Your message dated Thu, 8 Jul 2010 21:13:11 +0100
with message-id <[email protected]>
and subject line Re: Bug#588433: linux-image-2.6.32-5-686: tries to run
update-grub, although grub isn't installed anymore
has caused the Debian Bug report #588433,
regarding linux-image-2.6.32-5-686: tries to run update-grub, although grub
isn't installed anymore
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
588433: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=588433
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-16
Severity: normal
Hi,
today the linux-image-2.6.32-5-686 (2.6.32-16) package failed for me during the
configuration phase. When the postinst script is run manually, the following
happens:
$ sudo LANG=C /var/lib/dpkg/info/linux-image-`uname -r`.postinst configure
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-5-686
initrd.img(/boot/initrd.img-2.6.32-5-686
) points to /boot/initrd.img-2.6.32-5-686
(/boot/initrd.img-2.6.32-5-686) -- doing nothing at /var/lib/dpkg/info/linux-
image-2.6.32-5-686.postinst line 379.
vmlinuz(/boot/vmlinuz-2.6.32-5-686
) points to /boot/vmlinuz-2.6.32-5-686
(/boot/vmlinuz-2.6.32-5-686) -- doing nothing at /var/lib/dpkg/info/linux-
image-2.6.32-5-686.postinst line 379.
Running update-grub.
User postinst hook script [update-grub] failed to execute: No such file or
directory
So it fails to start update-grub, which is expected as I have purged all grub
packages from my system and replaced it with the extlinux bootloader instead.
However, grub-pc is still set as postinst_hook in /etc/kernel-img.conf:
$ grep grub /etc/kernel-img.conf
postinst_hook = update-grub
postrm_hook = update-grub
Please note that I have never ever touched this file. It should not blindly
rely the existance of update-grub.
Cheers,
Fabian
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-16) ([email protected]) (gcc
version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jul 6 14:57:57 UTC 2010
** Command line:
initrd=/boot/initrd.img-2.6.32-5-686
root=UUID=e6445315-c5bf-4e2c-b011-3ed84748fd53 ro quiet
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
** Not tainted
** Kernel log:
[ 1.267887] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000
[ 1.273371] libata version 3.00 loaded.
[ 1.276165] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.276207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.276208] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.276210] usb usb1: Product: EHCI Host Controller
[ 1.276212] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.276213] usb usb1: SerialNumber: 0000:00:0b.0
[ 1.276533] usb usb1: configuration #1 chosen from 1 choice
[ 1.276596] hub 1-0:1.0: USB hub found
[ 1.276602] hub 1-0:1.0: 8 ports detected
[ 1.278578] ata_piix 0000:00:01.1: version 2.13
[ 1.278925] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.283457] scsi0 : ata_piix
[ 1.283803] scsi1 : ata_piix
[ 1.284000] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.284002] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.284297] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.284348] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.284366] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus
number 2
[ 1.284443] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
[ 1.340199] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.340202] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.340203] usb usb2: Product: OHCI Host Controller
[ 1.340205] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.340206] usb usb2: SerialNumber: 0000:00:06.0
[ 1.340284] usb usb2: configuration #1 chosen from 1 choice
[ 1.340302] hub 2-0:1.0: USB hub found
[ 1.340360] hub 2-0:1.0: 8 ports detected
[ 1.440679] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.440943] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.440945] ata1.00: 16777216 sectors, multi 128: LBA
[ 1.441587] ata2.00: configured for UDMA/33
[ 1.441766] ata1.00: configured for UDMA/33
[ 1.441985] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0
PQ: 0 ANSI: 5
[ 1.442390] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0
PQ: 0 ANSI: 5
[ 1.478171] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58
GB/8.00 GiB)
[ 1.478202] sd 0:0:0:0: [sda] Write Protect is off
[ 1.478204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.478216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.478336] sda: sda1 sda2 <sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.481173] Uniform CD-ROM driver Revision: 3.20
[ 1.481428] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.485832] sda5 sda6 >
[ 1.493719] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.533184] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.533486] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.765793] PM: Starting manual resume from disk
[ 1.765795] PM: Resume from partition 8:5
[ 1.765796] PM: Checking hibernation image.
[ 1.765982] PM: Error -22 checking image file
[ 1.765983] PM: Resume from disk failed.
[ 1.802971] kjournald starting. Commit interval 5 seconds
[ 1.802979] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.812132] udev: starting version 158
[ 3.528405] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.530095] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at
00000000f0400000 (size 0x400000)
[ 3.530098] vboxguest: Successfully loaded version 3.2.2 (interface
0x00010004)
[ 3.530701] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.536741] ACPI: AC Adapter [AC] (on-line)
[ 3.539764] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.539767] ACPI: Power Button [PWRF]
[ 3.539896] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 3.539898] ACPI: Sleep Button [SLPF]
[ 3.551673] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.581994] piix4_smbus 0000:00:07.0: SMBus base address uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 3.592721] processor LNXCPU:00: registered as cooling_device0
[ 3.595793] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 4.385565] Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 4.708109] intel8x0_measure_ac97_clock: measured 55694 usecs (9915 samples)
[ 4.708111] intel8x0: measured clock 178026 rejected
[ 5.068082] intel8x0_measure_ac97_clock: measured 55042 usecs (7739 samples)
[ 5.068084] intel8x0: measured clock 140601 rejected
[ 5.428081] intel8x0_measure_ac97_clock: measured 55880 usecs (7693 samples)
[ 5.428083] intel8x0: measured clock 137670 rejected
[ 5.428084] intel8x0: clocking to 48000
[ 6.096787] Adding 329292k swap on /dev/sda5. Priority:-1 extents:1
across:329292k
[ 6.273279] EXT3 FS on sda1, internal journal
[ 6.399830] loop: module loaded
[ 7.155785] kjournald starting. Commit interval 5 seconds
[ 7.156075] EXT3 FS on sda6, internal journal
[ 7.156078] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.182150] vboxsf: Successfully loaded version 3.2.2 (interface 0x00010004)
[ 9.483847] Bluetooth: Core ver 2.15
[ 9.492068] NET: Registered protocol family 31
[ 9.492070] Bluetooth: HCI device and connection manager initialized
[ 9.492071] Bluetooth: HCI socket layer initialized
[ 9.557754] Bluetooth: L2CAP ver 2.14
[ 9.557756] Bluetooth: L2CAP socket layer initialized
[ 9.706885] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.706887] Bluetooth: BNEP filters: protocol multicast
[ 9.730550] Bridge firewalling registered
[ 9.744947] eth0: link up
[ 9.911442] Bluetooth: SCO (Voice Link) ver 0.6
[ 9.911444] Bluetooth: SCO socket layer initialized
[ 12.999521] [drm] Initialized drm 1.1.0 20060810
[ 13.001043] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.001401] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on
minor 0
[ 19.825250] eth0: no IPv6 routers present
[ 1761.884014] hrtimer: interrupt took 7998187 ns
** Model information
not available
** Loaded modules:
Module Size Used by
vboxvideo 1073 1
drm 112020 2 vboxvideo
cpufreq_powersave 602 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
l2cap 21705 3 bnep
crc16 1027 1 l2cap
bluetooth 36327 5 sco,bnep,l2cap
rfkill 10264 3 bluetooth
vboxsf 25952 1
loop 9757 0
snd_intel8x0 19523 0
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 9
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_piix4 7076 0
soundcore 3450 1 snd
parport_pc 15799 0
processor 26599 0
button 3598 0
evdev 5609 7
ac 1640 0
parport 22554 1 parport_pc
pcspkr 1207 0
i2c_core 12696 2 drm,i2c_piix4
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
psmouse 44657 0
vboxguest 97409 7 vboxsf
serio_raw 2916 0
ext3 94204 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25869 4
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
ohci_hcd 16880 0
ata_piix 17640 3
ehci_hcd 27851 0
thermal 9206 0
libata 115721 2 ata_generic,ata_piix
floppy 40923 0
thermal_sys 9378 2 processor,thermal
pcnet32 22226 0
mii 2714 1 pcnet32
usbcore 98402 3 ohci_hcd,ehci_hcd
nls_base 4541 2 vboxsf,usbcore
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1104 8 0 0 0 0 0 0 1104
8 0 0 0 0 0 0
eth0: 25950 106 0 0 0 0 0 0 15607
142 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
72 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
70 incoming packets delivered
131 requests sent out
32 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
5 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
39 segments received
38 segments send out
0 segments retransmited
0 bad segments received.
1 resets sent
Udp:
31 packets received
0 packets to unknown port received.
0 packet receive errors
91 packets sent
UdpLite:
TcpExt:
2 delayed acks sent
14 packet headers predicted
5 acknowledgments not containing data payload received
5 predicted acknowledgments
IpExt:
InMcastPkts: 9
OutMcastPkts: 11
InOctets: 25693
OutOctets: 11232
InMcastOctets: 2469
OutMcastOctets: 2549
*** Device features:
eth0: 0x0
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma]
[8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton
II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH
VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970
[PCnet32 LANCE] [1022:2000] (rev 10)
Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971 [1022:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: pcnet32
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest
Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d040 [size=32]
Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97
Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d100 [size=256]
Region 1: I/O ports at d200 [size=64]
Kernel driver in use: Intel ICH
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 9
00:0b.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci_hcd
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (501, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs
ii linux-base 2.6.32-16 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-16 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---
On Thu, Jul 08, 2010 at 12:10:09PM +0200, Fabian Greffrath wrote:
[...]
> So it fails to start update-grub, which is expected as I have purged all grub
> packages from my system and replaced it with the extlinux bootloader instead.
> However, grub-pc is still set as postinst_hook in /etc/kernel-img.conf:
>
> $ grep grub /etc/kernel-img.conf
> postinst_hook = update-grub
> postrm_hook = update-grub
>
> Please note that I have never ever touched this file. It should not blindly
> rely the existance of update-grub.
That file is created by the installer. If you choose to install GRUB during
the initial installation then it sets these hook commands. This is in no way
a bug in the kernel package.
Ben.
--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus
--- End Message ---
