Package: linux-image-2.6-amd64 Version: 2.6.32+24 Severity: normal The Linux kernel on my AMD64 WLAN-AP/gateway machine spits the following warning to the syslog from time to time:
Feb 23 11:46:12 pneumantius kernel: [ 3008.768447] ------------[ cut here
]------------
Feb 23 11:46:12 pneumantius kernel: [ 3008.768489] WARNING: at
/build/buildd-linux-2.6_2.6.32-8-amd64-DCxXqz/linux-2.6-2.6.32/debian/build/source_amd64_none/net/mac80211/rx.c:2491
ieee80211_rx+0xdf/0x5ce [mac80211]()
Feb 23 11:46:12 pneumantius kernel: [ 3008.768497] Hardware name: GA-MA74GM-S2H
Feb 23 11:46:12 pneumantius kernel: [ 3008.768500] Modules linked in: ppdev lp
parport kvm_amd kvm cpufreq_stats cpufreq_conservative cpufreq_powersave
iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack
nf_defrag_ipv4 ip_tables x_tables fuse nfsd exportfs nfs lockd fscache nfs_acl
auth_rpcgss sunrpc bridge stp tun sit tunnel4 it87 hwmon_vid cpufreq_userspace
powernow_k8 loop snd_hda_codec_atihdmi snd_hda_intel arc4 snd_hda_codec
snd_hwdep snd_pcsp ecb snd_pcm ath9k mac80211 ath cfg80211 rfkill snd_timer
i2c_piix4 led_class serio_raw snd shpchp edac_core soundcore evdev k8temp
edac_mce_amd i2c_core snd_page_alloc pci_hotplug processor ext3 jbd mbcache
dm_mod raid1 md_mod sd_mod crc_t10dif ide_gd_mod ata_generic ohci_hcd
ide_pci_generic ahci atiixp libata ehci_hcd e100 r8169 mii button ide_core
scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded:
scsi_wait_scan]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768614] Pid: 0, comm: swapper Not
tainted 2.6.32-2-amd64 #1
Feb 23 11:46:12 pneumantius kernel: [ 3008.768619] Call Trace:
Feb 23 11:46:12 pneumantius kernel: [ 3008.768623] <IRQ> [<ffffffffa02dc8d5>]
? ieee80211_rx+0xdf/0x5ce [mac80211]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768658] [<ffffffffa02dc8d5>] ?
ieee80211_rx+0xdf/0x5ce [mac80211]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768669] [<ffffffff8104dbe8>] ?
warn_slowpath_common+0x77/0xa3
Feb 23 11:46:12 pneumantius kernel: [ 3008.768687] [<ffffffffa02dc8d5>] ?
ieee80211_rx+0xdf/0x5ce [mac80211]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768705] [<ffffffffa0313531>] ?
dma_map_single_attrs+0x83/0x92 [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768721] [<ffffffffa0313e4d>] ?
ath_rx_tasklet+0x7c2/0x81b [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768732] [<ffffffff812eeddd>] ?
_spin_unlock_irqrestore+0x8/0xe
Feb 23 11:46:12 pneumantius kernel: [ 3008.768747] [<ffffffffa03120c9>] ?
ath9k_tasklet+0x4a/0xb8 [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768756] [<ffffffff810522b6>] ?
tasklet_action+0x78/0xce
Feb 23 11:46:12 pneumantius kernel: [ 3008.768770] [<ffffffffa02feaa1>] ?
ath9k_hw_set_interrupts+0x1fc/0x286 [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768779] [<ffffffff8105397a>] ?
__do_softirq+0xdd/0x19f
Feb 23 11:46:12 pneumantius kernel: [ 3008.768793] [<ffffffffa031340a>] ?
ath_isr+0x139/0x14f [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768802] [<ffffffff81011cac>] ?
call_softirq+0x1c/0x30
Feb 23 11:46:12 pneumantius kernel: [ 3008.768809] [<ffffffff81013903>] ?
do_softirq+0x3f/0x7c
Feb 23 11:46:12 pneumantius kernel: [ 3008.768817] [<ffffffff810537e9>] ?
irq_exit+0x36/0x76
Feb 23 11:46:12 pneumantius kernel: [ 3008.768823] [<ffffffff81012ffa>] ?
do_IRQ+0xa0/0xb6
Feb 23 11:46:12 pneumantius kernel: [ 3008.768830] [<ffffffff810114d3>] ?
ret_from_intr+0x0/0x11
Feb 23 11:46:12 pneumantius kernel: [ 3008.768834] <EOI> [<ffffffff8102c568>]
? native_safe_halt+0x2/0x3
Feb 23 11:46:12 pneumantius kernel: [ 3008.768849] [<ffffffff81017cb5>] ?
default_idle+0x34/0x51
Feb 23 11:46:12 pneumantius kernel: [ 3008.768856] [<ffffffff81018041>] ?
c1e_idle+0xf5/0xfb
Feb 23 11:46:12 pneumantius kernel: [ 3008.768864] [<ffffffff8100fe90>] ?
cpu_idle+0xa2/0xda
Feb 23 11:46:12 pneumantius kernel: [ 3008.768872] [<ffffffff814d8140>] ?
early_idt_handler+0x0/0x71
Feb 23 11:46:12 pneumantius kernel: [ 3008.768880] [<ffffffff814d8cd7>] ?
start_kernel+0x3d0/0x3dc
Feb 23 11:46:12 pneumantius kernel: [ 3008.768887] [<ffffffff814d83b7>] ?
x86_64_start_kernel+0xf9/0x106
Feb 23 11:46:12 pneumantius kernel: [ 3008.768893] ---[ end trace
36bb7d5421f8fb5d ]---
The same warning already occurred with linux-image-2.6.32-trunk-amd64 if that
matters. I had no older kernel running on the same hardware and cannot tell
whether the warning happens there too. I experience no strange behaviour or
system crashes afterwards. I attach the output of dmidecode and lspci -vvv to
aid debugging.
Regards
Jan Dittberner
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (890, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-2-amd64 (SMP w/1 CPU core)
Locale: LANG=de, LC_CTYPE=de (charmap=UTF-8) (ignored: LC_ALL set to
de_DE.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6-amd64 depends on:
ii linux-image-2.6.32-2-amd64 2.6.32-8 Linux 2.6.32 for 64-bit PCs
linux-image-2.6-amd64 recommends no packages.
linux-image-2.6-amd64 suggests no packages.
-- no debconf information
--
Jan Dittberner - Debian Developer
GPG-key: 4096R/558FB8DD 2009-05-10
B2FF 1D95 CE8F 7A22 DF4C F09B A73E 0055 558F B8DD
http://ddportfolio.debian.net/ - http://people.debian.org/~jandd/
# dmidecode 2.9
SMBIOS 2.4 present.
46 structures occupying 2162 bytes.
Table at 0x000F0100.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Award Software International, Inc.
Version: FC
Release Date: 08/13/2009
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-MA74GM-S2H
Version:
Serial Number:
UUID: 30303234-3144-3544-4634-3641FFFFFFFF
Wake-up Type: Power Switch
SKU Number:
Family:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-MA74GM-S2H
Version: x.x
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Gigabyte Technology Co., Ltd.
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket M2
Type: Central Processor
Family: Athlon
Manufacturer: AMD
ID: F2 0F 04 00 FF FB 8B 07
Signature: Family 15, Model 79, Stepping 2
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: AMD Athlon(tm) 64 Processor 3500+
Voltage: 1.4 V
External Clock: 200 MHz
Max Speed: 3200 MHz
Current Speed: 2200 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x000A
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Standard
EDO
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities:
None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 1
Current Speed: 155 ns
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2
Current Speed: 155 ns
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Disabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 0 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator:
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: Other
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x001D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 7
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 6
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express x16
Type: x16 PCI Express
Current Usage: Unknown
Length: Other
ID: 0
Characteristics:
3.3 V is provided
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express x1
Type: x1 PCI Express
Current Usage: Unknown
Length: Other
ID: 0
Characteristics:
3.3 V is provided
Handle 0x0021, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0022, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0023, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0022
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: 667 MHz (1.5 ns)
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x0024, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0022
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: 667 MHz (1.5 ns)
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x0025, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0022
Partition Width: 32
Handle 0x0026, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0023
Memory Array Mapped Address Handle: 0x0025
Partition Row Position: 1
Handle 0x0027, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0024
Memory Array Mapped Address Handle: 0x0025
Partition Row Position: 1
Handle 0x0028, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0029, DMI type 188, 244 bytes
OEM-specific Type
Header and Data:
BC F4 29 00 00 00 00 80 00 00 00 00 00 00 00 00
00 00 00 00 01 06 16 00 00 00 00 00 03 00 00 00
00 00 7F 00 00 00 00 00 01 00 00 00 00 00 00 00
02 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
04 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00
06 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00
40 00 10 02 00 00 00 00 00 00 03 00 EF 02 00 5D
01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 3E 78 00 00 00 00 00 00 00 00 00 00 00 00 00
46 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
24 CA 69 5D 20 13 12 00 10 0C 01 00 6A 00 10 67
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x002A, DMI type 190, 212 bytes
OEM-specific Type
Header and Data:
BE D4 2A 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x002B, DMI type 192, 244 bytes
OEM-specific Type
Header and Data:
C0 F4 2B 00 17 16 17 17 16 16 17 17 17 00 00 00
17 17 17 17 17 17 17 16 17 00 00 00 2E 00 00 00
17 15 16 16 17 16 16 16 17 17 18 18 17 15 17 18
18 17 30 00 00 00 22 12 11 20 20 22 20 00 22 12
11 20 20 22 20 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x002C, DMI type 194, 244 bytes
OEM-specific Type
Header and Data:
C2 F4 2C 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x002D, DMI type 127, 4 bytes
End Of Table
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Giga-byte Technology Device 5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fdefffff
Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI
Bridge (Internal gfx)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express
Port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot # 6, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4151
Capabilities: [b0] Subsystem: Giga-byte Technology Device 5000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntrySize=0
Arb: Fixed- WRR32- WRR64- WRR128- 100ns- - - onfig-
TableOffset=0
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Fixed- RR32-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI
mode] (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
Subsystem: Giga-byte Technology Device 4385
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if
8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device 5002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fa00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ATIIXP_IDE
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: fdb00000-fdbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 2100 (prog-if 00
[VGA controller])
Subsystem: Giga-byte Technology Device d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f8000000 (64-bit, prefetchable) [size=64M]
Region 2: Memory at fdee0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at ee00 [size=256]
Region 5: Memory at fdd00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller
Subsystem: Giga-byte Technology Device 7919
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fdefc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: HDA Intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0100c Data: 4161
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntrySize=0
Arb: Fixed- WRR32- WRR64- WRR128- 100ns- - - onfig-
TableOffset=0
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Fixed- RR32-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 12-34-56-78-12-34-56-78
Kernel driver in use: r8169
03:06.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
(rev 0c)
Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fdcff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cf00 [size=64]
Region 2: Memory at fdcc0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
03:07.0 Network controller: Atheros Communications Inc. AR922X Wireless Network
Adapter (rev 01)
Subsystem: D-Link System Inc Device 3a78
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdce0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=100mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ath9k
signature.asc
Description: Digital signature
