Package: linux-2.6 Version: 2.6.32-5 Severity: normal I'm not able to use my USB DMB tuner which get the following error in dmesg
[ 427.984996] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state. [ 428.328052] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 428.328316] DVB: registering new adapter (Conexant DMB-TH Stick) [ 430.571246] DVB: Unable to find symbol lgs8gxx_attach() [ 430.571250] dvb-usb: no frontend was attached by 'Conexant DMB-TH Stick' [ 430.571689] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/input/input8 [ 430.571744] dvb-usb: schedule remote query interval to 100 msecs. [ 430.572027] dvb-usb: Conexant DMB-TH Stick successfully initialized and connected. [ 430.572049] usbcore: registered new interface driver dvb_usb_cxusb Please enable LGS8GXX Thanks -- Package-specific info: ** Version: Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=ddf616cc-0e18-47c9-8ab5-8515f6d55fc2 ro quiet ** Not tainted ** Kernel log: [22798.784599] groups: 0-1 (cpu_power = 2048) [22798.784604] CPU1 attaching sched-domain: [22798.784606] domain 0: span 0-1 level MC [22798.784608] groups: 1 0 [22798.784612] domain 1: span 0-1 level CPU [22798.784614] groups: 0-1 (cpu_power = 2048) [22798.988717] VFS: busy inodes on changed media or resized disk sr0 [22799.008702] VFS: busy inodes on changed media or resized disk sr0 [22800.894856] VFS: busy inodes on changed media or resized disk sr0 [22800.912845] VFS: busy inodes on changed media or resized disk sr0 [22800.930839] VFS: busy inodes on changed media or resized disk sr0 [22802.896956] VFS: busy inodes on changed media or resized disk sr0 [22802.914970] VFS: busy inodes on changed media or resized disk sr0 [22802.932936] VFS: busy inodes on changed media or resized disk sr0 [22804.898060] VFS: busy inodes on changed media or resized disk sr0 [22804.916047] VFS: busy inodes on changed media or resized disk sr0 [22804.952033] VFS: busy inodes on changed media or resized disk sr0 [22806.896165] VFS: busy inodes on changed media or resized disk sr0 [22806.914173] VFS: busy inodes on changed media or resized disk sr0 [22806.932142] VFS: busy inodes on changed media or resized disk sr0 [22808.898291] VFS: busy inodes on changed media or resized disk sr0 [22808.916259] VFS: busy inodes on changed media or resized disk sr0 [22808.952245] VFS: busy inodes on changed media or resized disk sr0 [22810.908733] VFS: busy inodes on changed media or resized disk sr0 [22823.383872] hub 1-0:1.0: over-current change on port 1 [22823.399997] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.403984] usb 1-4: clear tt 1 (0080) error -71 [22823.408372] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.412358] usb 1-4: clear tt 1 (0080) error -71 [22823.424000] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.427987] usb 1-4: clear tt 1 (0080) error -71 [22823.432375] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.436362] usb 1-4: clear tt 1 (0080) error -71 [22823.448007] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.451990] usb 1-4: clear tt 1 (0080) error -71 [22823.464009] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.467993] usb 1-4: clear tt 1 (0080) error -71 [22823.472382] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.476368] usb 1-4: clear tt 1 (0080) error -71 [22823.484008] hub 1-0:1.0: over-current change on port 2 [22823.488013] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.491997] usb 1-4: clear tt 1 (0080) error -71 [22823.496384] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.500372] usb 1-4: clear tt 1 (0080) error -71 [22823.512015] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.516000] usb 1-4: clear tt 1 (0080) error -71 [22823.520388] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.524375] usb 1-4: clear tt 1 (0080) error -71 [22823.536022] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.540010] usb 1-4: clear tt 1 (0080) error -71 [22823.544391] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.548379] usb 1-4: clear tt 1 (0080) error -71 [22823.560070] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.564015] usb 1-4: clear tt 1 (0080) error -71 [22823.568395] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.572383] usb 1-4: clear tt 1 (0080) error -71 [22823.584028] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.588018] hub 1-0:1.0: over-current change on port 3 [22823.588040] usb 1-4: clear tt 1 (0080) error -71 [22823.592400] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.596387] usb 1-4: clear tt 1 (0080) error -71 [22823.600400] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.604388] usb 1-4: clear tt 1 (0080) error -71 [22823.616036] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.620017] usb 1-4: clear tt 1 (0080) error -71 [22823.624404] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.628391] usb 1-4: clear tt 1 (0080) error -71 [22823.640034] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.644019] usb 1-4: clear tt 1 (0080) error -71 [22823.648407] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.652395] usb 1-4: clear tt 1 (0080) error -71 [22823.664037] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.668023] usb 1-4: clear tt 1 (0080) error -71 [22823.672412] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.676399] usb 1-4: clear tt 1 (0080) error -71 [22823.688039] /build/buildd-linux-2.6_2.6.32-5-amd64-9RvY2G/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-4.2/input0, status -71 [22823.692014] usb 1-4: USB disconnect, address 7 [22823.692027] usb 1-4.2: USB disconnect, address 8 [22823.692031] usb 1-4: clear tt 1 (0080) error -71 [22823.960014] usb 1-4: new high speed USB device using ehci_hcd and address 10 [22824.093336] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608 [22824.093339] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [22824.093341] usb 1-4: Product: USB2.0 Hub [22824.093422] usb 1-4: configuration #1 chosen from 1 choice [22824.093834] hub 1-4:1.0: USB hub found [22824.094085] hub 1-4:1.0: 4 ports detected [22824.095487] hub 1-0:1.0: over-current change on port 5 [22824.196015] hub 1-0:1.0: over-current change on port 6 [22824.372259] usb 1-4.2: new low speed USB device using ehci_hcd and address 11 [22824.468394] usb 1-4.2: New USB device found, idVendor=093a, idProduct=2510 [22824.468397] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [22824.468400] usb 1-4.2: Product: USB OPTICAL MOUSE [22824.468402] usb 1-4.2: Manufacturer: PIXART [22824.468491] usb 1-4.2: configuration #1 chosen from 1 choice [22824.472451] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input11 [22824.472544] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.7-4.2/input0 [23082.640483] scim-bridge[3300]: segfault at 10 ip 00007f49b56a01a6 sp 00007fff922fb458 error 4 in libscim-1.0.so.8.2.4[7f49b562f000+d7000] [62282.366611] scim-bridge[18631]: segfault at 10 ip 00007f3eb00de1a6 sp 00007fffbbc39fb8 error 4 in libscim-1.0.so.8.2.4[7f3eb006d000+d7000] [66575.981899] device eth0 entered promiscuous mode [72884.458021] device eth0 left promiscuous mode ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 0412 board_vendor: ASUSTeK Computer INC. board_name: P5QL-EM board_version: Rev X.0x ** Loaded modules: Module Size Used by vboxnetadp 4225 0 vboxnetflt 9978 0 vboxdrv 1710230 2 vboxnetadp,vboxnetflt ext4 285067 1 jbd2 66855 1 ext4 lgs8gl5 4298 0 dvb_usb_cxusb 50457 0 dib7000p 13369 1 dvb_usb_cxusb dibx000_common 2437 1 dib7000p dvb_usb 12276 1 dvb_usb_cxusb dib0070 6413 1 dvb_usb_cxusb nls_utf8 1208 1 isofs 27480 1 udf 66612 0 i915 247359 3 drm_kms_helper 18883 1 i915 drm 137190 4 i915,drm_kms_helper i2c_algo_bit 4225 1 i915 video 17445 1 i915 output 1692 1 video binfmt_misc 6431 1 ppdev 5030 0 lp 7462 0 sco 7193 0 bridge 39582 0 stp 1440 1 bridge bnep 9395 0 rfcomm 29501 0 l2cap 24656 4 bnep,rfcomm crc16 1319 2 ext4,l2cap bluetooth 41795 4 sco,bnep,rfcomm,l2cap rfkill 12996 1 bluetooth dvb_ttpci 81346 0 dvb_core 76538 3 dib7000p,dvb_usb,dvb_ttpci saa7146_vv 37774 1 dvb_ttpci videodev 29977 1 saa7146_vv v4l1_compat 11442 1 videodev v4l2_compat_ioctl32 8538 1 videodev saa7146 11803 2 dvb_ttpci,saa7146_vv videobuf_dma_sg 8387 1 saa7146_vv videobuf_core 12196 2 saa7146_vv,videobuf_dma_sg ttpci_eeprom 1560 1 dvb_ttpci ipmi_devintf 6555 0 ibmaem 7733 0 ibmpex 5092 0 ipmi_msghandler 26506 3 ipmi_devintf,ibmaem,ibmpex battery 4998 0 acpi_cpufreq 5555 0 cpufreq_conservative 5162 0 cpufreq_powersave 902 0 cpufreq_stats 2659 0 cpufreq_userspace 1992 0 ipt_REJECT 1953 1 ipt_LOG 4518 1 xt_limit 1782 2 xt_tcpudp 2319 10 xt_state 1303 6 ipt_addrtype 1769 4 ip6table_filter 2384 1 ip6_tables 15075 1 ip6table_filter nf_nat_irc 1366 0 nf_conntrack_irc 3347 1 nf_nat_irc nf_nat_ftp 2031 0 nf_nat 13340 2 nf_nat_irc,nf_nat_ftp nf_conntrack_ipv4 9817 8 nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 nf_conntrack_ftp 5553 1 nf_nat_ftp nf_conntrack 46359 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 2258 1 ip_tables 13899 1 iptable_filter x_tables 12813 8 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_state,ipt_addrtype,ip6_tables,ip_tables fuse 50078 3 firewire_sbp2 11450 0 loop 11767 0 snd_hda_codec_intelhdmi 10695 1 snd_hda_codec_realtek 235095 1 snd_hda_intel 18147 5 snd_hda_codec 54212 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5364 1 snd_hda_codec snd_pcm_oss 32399 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60615 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4208 0 snd_rawmidi 15291 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42769 2 snd_seq_midi,snd_seq_midi_event processor 29479 1 acpi_cpufreq asus_atk0110 7686 0 pcspkr 1699 0 i2c_i801 7766 0 snd_timer 15502 2 snd_pcm,snd_seq snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 18839 1 evdev 7336 11 parport 27938 3 ppdev,lp,parport_pc i2c_core 15584 12 lgs8gl5,dib7000p,dibx000_common,dvb_usb,dib0070,i915,drm,i2c_algo_bit,dvb_ttpci,videodev,ttpci_eeprom,i2c_i801 snd 44718 21 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6217 2 snd_hda_intel,snd_pcm ext3 106454 3 jbd 37037 1 ext3 mbcache 4970 2 ext4,ext3 raid1 18175 4 md_mod 73616 5 raid1 sg 18728 0 sr_mod 12602 1 cdrom 29399 1 sr_mod sd_mod 29673 12 crc_t10dif 1276 1 sd_mod usbhid 31196 0 ahci 31494 0 ata_generic 2983 0 ide_pci_generic 2788 0 hid 62745 1 usbhid ide_core 76802 1 ide_pci_generic pata_marvell 2629 1 floppy 49087 0 intel_agp 25521 1 agpgart 24733 2 drm,intel_agp r8169 28765 0 mii 3210 1 r8169 firewire_ohci 19452 0 firewire_core 36560 2 firewire_sbp2,firewire_ohci crc_itu_t 1307 2 udf,firewire_core button 4634 1 i915 uhci_hcd 18457 0 ata_piix 19757 10 ehci_hcd 30578 0 libata 131655 4 ahci,ata_generic,pata_marvell,ata_piix scsi_mod 121909 5 firewire_sbp2,sg,sr_mod,sd_mod,libata usbcore 121687 6 dvb_usb_cxusb,dvb_usb,usbhid,uhci_hcd,ehci_hcd nls_base 6377 4 nls_utf8,isofs,udf,usbcore thermal 11674 0 fan 3346 0 thermal_sys 11878 4 video,processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8336] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8336] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at cc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8336] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe3fbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. Device [1043:82fe] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fe3f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f4000000-f43fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000f4400000-00000000f45fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe3fb800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Region 5: I/O ports at a080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe3fb400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: I/O ports at b080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:82c6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at d800 [size=256] Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K] Expansion ROM at fe9f0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82a2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell 03:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8313] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at febff400 (32-bit, non-prefetchable) [size=128] Region 4: Memory at febff000 (32-bit, non-prefetchable) [size=128] Region 5: Memory at febfec00 (32-bit, non-prefetchable) [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 011: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB [Hama] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'transitional'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_HK.UTF-8, LC_CTYPE=zh_HK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-trunk-amd64 depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.11-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-trunk-amd64 recommends: ii firmware-linux-free 2.6.32-5 Binary firmware for various driver Versions of packages linux-image-2.6.32-trunk-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-trunk-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64: * linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
