Package: linux-2.6 Version: 2.6.32-18 Severity: normal
[ 0.004000] ------------[ cut here ]------------ [ 0.004000] WARNING: at /build/buildd-linux-2.6_2.6.32-18-i386-HNrmOz/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten.c:731 perf_events_lapic_init+0x28/0x29() [ 0.004000] Hardware name: VirtualBox [ 0.004000] Modules linked in: [ 0.004000] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-686 #1 [ 0.004000] Call Trace: [ 0.004000] [<c10370a5>] ? warn_slowpath_common+0x5e/0x8a [ 0.004000] [<c10370db>] ? warn_slowpath_null+0xa/0xc [ 0.004000] [<c1011bb0>] ? perf_events_lapic_init+0x28/0x29 [ 0.004000] [<c140307d>] ? init_hw_perf_events+0x2dd/0x376 [ 0.004000] [<c1402cd0>] ? check_bugs+0x8/0xd8 [ 0.004000] [<c13fb7fe>] ? start_kernel+0x309/0x31d [ 0.004000] [<c13fd3c3>] ? xen_start_kernel+0x615/0x61c [ 0.004000] [<c1409045>] ? print_local_APIC+0x61/0x380 [ 0.004000] ---[ end trace a7919e7f17c0a725 ]--- -- Package-specific info: ** Version: Linux version 2.6.32-5-xen-686 (Debian 2.6.32-18) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 07:00:17 UTC 2010 ** Command line: root=UUID=e4c2a533-6ef3-44dc-a990-7008664951a3 ro quiet ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 3.318557] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 3.384604] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 3.408181] sd 0:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB) [ 3.408335] sd 0:0:0:0: [sda] Write Protect is off [ 3.408341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.408406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.408750] sda: sda1 sda2 <sr0: scsi3-mmc drive: 32x/32x xa/form2 tray [ 3.426157] Uniform CD-ROM driver Revision: 3.20 [ 3.426952] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.448355] sda5 > [ 3.450546] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.587924] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.593307] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.669180] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021 [ 3.669198] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 3.669207] usb 2-1: Product: USB Tablet [ 3.669215] usb 2-1: Manufacturer: VirtualBox [ 3.669449] usb 2-1: configuration #1 chosen from 1 choice [ 3.749855] usbcore: registered new interface driver hiddev [ 3.766284] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input1 [ 3.766426] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 3.766510] usbcore: registered new interface driver usbhid [ 3.766517] usbhid: v2.6:USB HID core driver [ 4.345200] PM: Starting manual resume from disk [ 4.345226] PM: Resume from partition 8:5 [ 4.345248] PM: Checking hibernation image. [ 4.349417] PM: Error -22 checking image file [ 4.349424] PM: Resume from disk failed. [ 4.478484] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 6.237035] udev: starting version 158 [ 7.824810] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 8.103234] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr [ 8.162426] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 8.162533] ACPI: Power Button [PWRF] [ 8.162681] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4 [ 8.162723] ACPI: Sleep Button [SLPF] [ 8.194624] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 8.378664] ACPI: AC Adapter [AC] (on-line) [ 8.638724] Error: Driver 'pcspkr' is already registered, aborting... [ 9.267065] xen: registering gsi 21 triggering 0 polarity 1 [ 9.267124] xen_allocate_pirq: returning irq 21 for gsi 21 [ 9.267169] xen: --> irq=21 [ 9.267228] Already setup the GSI :21 [ 9.267268] Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.267513] Intel ICH 0000:00:05.0: setting latency timer to 64 [ 9.309777] parport_pc 00:04: reported by Plug and Play ACPI [ 10.169086] intel8x0_measure_ac97_clock: measured 180996 usecs (15636 samples) [ 10.169102] intel8x0: measured clock 86388 rejected [ 10.528351] intel8x0_measure_ac97_clock: measured 55861 usecs (7680 samples) [ 10.528534] intel8x0: measured clock 137484 rejected [ 10.890173] intel8x0_measure_ac97_clock: measured 57725 usecs (7680 samples) [ 10.890180] intel8x0: measured clock 133044 rejected [ 10.890186] intel8x0: clocking to 48000 [ 11.953866] Adding 915664k swap on /dev/sda5. Priority:-1 extents:1 across:915664k [ 12.873884] loop: module loaded [ 16.514618] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.519687] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 16.520758] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.067571] Event-channel device installed. [ 19.683566] XENBUS: Unable to read cpu state [ 22.743237] Bridge firewalling registered [ 27.368132] eth0: no IPv6 routers present [ 308.858296] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 308.861086] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 308.862187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 319.496161] eth0: no IPv6 routers present [ 987.454100] e1000: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 987.455342] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 987.456198] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 987.541792] device peth0 entered promiscuous mode [ 987.659447] eth0: port 1(peth0) entering forwarding state [ 997.544749] peth0: no IPv6 routers present [ 997.952194] eth0: no IPv6 routers present [ 1157.090246] kjournald starting. Commit interval 5 seconds [ 1157.090414] EXT3 FS on loop0, internal journal [ 1157.090427] EXT3-fs: mounted filesystem with ordered data mode. [ 1776.613473] device vif1.0 entered promiscuous mode [ 1776.695398] eth0: port 2(vif1.0) entering forwarding state [ 1777.149095] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1778.185144] nf_conntrack version 0.5.0 (5862 buckets, 23448 max) [ 1778.187459] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1778.187477] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1778.187483] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1778.338441] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1781.433561] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi) [ 1781.469050] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_32-abi) [ 1786.813580] vif1.0: no IPv6 routers present [ 1841.293272] eth0: port 2(vif1.0) entering disabled state [ 1841.293451] eth0: port 2(vif1.0) entering disabled state [ 1844.912013] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1857.655734] kjournald starting. Commit interval 5 seconds [ 1857.655801] EXT3 FS on loop0, internal journal [ 1857.655808] EXT3-fs: recovery complete. [ 1857.655834] EXT3-fs: mounted filesystem with ordered data mode. [ 1889.388906] device vif2.0 entered promiscuous mode [ 1889.456007] eth0: port 2(vif2.0) entering forwarding state [ 1890.200021] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1894.096451] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi) [ 1894.159136] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi) [ 1899.471204] vif2.0: no IPv6 routers present ** Model information not available ** Loaded modules: Module Size Used by nf_conntrack_ipv4 7597 1 nf_defrag_ipv4 779 1 nf_conntrack_ipv4 xt_state 927 1 nf_conntrack 38071 2 nf_conntrack_ipv4,xt_state xt_physdev 1228 2 iptable_filter 1790 1 ip_tables 7690 1 iptable_filter x_tables 8327 3 xt_state,xt_physdev,ip_tables ext3 94196 0 jbd 32161 1 ext3 bridge 32983 0 stp 996 1 bridge xen_evtchn 3411 2 xenfs 7224 1 loop 9753 4 parport_pc 15871 0 snd_intel8x0 19523 0 parport 22554 1 parport_pc snd_ac97_codec 79148 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec processor 30973 0 ac 1640 0 joydev 6771 0 acpi_processor 3635 1 processor,[permanent] snd_pcm 47402 2 snd_intel8x0,snd_ac97_codec snd_timer 12258 1 snd_pcm i2c_piix4 7124 0 button 3598 0 psmouse 44653 0 evdev 5609 3 pcspkr 1207 0 snd 34363 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer serio_raw 2916 0 i2c_core 12696 1 i2c_piix4 soundcore 3450 1 snd snd_page_alloc 5109 2 snd_intel8x0,snd_pcm ext4 254973 1 mbcache 3762 2 ext3,ext4 jbd2 56059 1 ext4 crc16 1027 1 ext4 usbhid 28024 0 hid 50641 1 usbhid sg 15976 0 sr_mod 10770 0 sd_mod 25865 3 crc_t10dif 1012 1 sd_mod cdrom 26487 1 sr_mod ata_generic 2019 0 ata_piix 17696 0 ahci 27262 2 ohci_hcd 17068 0 thermal 9206 0 ehci_hcd 28255 0 libata 116021 3 ata_generic,ata_piix,ahci thermal_sys 9378 2 processor,thermal usbcore 98742 4 usbhid,ohci_hcd,ehci_hcd e1000 77749 0 nls_base 4541 1 usbcore scsi_mod 101397 4 sg,sr_mod,sd_mod,libata ** Network interface configuration: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.120 netmask 255.255.255.0 gateway 192.168.2.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 08:00:27:ec:55:af brd ff:ff:ff:ff:ff:ff inet6 fe80::a00:27ff:feec:55af/64 scope link valid_lft forever preferred_lft forever 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 08:00:27:ec:55:af brd ff:ff:ff:ff:ff:ff inet 192.168.2.120/24 brd 192.168.2.255 scope global eth0 inet6 fe80::a00:27ff:feec:55af/64 scope link valid_lft forever preferred_lft forever 5: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 peth0:155922592 176556 0 0 0 0 0 1406 3018785 40163 0 0 0 0 0 0 eth0:109720090 83282 0 0 0 0 0 1637 2906933 39491 0 0 0 0 0 0 vif2.0: 7292 54 0 0 0 0 0 0 105871 1041 0 8 0 0 0 0 *** Protocol statistics: Ip: 82585 total packets received 3 with invalid addresses 0 forwarded 0 incoming packets discarded 82420 incoming packets delivered 40013 requests sent out Icmp: 1 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 1 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: IcmpMsg: InType3: 1 Tcp: 132 active connections openings 1 passive connection openings 0 failed connection attempts 0 connection resets received 1 connections established 82107 segments received 39745 segments send out 3 segments retransmited 0 bad segments received. 6 resets sent Udp: 267 packets received 0 packets to unknown port received. 0 packet receive errors 265 packets sent UdpLite: TcpExt: 129 TCP sockets finished time wait in fast timer 31 delayed acks sent 18 packets directly queued to recvmsg prequeue. 514917 bytes directly in process context from backlog 24121 bytes directly received in process context from prequeue 78134 packet headers predicted 404 packets header predicted and directly queued to user 933 acknowledgments not containing data payload received 38 predicted acknowledgments 2 retransmits in slow start 1 other TCP timeouts 1 DSACKs received TCPDSACKIgnoredOld: 1 TCPSackShiftFallback: 1 IpExt: InBcastPkts: 47 InOctets: 110006489 OutOctets: 2444099 InBcastOctets: 10018 *** Device features: eth0: 0x11829 lo: 0x13865 peth0: 0x10ba9 vif2.0: 0x10803 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d000 [size=16] Kernel driver in use: ata_piix 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] 00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02) Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min) Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d010 [size=8] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel driver in use: e1000 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d020 [size=32] Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K] 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d100 [size=256] Region 1: I/O ports at d200 [size=64] Kernel driver in use: Intel ICH 00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin ? routed to IRQ 9 00:0b.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ehci_hcd 00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d240 [size=8] Region 1: I/O ports at <ignored> Region 2: I/O ports at d250 [size=8] Region 3: I/O ports at <ignored> Region 4: I/O ports at d260 [size=16] Region 5: Memory at f0806000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: ahci ** USB devices: Bus 002 Device 002: ID 80ee:0021 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-xen-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-xen-686 depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii initramfs-tools 0.97.2 tools for generating an initramfs ii linux-base 2.6.32-18 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-xen-686 recommends: ii firmware-linux-free 2.6.32-18 Binary firmware for various driver ii libc6-xen 2.11.2-2 GNU C Library: Shared libraries [X Versions of packages linux-image-2.6.32-5-xen-686 suggests: pn grub <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-xen-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) ii xen-hypervisor-4.0-i386 [xen 4.0.1~rc3-1 The Xen Hypervisor on i386 -- debconf information: linux-image-2.6.32-5-xen-686/postinst/depmod-error-initrd-2.6.32-5-xen-686: false linux-image-2.6.32-5-xen-686/postinst/ignoring-do-bootloader-2.6.32-5-xen-686: linux-image-2.6.32-5-xen-686/prerm/removing-running-kernel-2.6.32-5-xen-686: true linux-image-2.6.32-5-xen-686/postinst/missing-firmware-2.6.32-5-xen-686: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20100810130716.22786.28682.report...@xen
