/dev/sda:

ATA device, with non-removable media
        Model Number:       FUJITSU MHV2060AT                       
        Serial Number:      NS12T5425FGT
        Firmware Revision:  00000096
Standards:
        Used: ATA/ATAPI-6 T13 1410D revision 3a 
        Supported: 6 5 4 
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  117210240
        Logical/Physical Sector size:           512 bytes
        device size with M = 1024*1024:       57231 MBytes
        device size with M = 1000*1000:       60011 MBytes (60 GB)
        cache/buffer size  = 8192 KBytes (type=DualPortCache)
Capabilities:
        LBA, IORDY(cannot be disabled)
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 16  Current = 16
        Advanced power management level: 128
        Recommended acoustic management value: 254, current value: 254
        DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4 
             Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    Host Protected Area feature set
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    DOWNLOAD_MICROCODE
           *    Advanced Power Management feature set
                Power-Up In Standby feature set
                SET_MAX security extension
           *    Automatic Acoustic Management feature set
           *    Device Configuration Overlay feature set
           *    Mandatory FLUSH_CACHE
           *    SMART error logging
           *    SMART self-test
           *    IDLE_IMMEDIATE with UNLOAD
           *    SMART Command Transport (SCT) feature set
           *    SCT LBA Segment Access (AC2)
           *    SCT Error Recovery Control (AC3)
           *    SCT Features Control (AC4)
           *    SCT Data Tables (AC5)
Security: 
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
        not     supported: enhanced erase
        60min for SECURITY ERASE UNIT. 
HW reset results:
        CBLID- below Vih
        Device num = 0 determined by the jumper
Checksum: correct



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1oojvw-0t0...@nano.pabloscortes.dyndns.org

Reply via email to