Package: linux-image-2.6.30-bpo.2-686 Version: 2.6.30-7~bpo50+1 Severity: normal
I have a second parallel port that needs parport_pc parameters to operate and works when they are given, so I need a way to either tell parport_pc to use the autodetected port and the one I specify or tell or be able to specify the equivalent of the autodetected port. the followin outlines my attempts load the main parallel port driver with explicit port numbers if I do # modprobe parport_pc i get dmesg [3443.352797] parport_pc 00:07: activated [3443.352807] parport_pc 00:07: reported by Plug and Play ACPI [3443.352918] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] which works but if I do # modprobe parport_pc io=0x378 irq=7 i get dmesg [3988.717925] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [3988.717934] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [3988.717938] parport 0x378: You gave this address, but there is probably no parallel port there! [3988.717960] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] which doesn't work -- Package-specific info: ** Version: Linux version 2.6.30-bpo.2-686 (Debian 2.6.30-7~bpo50+1) (no...@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Tue Sep 22 14:34:48 UTC 2009 ** Command line: auto BOOT_IMAGE=new ro root=802 ** Tainted: G W (512) ** Kernel log: [5441824.724881] [<c01c9af8>] ? sysfs_add_one+0x9a/0xad [5441824.724888] [<c01c9f50>] ? create_dir+0x3c/0x62 [5441824.724893] [<c01c9f9f>] ? sysfs_create_dir+0x29/0x3b [5441824.724900] [<c020033c>] ? kobject_get+0xf/0x13 [5441824.724906] [<c020043a>] ? kobject_add_internal+0xb0/0x149 [5441824.724912] [<c02005f2>] ? kobject_add+0x44/0x47 [5441824.724919] [<c026bf60>] ? device_add+0xa1/0x45d [5441824.724926] [<c0200548>] ? kobject_set_name_vargs+0x45/0x4c [5441824.724932] [<c026b831>] ? dev_set_name+0x14/0x15 [5441824.724938] [<c026e7cd>] ? platform_device_add+0xca/0x108 [5441824.724944] [<c026e9b2>] ? platform_device_register_simple+0x34/0x4a [5441824.724956] [<f8db395f>] ? parport_pc_probe_port+0x32/0x790 [parport_pc] [5441824.724966] [<f8dbb2a1>] ? parport_pc_init+0x20d/0x330 [parport_pc] [5441824.724976] [<f8dbb094>] ? parport_pc_init+0x0/0x330 [parport_pc] [5441824.724982] [<c010113e>] ? do_one_initcall+0x55/0x155 [5441824.724989] [<c0147309>] ? sys_init_module+0x87/0x187 [5441824.724995] [<c0102ff4>] ? sysenter_do_call+0x12/0x28 [5441824.724999] ---[ end trace 26bc3dd30d1f3d78 ]--- [5441824.725005] kobject_add_internal failed for parport_pc.888 with -EEXIST, don't try to register things with the same name in the same directory. [5441824.725011] Pid: 23314, comm: modprobe Tainted: G W 2.6.30-bpo.2-686 #1 [5441824.725015] Call Trace: [5441824.725020] [<c02004c3>] ? kobject_add_internal+0x139/0x149 [5441824.725026] [<c02005f2>] ? kobject_add+0x44/0x47 [5441824.725032] [<c026bf60>] ? device_add+0xa1/0x45d [5441824.725038] [<c0200548>] ? kobject_set_name_vargs+0x45/0x4c [5441824.725044] [<c026b831>] ? dev_set_name+0x14/0x15 [5441824.725049] [<c026e7cd>] ? platform_device_add+0xca/0x108 [5441824.725055] [<c026e9b2>] ? platform_device_register_simple+0x34/0x4a [5441824.725065] [<f8db395f>] ? parport_pc_probe_port+0x32/0x790 [parport_pc] [5441824.725075] [<f8dbb2a1>] ? parport_pc_init+0x20d/0x330 [parport_pc] [5441824.725085] [<f8dbb094>] ? parport_pc_init+0x0/0x330 [parport_pc] [5441824.725090] [<c010113e>] ? do_one_initcall+0x55/0x155 [5441824.725096] [<c0147309>] ? sys_init_module+0x87/0x187 [5441824.725102] [<c0102ff4>] ? sysenter_do_call+0x12/0x28 [5441835.154724] ppdev0: registered pardevice [5441837.682164] ppdev0: released pardevice because user-space forgot [5441837.682173] ppdev0: unregistered pardevice [5441871.493019] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP] [5441876.499683] ppdev0: registered pardevice [5441877.634498] ppdev0: released pardevice because user-space forgot [5441877.634507] ppdev0: unregistered pardevice [5441891.846929] parport_pc: `0xc800' invalid for parameter `io' [5441901.843034] parport_pc: `0xc800' invalid for parameter `io' [5441906.387319] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP] [5441911.940516] parport_pc 00:07: activated [5441911.940525] parport_pc 00:07: reported by Plug and Play ACPI [5441911.940639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5441925.768558] parport_pc 00:07: disabled [5441925.791800] parport_pc 00:07: activated [5441925.791810] parport_pc 00:07: reported by Plug and Play ACPI [5441925.791922] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5441935.224187] parport_pc 00:07: disabled [5441935.248738] parport_pc 00:07: activated [5441935.248747] parport_pc 00:07: reported by Plug and Play ACPI [5441935.248860] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5441944.405268] parport_pc 00:07: disabled [5441944.413204] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP] [5441957.823071] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP] [5441983.652960] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [5441983.652969] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [5441983.652972] parport 0x378: You gave this address, but there is probably no parallel port there! [5441983.652995] parport0: PC-style at 0x378 [PCSPP,TRISTATE] [5441983.752241] parport1: PC-style at 0xc800 [PCSPP,TRISTATE,EPP] [5441995.227590] parport_pc 00:07: activated [5441995.227599] parport_pc 00:07: reported by Plug and Play ACPI [5441995.227711] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5442063.952737] parport_pc 00:07: disabled [5442063.963515] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [5442063.963524] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [5442063.963528] parport 0x378: You gave this address, but there is probably no parallel port there! [5442063.963552] parport0: PC-style at 0x378 [PCSPP,TRISTATE] [5442070.441724] parport_pc 00:07: activated [5442070.441732] parport_pc 00:07: reported by Plug and Play ACPI [5442070.441844] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5442099.048745] parport_pc 00:07: disabled [5442099.058528] parport_pc: `ACPI' invalid for parameter `io' [5443126.484193] parport_pc 00:07: activated [5443126.484203] parport_pc 00:07: reported by Plug and Play ACPI [5443126.484318] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5443175.681270] parport_pc 00:07: disabled [5443175.689460] parport_pc: `' invalid for parameter `io' [5443185.401398] parport_pc 00:07: activated [5443185.401408] parport_pc 00:07: reported by Plug and Play ACPI [5443185.401521] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [5443204.481240] parport_pc 00:07: disabled [5443204.491628] parport 0x30a (WARNING): CTR: wrote 0x0c, read 0xff [5443204.491636] parport 0x30a (WARNING): DATA: wrote 0xaa, read 0xff [5443204.491640] parport 0x30a: You gave this address, but there is probably no parallel port there! [5443204.491655] parport0: PC-style at 0x30a [PCSPP,TRISTATE] [5443215.683622] parport 0x778 (WARNING): CTR: wrote 0x0c, read 0xff [5443215.683631] parport 0x778 (WARNING): DATA: wrote 0xaa, read 0xff [5443215.683635] parport 0x778: You gave this address, but there is probably no parallel port there! [5443215.683658] parport0: PC-style at 0x778 [PCSPP,TRISTATE] [5443224.198819] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [5443224.198827] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [5443224.198831] parport 0x378: You gave this address, but there is probably no parallel port there! [5443224.198855] parport0: PC-style at 0x378 [PCSPP,TRISTATE] [5443249.318747] parport_pc 00:07: activated [5443249.318754] parport_pc 00:07: reported by Plug and Play ACPI [5443249.318864] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] ** Loaded modules: Module Size Used by parport_pc 22392 0 isofs 27592 0 udf 67044 0 nls_base 6416 2 isofs,udf crc_itu_t 2148 1 udf ppdev 6348 0 parport 31144 2 parport_pc,ppdev ppp_deflate 3944 0 zlib_deflate 17588 1 ppp_deflate bsd_comp 4908 0 ppp_async 7512 0 crc_ccitt 1816 1 ppp_async ppp_generic 21424 3 ppp_deflate,bsd_comp,ppp_async slhc 5012 1 ppp_generic i915 149008 2 drm 137736 3 i915 i2c_algo_bit 4860 1 i915 video 18060 1 i915 output 2604 1 video acpi_cpufreq 7608 0 cpufreq_stats 3520 0 cpufreq_conservative 6256 0 cpufreq_powersave 1292 0 cpufreq_userspace 2740 0 ext3 106880 0 jbd 40860 1 ext3 coretemp 5176 0 w83627ehf 17204 0 hwmon_vid 2480 1 w83627ehf loop 13292 0 snd_hda_codec_realtek 178576 1 snd_hda_intel 22196 5 snd_hda_codec 63596 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 6120 1 snd_hda_codec snd_pcm_oss 32240 0 snd_mixer_oss 12372 1 snd_pcm_oss snd_pcm 62396 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 5688 0 snd_rawmidi 18596 1 snd_seq_midi snd_seq_midi_event 6212 1 snd_seq_midi evdev 8032 7 snd_seq 42308 2 snd_seq_midi,snd_seq_midi_event snd_timer 17440 3 snd_pcm,snd_seq snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 37496 0 i2c_i801 8580 0 i2c_core 20808 4 i915,drm,i2c_algo_bit,i2c_i801 serio_raw 4560 0 pcspkr 2104 0 rng_core 3672 0 snd 49044 19 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device atl2 22976 0 asus_atk0110 6616 0 processor 34496 1 acpi_cpufreq button 5060 0 soundcore 6184 1 snd snd_page_alloc 8120 2 snd_hda_intel,snd_pcm ext4 196828 6 mbcache 6928 2 ext3,ext4 jbd2 49980 1 ext4 crc16 1760 1 ext4 dm_mirror 12560 0 dm_region_hash 10636 1 dm_mirror dm_log 8464 2 dm_mirror,dm_region_hash dm_snapshot 21692 0 dm_mod 49864 3 dm_mirror,dm_log,dm_snapshot sg 20288 0 sr_mod 13260 0 cdrom 30316 1 sr_mod sd_mod 28684 8 crc_t10dif 1632 1 sd_mod ide_pci_generic 3632 0 ata_generic 4340 0 usbhid 31476 0 hid 34464 1 usbhid ata_piix 20808 8 libata 150788 2 ata_generic,ata_piix piix 5708 0 scsi_mod 131584 4 sg,sr_mod,sd_mod,libata ide_core 87696 2 ide_pci_generic,piix uhci_hcd 19072 0 e100 27420 0 mii 4664 1 e100 ehci_hcd 29636 0 usbcore 125876 4 usbhid,uhci_hcd,ehci_hcd intel_agp 23116 1 agpgart 30856 3 drm,intel_agp floppy 46228 0 thermal 12576 0 fan 4044 0 thermal_sys 13140 4 video,processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard [1043:817a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:817a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at cfb00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 7800 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at cfb80000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8290] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at cfbf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: cff00000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 8000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 8400 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 8800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 9000 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at cfbffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000cfff Memory behind bridge: cfc00000-cfefffff Prefetchable memory behind bridge: 00000000eff00000-00000000efffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: PIIX_IDE 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:2601] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 23 Region 0: I/O ports at a800 [size=8] Region 1: I/O ports at a400 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus 01:00.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05) Subsystem: Intel Corporation 82558B PRO/100+ PCI (TP) [8086:0009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at effff000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at b400 [size=32] Region 2: Memory at cfd00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at cfc00000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 01:01.0 Serial controller [0700]: NetMos Technology PCI 9865 Multi-I/O Controller [9710:9865] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at b800 [size=8] Region 1: Memory at cfefb000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at cfefa000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 01:01.1 Serial controller [0700]: NetMos Technology PCI 9865 Multi-I/O Controller [9710:9865] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: Memory at cfefd000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at cfefc000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 01:01.2 Parallel controller [0701]: NetMos Technology PCI 9865 Multi-I/O Controller [9710:9865] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 16 bytes Interrupt: pin C routed to IRQ 5 Region 0: I/O ports at c800 [size=8] Region 1: I/O ports at c400 [size=8] Region 2: Memory at cfeff000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at cfefe000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Atheros Communications L2 Fast Ethernet [1969:2048] (rev a0) Subsystem: ASUSTeK Computer Inc. Device [1043:8233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at cffc0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at cffa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl2 -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (700, 'stable'), (650, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.30-bpo.2-686 (SMP w/2 CPU cores) Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.30-bpo.2-686 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-bpo.2-686 recommends: ii libc6-i686 2.7-18lenny2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-bpo.2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v ii lilo 1:22.8-7 LInux LOader - The Classic OS load ii linux-doc-2.6.30 2.6.30-8squeeze1 Linux kernel specific documentatio -- debconf-show failed -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100622122009.24806.26857.report...@news.localnet