Package: linux-2.6 Version: 2.6.32-11 Severity: normal Tags: upstream Some minutes after booting (cold boot, or resume from hibernation, at least before #534422 prevents me to use hibernation), my Iceweasel session launched through a SSH connection always fail with following error message : Corrupted MAC on input. Disconnecting: Packet corrupt Restarting the SSH connection, the problem don't occur anymore before next reboot. I've checked and replaced the ethernet cable, without change. I also tested the memory, seems ok. I thought at start it was a iceweasel or openssh problem, but then found other people have the same problem, like : https://bugs.launchpad.net/ubuntu/+source/linux/+bug/60764 https://bugzilla.kernel.org/show_bug.cgi?id=12282 and perhaps also https://bugzilla.kernel.org/show_bug.cgi?id=13404 The problem is here at least since 2.6.30, and is always present with latest kernel from Sid.
-- Package-specific info: ** Version: Linux version 2.6.32-4-686 (Debian 2.6.32-11) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr 6 07:02:27 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-686 root=UUID=e295254a-3f31-41d0-91b3-01c982751390 ro quiet init=/sbin/bootchartd ** Not tainted ** Kernel log: [ 20.698740] name_count maxed, losing inode data: dev=00:07, inode=3668 [ 20.698754] name_count maxed, losing inode data: dev=00:07, inode=3760 [ 20.698766] name_count maxed, losing inode data: dev=00:07, inode=3760 [ 20.702285] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6:1.0/input/input10 [ 20.702372] name_count maxed, losing inode data: dev=00:05, inode=802 [ 20.702402] name_count maxed, losing inode data: dev=00:05, inode=802 [ 20.702490] name_count maxed, losing inode data: dev=00:05, inode=802 [ 20.702508] name_count maxed, losing inode data: dev=00:05, inode=802 [ 20.702614] name_count maxed, losing inode data: dev=00:05, inode=4 [ 20.702632] name_count maxed, losing inode data: dev=00:05, inode=4 [ 20.702685] generic-usb 0003:047D:1020.0003: input,hidraw2: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:1d.7-4.6/input0 [ 20.702712] name_count maxed, losing inode data: dev=00:07, inode=3668 [ 20.702737] name_count maxed, losing inode data: dev=00:07, inode=3767 [ 20.702750] name_count maxed, losing inode data: dev=00:07, inode=3767 [ 20.702797] usbcore: registered new interface driver usbhid [ 20.702807] usbhid: v2.6:USB HID core driver [ 21.072045] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.072117] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 21.177858] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 22.180011] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000 [ 22.182130] name_count maxed, losing inode data: dev=00:05, inode=4127 [ 22.182241] name_count maxed, losing inode data: dev=00:05, inode=4 [ 22.182261] name_count maxed, losing inode data: dev=00:05, inode=4 [ 22.785849] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k [ 22.926683] EXT3 FS on sda8, internal journal [ 23.029031] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.030645] name_count maxed, losing inode data: dev=00:07, inode=8 [ 23.030661] name_count maxed, losing inode data: dev=00:07, inode=4569 [ 23.030710] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.030732] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.031225] name_count maxed, losing inode data: dev=00:07, inode=8 [ 23.031241] name_count maxed, losing inode data: dev=00:07, inode=4573 [ 23.031280] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.031298] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.032603] name_count maxed, losing inode data: dev=00:07, inode=8 [ 23.032619] name_count maxed, losing inode data: dev=00:07, inode=4579 [ 23.032666] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.032691] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.032868] name_count maxed, losing inode data: dev=00:07, inode=8 [ 23.032882] name_count maxed, losing inode data: dev=00:07, inode=4582 [ 23.032918] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.032934] name_count maxed, losing inode data: dev=00:05, inode=4 [ 23.033102] name_count maxed, losing inode data: dev=00:07, inode=8 [ 23.033115] name_count maxed, losing inode data: dev=00:07, inode=4586 [ 23.033130] loop: module loaded [ 24.346000] kjournald starting. Commit interval 5 seconds [ 24.346569] EXT3 FS on sda7, internal journal [ 24.346583] EXT3-fs: mounted filesystem with ordered data mode. [ 25.190877] RPC: Registered udp transport module. [ 25.190885] RPC: Registered tcp transport module. [ 25.190892] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.233875] Slow work thread pool: Starting up [ 25.234013] Slow work thread pool: Ready [ 25.234539] FS-Cache: Loaded [ 25.280151] name_count maxed, losing inode data: dev=00:12, inode=110 [ 25.280162] name_count maxed, losing inode data: dev=00:12, inode=108 [ 25.280175] FS-Cache: Netfs 'nfs' registered for caching [ 25.319058] Installing knfsd (copyright (C) 1996 [email protected]). [ 25.500206] fuse init (API version 7.13) [ 25.857934] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X [ 25.858543] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 27.452764] Bluetooth: Core ver 2.15 [ 27.452913] NET: Registered protocol family 31 [ 27.452919] Bluetooth: HCI device and connection manager initialized [ 27.452928] Bluetooth: HCI socket layer initialized [ 27.517866] Bluetooth: L2CAP ver 2.14 [ 27.517874] Bluetooth: L2CAP socket layer initialized [ 27.577133] Bluetooth: RFCOMM TTY layer initialized [ 27.577146] Bluetooth: RFCOMM socket layer initialized [ 27.577153] Bluetooth: RFCOMM ver 1.11 [ 27.627015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.627024] Bluetooth: BNEP filters: protocol multicast [ 27.698049] Bridge firewalling registered [ 27.757206] Bluetooth: SCO (Voice Link) ver 0.6 [ 27.757215] Bluetooth: SCO socket layer initialized [ 27.836918] lp: driver loaded but no devices found [ 27.907122] ppdev: user-space parallel port driver [ 30.050109] svc: failed to register lockdv1 RPC service (errno 97). [ 30.065794] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 30.295052] NFSD: starting 90-second grace period [ 30.704117] composite sync not supported [ 30.947689] composite sync not supported [ 36.772019] eth0: no IPv6 routers present [ 41.972088] type=1305 audit(1271225818.434:31772): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 [ 41.972109] type=1305 audit(1271225818.434:31773): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 [ 74.190953] composite sync not supported [ 74.452920] composite sync not supported [ 74.888587] composite sync not supported [ 92.269753] CPU0 attaching NULL sched-domain. [ 92.269771] CPU1 attaching NULL sched-domain. [ 92.296189] CPU0 attaching sched-domain: [ 92.296205] domain 0: span 0-1 level SIBLING [ 92.296218] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 92.296244] domain 1: span 0-1 level MC [ 92.296255] groups: 0-1 (cpu_power = 1178) [ 92.296275] CPU1 attaching sched-domain: [ 92.296285] domain 0: span 0-1 level SIBLING [ 92.296296] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 92.296319] domain 1: span 0-1 level MC [ 92.296329] groups: 0-1 (cpu_power = 1178) ** Model information not available ** Loaded modules: Module Size Used by ppdev 4058 0 lp 5570 0 parport 22554 2 ppdev,lp sco 5857 2 bridge 32987 0 stp 996 1 bridge bnep 7444 2 rfcomm 25167 0 l2cap 21705 6 bnep,rfcomm crc16 1027 1 l2cap bluetooth 36327 6 sco,bnep,rfcomm,l2cap acpi_cpufreq 4943 0 autofs4 16667 8 cpufreq_stats 1940 0 cpufreq_powersave 602 0 cpufreq_userspace 1480 0 cpufreq_conservative 4018 0 binfmt_misc 4907 1 fuse 43758 1 nfsd 193215 13 exportfs 2618 1 nfsd nfs 206674 0 lockd 49437 2 nfsd,nfs fscache 24662 1 nfs nfs_acl 1695 2 nfsd,nfs auth_rpcgss 25240 2 nfsd,nfs sunrpc 134630 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss loop 9757 0 snd_hda_codec_realtek 163166 1 snd_hda_intel 16595 3 snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 4054 1 snd_hda_codec snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47210 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 3576 0 snd_rawmidi 12505 1 snd_seq_midi usbhid 27980 0 hid 50629 1 usbhid snd_seq_midi_event 3684 1 snd_seq_midi joydev 6771 0 uvcvideo 45226 0 snd_seq 35463 3 snd_seq_midi,snd_seq_midi_event videodev 25545 1 uvcvideo v4l1_compat 10250 2 uvcvideo,videodev arc4 974 2 ecb 1405 2 snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq ac 1640 0 battery 3782 0 serio_raw 2916 0 psmouse 44421 0 evdev 5609 28 snd 34363 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ath9k 238333 0 uhci_hcd 16057 0 mac80211 123034 1 ath9k processor 26599 3 acpi_cpufreq ath 6014 1 ath9k ehci_hcd 27622 0 rng_core 2178 0 cfg80211 87601 3 ath9k,mac80211,ath usbcore 98302 5 usbhid,uvcvideo,uhci_hcd,ehci_hcd rfkill 10264 4 bluetooth,cfg80211 soundcore 3450 1 snd nls_base 4541 1 usbcore atl1e 23144 0 led_class 1757 1 ath9k snd_page_alloc 5045 2 snd_hda_intel,snd_pcm ext3 94200 2 jbd 32169 1 ext3 mbcache 3762 1 ext3 sd_mod 25785 4 crc_t10dif 1012 1 sd_mod thermal 9206 0 ata_generic 2015 0 ata_piix 17133 3 libata 114416 2 ata_generic,ata_piix scsi_mod 101305 2 sd_mod,libata i915 220304 3 drm_kms_helper 18297 1 i915 drm 112200 4 i915,drm_kms_helper i2c_algo_bit 3497 1 i915 button 3598 1 i915 i2c_core 12648 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit video 14605 1 i915 thermal_sys 9378 3 processor,thermal,video output 1204 1 video ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:23:54:89:62:a6 brd ff:ff:ff:ff:ff:ff inet 10.99.0.196/21 brd 10.99.7.255 scope global eth0 inet6 fe80::223:54ff:fe89:62a6/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:22:43:53:21:6c brd ff:ff:ff:ff:ff:ff 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 0e:60:2d:3a:c1:7d brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 5690437 48583 0 0 0 0 0 0 5690437 48583 0 0 0 0 0 0 eth0:845330545 857556 0 0 0 0 0 181 447603245 610582 0 0 0 0 2 0 wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 902436 total packets received 13 with invalid addresses 0 forwarded 0 incoming packets discarded 902423 incoming packets delivered 435895 requests sent out Icmp: 43 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo requests: 42 echo replies: 1 44 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 1 echo request: 1 echo replies: 42 IcmpMsg: InType0: 1 InType8: 42 OutType0: 42 OutType3: 1 OutType8: 1 Tcp: 233 active connections openings 11 passive connection openings 1 failed connection attempts 2 connection resets received 14 connections established 903644 segments received 438719 segments send out 0 segments retransmited 0 bad segments received. 13 resets sent Udp: 1449 packets received 1 packets to unknown port received. 0 packet receive errors 484 packets sent UdpLite: TcpExt: 39 TCP sockets finished time wait in fast timer 10319 delayed acks sent 6 delayed acks further delayed because of locked socket 40 packets directly queued to recvmsg prequeue. 22 bytes directly received in process context from prequeue 677763 packet headers predicted 742 acknowledgments not containing data payload received 297960 predicted acknowledgments 2 connections reset due to early user close IpExt: InMcastPkts: 188 OutMcastPkts: 69 InBcastPkts: 1483 InOctets: 838594093 OutOctets: 432925046 InMcastOctets: 31119 OutMcastOctets: 8284 InBcastOctets: 266739 *** Device features: eth0: 0x11989 lo: 0x13865 pan0: 0xff3865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbd00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at dc80 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at fbcc0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fbd80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:834a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbcb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 40000000-401fffff Prefetchable memory behind bridge: 0000000040200000-00000000403fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 0000000040400000-00000000405fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 0000000040600000-00000000407fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 20 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbcb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0400 [size=32] 01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) Subsystem: Device [1a3b:1067] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 02:00.0 Ethernet controller [0200]: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0) Subsystem: ASUSTeK Computer Inc. Device [1043:8324] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at ec80 [size=128] Capabilities: <access denied> Kernel driver in use: ATL1E ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1e54:2030 TypeMatrix 2030 USB Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 047d:1020 Kensington Expert Mouse Trackball Bus 001 Device 004: ID 05e3:0505 Genesys Logic, Inc. Bus 001 Device 003: ID 050d:0307 Belkin Components Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (800, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-4-686 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-4-686 depends on: ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii linux-base 2.6.32-11 Linux image base package ii module-init-tools 3.12~pre2-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-4-686 recommends: ii firmware-linux-free 2.6.32-9 Binary firmware for various driver ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-4-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-4-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20100414072805.7439.84723.report...@prem6s
