Ben Hutchings a écrit : > Martin, Aurelien, > > When switching from IDE to libata drivers I updated all per-architecture > configuration files but I failed to cover per-flavour configuration > files. These configuration files currently enable some IDE drivers and > the associated flavours may be broken due to the partial conversion: > > debian/config/armel/config.iop32x > debian/config/m68k/config.amiga > debian/config/m68k/config.atari > debian/config/m68k/config.mac > debian/config/m68k/config.q40 > debian/config/mips/config.4kc-malta (known broken; see #584784) > debian/config/mips/config.5kc-malta > debian/config/mips/config.r4k-ip22 > debian/config/mips/config.r5k-ip32 > debian/config/mips/config.sb1a-bcm91480b > debian/config/mips/config.sb1-bcm91250a > debian/config/mipsel/config.r5k-cobalt > debian/config/sh4/config.sh7751r > debian/config/sh4/config.sh7785lcr > > Ignoring m68k and sh4 as not release architectures, this leaves mostly > MIPS platforms. Since I know approximately nothing about these and I'm > not sure exactly which boot methods are supposed to be supported, I'll > have to ask you to review the configurations. I've attached a patch > which was my best guess at the necessary changes. > > Note that pata_generic replaces ide-pci-generic whereas pata_platform > appears to be the correct replacement for ide-generic. But you probably > knew that. >
I currently only tested the malta part, but unfortunately it doesn't fix the problem. Moreover, it does change the ABI. -- Aurelien Jarno GPG: 1024D/F1BCDB73 [email protected] http://www.aurel32.net -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
