713] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB7 [ 4036.907782] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB8 [ 4036.907927] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB9 [ 4036.908059] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB10 [ 4036.981698] usb 1-1.6: new full speed USB device using uhci_hcd and address 8 [ 4037.128110] usb 1-1.6: New USB device found, idVendor=1608, idProduct=0012 [ 4037.128117] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 4037.128123] usb 1-1.6: Product: Edgeport/416 [ 4037.128127] usb 1-1.6: Manufacturer: Inside Out Networks [ 4037.128131] usb 1-1.6: SerialNumber: V24652120-1 [ 4037.128336] usb 1-1.6: configuration #1 chosen from 1 choice [ 4037.138381] io_edgeport 1-1.6:1.0: Edgeport 8 port adapter converter detected [ 4037.144946] usb 1-1.6: Inside Out Networks Edgeport/416 detected [ 4037.179651] usb 1-1.6: firmware: requesting edgeport/down.fw [ 4037.395165] Failed to load image "edgeport/down.fw" err -2 [ 4037.395177] usb 1-1.6: firmware: requesting edgeport/boot.fw [ 4037.428517] Failed to load image "edgeport/boot.fw" err -2 [ 4037.428701] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB11 [ 4037.428776] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB12 [ 4037.428850] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB13 [ 4037.428920] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB14 [ 4037.428992] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB15 [ 4037.429064] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB16 [ 4037.429135] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB17 [ 4037.429207] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB18 [ 5968.784075] usb 1-1: USB disconnect, address 6 [ 5968.784081] usb 1-1.5: USB disconnect, address 7 [ 5968.785536] edgeport_8 ttyUSB3: Edgeport 8 port adapter converter now disconnected from ttyUSB3 [ 5968.785599] edgeport_8 ttyUSB4: Edgeport 8 port adapter converter now disconnected from ttyUSB4 [ 5968.785661] edgeport_8 ttyUSB5: Edgeport 8 port adapter converter now disconnected from ttyUSB5 [ 5968.785720] edgeport_8 ttyUSB6: Edgeport 8 port adapter converter now disconnected from ttyUSB6 [ 5968.785777] edgeport_8 ttyUSB7: Edgeport 8 port adapter converter now disconnected from ttyUSB7 [ 5968.785836] edgeport_8 ttyUSB8: Edgeport 8 port adapter converter now disconnected from ttyUSB8 [ 5968.785897] edgeport_8 ttyUSB9: Edgeport 8 port adapter converter now disconnected from ttyUSB9 [ 5968.785955] edgeport_8 ttyUSB10: Edgeport 8 port adapter converter now disconnected from ttyUSB10 [ 5968.785979] io_edgeport 1-1.5:1.0: device disconnected [ 5968.786167] usb 1-1.6: USB disconnect, address 8 [ 5968.786393] edgeport_8 ttyUSB11: Edgeport 8 port adapter converter now disconnected from ttyUSB11 [ 5968.786456] edgeport_8 ttyUSB12: Edgeport 8 port adapter converter now disconnected from ttyUSB12 [ 5968.786518] edgeport_8 ttyUSB13: Edgeport 8 port adapter converter now disconnected from ttyUSB13 [ 5968.786583] edgeport_8 ttyUSB14: Edgeport 8 port adapter converter now disconnected from ttyUSB14 [ 5968.786645] edgeport_8 ttyUSB15: Edgeport 8 port adapter converter now disconnected from ttyUSB15 [ 5968.786706] edgeport_8 ttyUSB16: Edgeport 8 port adapter converter now disconnected from ttyUSB16 [ 5968.786769] edgeport_8 ttyUSB17: Edgeport 8 port adapter converter now disconnected from ttyUSB17 [ 5968.786828] edgeport_8 ttyUSB18: Edgeport 8 port adapter converter now disconnected from ttyUSB18 [ 5968.786851] io_edgeport 1-1.6:1.0: device disconnected [ 5971.008033] usb 1-1: new full speed USB device using uhci_hcd and address 9 [ 5971.173737] usb 1-1: New USB device found, idVendor=0451, idProduct=2077 [ 5971.173744] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5971.173749] usb 1-1: Product: General Purpose USB Hub [ 5971.173924] usb 1-1: configuration #1 chosen from 1 choice [ 5971.184813] hub 1-1:1.0: USB hub found [ 5971.186194] hub 1-1:1.0: 7 ports detected [ 5971.475153] usb 1-1.5: new full speed USB device using uhci_hcd and address 10 [ 5971.617641] usb 1-1.5: New USB device found, idVendor=1608, idProduct=0012 [ 5971.617648] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 5971.617654] usb 1-1.5: Product: Edgeport/416 [ 5971.617658] usb 1-1.5: Manufacturer: Inside Out Networks [ 5971.617662] usb 1-1.5: SerialNumber: V24652120-0 [ 5971.617854] usb 1-1.5: configuration #1 chosen from 1 choice [ 5971.627703] io_edgeport 1-1.5:1.0: Edgeport 8 port adapter converter detected [ 5971.633651] usb 1-1.5: Inside Out Networks Edgeport/416 detected [ 5971.672684] usb 1-1.5: firmware: requesting edgeport/down.fw [ 5971.742029] Failed to load image "edgeport/down.fw" err -2 [ 5971.742040] usb 1-1.5: firmware: requesting edgeport/boot.fw [ 5971.808753] Failed to load image "edgeport/boot.fw" err -2 [ 5971.808915] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB3 [ 5971.808988] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB4 [ 5971.809059] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB5 [ 5971.809126] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB6 [ 5971.809193] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB7 [ 5971.809263] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB8 [ 5971.809332] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB9 [ 5971.809402] usb 1-1.5: Edgeport 8 port adapter converter now attached to ttyUSB10 [ 5971.885615] usb 1-1.6: new full speed USB device using uhci_hcd and address 11 [ 5972.029596] usb 1-1.6: New USB device found, idVendor=1608, idProduct=0012 [ 5972.029603] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 5972.029608] usb 1-1.6: Product: Edgeport/416 [ 5972.029612] usb 1-1.6: Manufacturer: Inside Out Networks [ 5972.029616] usb 1-1.6: SerialNumber: V24652120-1 [ 5972.029812] usb 1-1.6: configuration #1 chosen from 1 choice [ 5972.039624] io_edgeport 1-1.6:1.0: Edgeport 8 port adapter converter detected [ 5972.045603] usb 1-1.6: Inside Out Networks Edgeport/416 detected [ 5972.079534] usb 1-1.6: firmware: requesting edgeport/down.fw [ 5972.109562] Failed to load image "edgeport/down.fw" err -2 [ 5972.109574] usb 1-1.6: firmware: requesting edgeport/boot.fw [ 5972.147206] Failed to load image "edgeport/boot.fw" err -2 [ 5972.147396] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB11 [ 5972.147476] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB12 [ 5972.147552] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB13 [ 5972.147625] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB14 [ 5972.147698] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB15 [ 5972.147774] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB16 [ 5972.147848] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB17 [ 5972.147928] usb 1-1.6: Edgeport 8 port adapter converter now attached to ttyUSB18 ** Loaded modules: Module Size Used by vboxdrv 102480 0 i915 147544 2 drm 137920 3 i915 i2c_algo_bit 4860 1 i915 video 18044 1 i915 output 2604 1 video nls_utf8 1488 1 cifs 250028 2 nls_base 6416 2 nls_utf8,cifs nfs 221580 2 lockd 57972 1 nfs fscache 34440 1 nfs nfs_acl 2640 1 nfs auth_rpcgss 31416 1 nfs sunrpc 163772 15 nfs,lockd,nfs_acl,auth_rpcgss ppdev 6348 0 lp 8012 0 ext2 54120 1 fuse 47752 1 loop 13324 0 psmouse 37528 0 snd_intel8x0 26584 0 snd_ac97_codec 91264 1 snd_intel8x0 ac97_bus 1456 1 snd_ac97_codec serio_raw 4560 0 snd_pcm_oss 32232 0 snd_mixer_oss 12368 1 snd_pcm_oss snd_pcm 62420 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss pcspkr 2104 0 snd_timer 17436 1 snd_pcm snd 49060 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 6184 1 snd i2c_i801 8564 0 snd_page_alloc 8180 2 snd_intel8x0,snd_pcm rng_core 3672 0 i2c_core 20844 4 i915,drm,i2c_algo_bit,i2c_i801 shpchp 26648 0 pci_hotplug 24400 1 shpchp evdev 8028 5 mos7720 16392 0 io_edgeport 36040 0 parport_pc 22420 1 parport 31144 3 ppdev,lp,parport_pc pl2303 14736 0 processor 34504 0 button 5060 0 usbserial 27456 3 mos7720,io_edgeport,pl2303 intel_agp 22900 1 agpgart 30836 3 drm,intel_agp ext3 107172 5 jbd 41036 1 ext3 mbcache 6924 2 ext2,ext3 sd_mod 28748 0 crc_t10dif 1632 1 sd_mod usbhid 31568 0 hid 34528 1 usbhid dm_mirror 12580 0 dm_region_hash 10668 1 dm_mirror dm_log 8464 2 dm_mirror,dm_region_hash dm_snapshot 21604 0 dm_mod 49992 21 dm_mirror,dm_log,dm_snapshot ide_cd_mod 24484 0 cdrom 30316 1 ide_cd_mod ide_gd_mod 19852 3 usb_storage 48472 0 piix 5680 2 ide_pci_generic 3632 0 ide_core 88100 4 ide_cd_mod,ide_gd_mod,piix,ide_pci_generic ata_generic 4340 0 libata 150904 1 ata_generic 3c59x 35576 0 e100 27464 0 mii 4664 2 3c59x,e100 ehci_hcd 29680 0 uhci_hcd 19132 0 scsi_mod 131800 3 sd_mod,usb_storage,libata usbcore 126004 9 mos7720,io_edgeport,pl2303,usbserial,usbhid,usb_storage,ehci_hcd,uhci_hcd floppy 46220 0 thermal 12580 0 fan 4044 0 thermal_sys 13140 4 video,processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at ec00 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ff800000-ff8fffff Prefetchable memory behind bridge: 30000000-300fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 30100000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at d800 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: Intel Corporation SoundMax Intergrated Digital Audio [8086:e002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 01:01.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at cc00 [size=128] Region 1: Memory at ff8ffc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at 30000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x 01:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at c800 [size=128] Region 1: Memory at ff8ff800 (32-bit, non-prefetchable) [size=128] Expansion ROM at 30020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x 01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01) Subsystem: Intel Corporation Device [8086:303a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at ff8fe000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c400 [size=64] Capabilities: <access denied> Kernel driver in use: e100 Kernel modules: e100 -- System Information: Debian Release: 5.0.3 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-1-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-1-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-1-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v ii linux-doc-2.6.30 2.6.30-6 Linux kernel specific documentatio -- debconf information: linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk: shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686: linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686: linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686: linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/kimage-is-a-directory: linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
