Package: linux-2.6 Version: 2.6.32-21 i'm experiencing very similar issues, although also with earlier versions of linux-image-2.6.32-5-686.
i first started having this problem after upgrading to squeeze from lenny, although i was running the exact same linux-image-2.6.32-* directly on lenny for quite some time without problems. i had been using uswsusp, but after experiencing this problem several times, i purged uswsusp and switched to using the in-kernel resume with pm-hibernate. an example OOPS below, if it's at all useful: Sep 5 19:00:35 mneme kernel: [ 7750.522234] BUG: unable to handle kernel NULL pointer dereference at 00000010 Sep 5 19:00:35 mneme kernel: [ 7750.522243] IP: [<c108cdc7>] file_ra_state_init+0x3/0x18 Sep 5 19:00:35 mneme kernel: [ 7750.522256] *pde = 00000000 Sep 5 19:00:35 mneme kernel: [ 7750.522261] Oops: 0000 [#3] SMP Sep 5 19:00:35 mneme kernel: [ 7750.522266] last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map Sep 5 19:00:35 mneme kernel: [ 7750.522272] Modules linked in: mct_u232 usbserial tun ip6table_filter ip6_tables iptable_filter ip_tables x_tables parport_pc ppdev lp parport sco bridge stp bnep rfcomm l2cap crc16 bluetooth acpi_cpufreq cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace kvm_intel kvm uinput fuse firewire_sbp2 loop snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq i915 snd_timer drm_kms_helper joydev snd_seq_device arc4 ecb drm b43 snd yenta_socket soundcore i2c_i801 i2c_algo_bit psmouse snd_page_alloc rsrc_nonstatic mac80211 dell_laptop i2c_core rng_core serio_raw evdev dcdbas video cfg80211 output button processor battery ac rfkill ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc dm_crypt dm_mod sd_mod crc_t10dif ata_generic ssb sdhci_pci sdhci ata_piix mmc_core firewire_ohci tg3 libata pcmcia thermal uhci_hcd led_class firewire_core crc_itu_t libphy scsi_mod ehci_hcd therma Sep 5 19:00:35 mneme kernel: l_sys pcmcia_core usbcore nls_base [last unloaded: scsi_wait_scan] Sep 5 19:00:35 mneme kernel: [ 7750.522412] Sep 5 19:00:35 mneme kernel: [ 7750.522418] Pid: 10665, comm: x-terminal-emul Tainted: G D (2.6.32-5-686 #1) Latitude D420 Sep 5 19:00:35 mneme kernel: [ 7750.522424] EIP: 0060:[<c108cdc7>] EFLAGS: 00210202 CPU: 1 Sep 5 19:00:35 mneme kernel: [ 7750.522429] EIP is at file_ra_state_init+0x3/0x18 Sep 5 19:00:35 mneme kernel: [ 7750.522434] EAX: ef7f45c8 EBX: 00000000 ECX: d5699800 EDX: 00000000 Sep 5 19:00:35 mneme kernel: [ 7750.522438] ESI: ef7f4580 EDI: 00000000 EBP: f6f73b18 ESP: c49a3ea0 Sep 5 19:00:35 mneme kernel: [ 7750.522443] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Sep 5 19:00:35 mneme kernel: [ 7750.522448] Process x-terminal-emul (pid: 10665, ti=c49a2000 task=efaa1100 task.ti=c49a2000) Sep 5 19:00:35 mneme kernel: [ 7750.522452] Stack: Sep 5 19:00:35 mneme kernel: [ 7750.522455] c10b114b f6f28080 f68bb220 c49a3f00 ef7f4580 c49a3f00 c49a3f00 00000003 Sep 5 19:00:35 mneme kernel: [ 7750.522465] <0> c10b12ac ef7f4580 c10b4c40 f6cdfe80 00000000 c49a3f00 c10bb254 00000000 Sep 5 19:00:35 mneme kernel: [ 7750.522476] <0> 00000002 efa7a000 ffffff9c c1c7cbc0 b7112000 00000000 fffa0844 ef992898 Sep 5 19:00:35 mneme kernel: [ 7750.522488] Call Trace: Sep 5 19:00:35 mneme kernel: [ 7750.522495] [<c10b114b>] ? __dentry_open+0x176/0x246 Sep 5 19:00:35 mneme kernel: [ 7750.522502] [<c10b12ac>] ? nameidata_to_filp+0x29/0x3c Sep 5 19:00:35 mneme kernel: [ 7750.522509] [<c10b4c40>] ? chrdev_open+0x0/0x116 Sep 5 19:00:35 mneme kernel: [ 7750.522516] [<c10bb254>] ? do_filp_open+0x43f/0x802 Sep 5 19:00:35 mneme kernel: [ 7750.522524] [<c10c2f65>] ? alloc_fd+0x52/0xb7 Sep 5 19:00:35 mneme kernel: [ 7750.522530] [<c10b0ee3>] ? do_sys_open+0x4c/0xdf Sep 5 19:00:35 mneme kernel: [ 7750.522536] [<c10b0fba>] ? sys_open+0x1e/0x23 Sep 5 19:00:35 mneme kernel: [ 7750.522543] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Sep 5 19:00:35 mneme kernel: [ 7750.522547] Code: c3 53 89 d3 ff 74 24 0c ff 74 24 0c e8 0e 93 fa ff 5a 59 85 c0 75 0e 85 db 74 0a c7 05 34 fc 4a c1 00 00 00 00 5b c3 90 8b 52 40 <8b> 52 10 c7 40 14 ff ff ff ff c7 40 18 ff ff ff ff 89 50 0c c3 Sep 5 19:00:35 mneme kernel: [ 7750.522607] EIP: [<c108cdc7>] file_ra_state_init+0x3/0x18 SS:ESP 0068:c49a3ea0 Sep 5 19:00:35 mneme kernel: [ 7750.522616] CR2: 0000000000000010 Sep 5 19:00:35 mneme kernel: [ 7750.522620] ---[ end trace f383376f90ced1d2 ]--- live well, vagrant -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-21) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 14:28:12 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/mneme-rwt ro quiet ** Not tainted ** Kernel log: [ 5400.080272] CPU: Physical Processor ID: 0 [ 5400.080272] CPU: Processor Core ID: 1 [ 5400.080272] CPU1: Thermal monitoring enabled (TM2) [ 5400.180074] CPU1: Genuine Intel(R) CPU U2500 @ 1.20GHz stepping 08 [ 5400.180167] kvm: enabling virtualization on CPU1 [ 5400.180268] CPU0 attaching NULL sched-domain. [ 5400.208025] CPU0 attaching sched-domain: [ 5400.208030] domain 0: span 0-1 level MC [ 5400.208034] groups: 0 1 [ 5400.208040] CPU1 attaching sched-domain: [ 5400.208044] domain 0: span 0-1 level MC [ 5400.208047] groups: 1 0 [ 5400.208901] CPU1 is up [ 5400.209482] ACPI: Waking up from system sleep state S4 [ 5400.216607] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 5400.217063] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20030200, writing 0x20060200) [ 5400.217166] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 5400.217277] b43-pci-bridge 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100103, writing 0x100107) [ 5400.217410] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xf (was 0x74001ff, writing 0x58001ff) [ 5400.217437] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 5400.232055] firewire_ohci 0000:02:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [ 5400.232066] firewire_ohci 0000:02:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 5400.248055] sdhci-pci 0000:02:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [ 5400.248066] sdhci-pci 0000:02:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 5400.327344] i915 0000:00:02.0: setting latency timer to 64 [ 5400.992279] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 5400.992289] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5400.992321] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5400.992365] usb usb2: root hub lost power or was reset [ 5400.992385] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5400.992429] usb usb3: root hub lost power or was reset [ 5400.992451] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5400.992494] usb usb4: root hub lost power or was reset [ 5400.992515] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5400.992560] usb usb5: root hub lost power or was reset [ 5400.992579] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5400.992586] usb usb1: root hub lost power or was reset [ 5400.996462] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5400.996482] pci 0000:00:1e.0: setting latency timer to 64 [ 5400.996497] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5400.996504] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 5400.996537] ata1.00: _GTF evaluation failed (AE 0x1001) [ 5400.996710] ata2: port disabled. ignoring. [ 5400.996732] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5401.168708] ata1.00: configured for UDMA/100 [ 5401.236157] firewire_core: skipped bus generations, destroying all nodes [ 5401.236171] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5401.736150] firewire_core: rediscovered device fw0 [ 5402.088142] sd 0:0:0:0: [sda] Starting disk [ 5402.292123] usb 2-2: reset full speed USB device using uhci_hcd and address 2 [ 5402.737206] usb 2-2.3: reset full speed USB device using uhci_hcd and address 3 [ 5403.149219] usb 2-2.3.2: reset full speed USB device using uhci_hcd and address 4 [ 5403.416140] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 5403.516470] PM: Image restored successfully. [ 5403.516474] Restarting tasks ... done. [ 5403.526358] PM: Basic memory bitmaps freed [ 5403.641518] wlan0: deauthenticated from 00:14:bf:28:b9:a8 (Reason: 7) [ 5403.812068] usb 5-1: new low speed USB device using uhci_hcd and address 3 [ 5403.995901] usb 5-1: New USB device found, idVendor=046d, idProduct=c00e [ 5403.995907] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5403.995912] usb 5-1: Product: USB-PS/2 Optical Mouse [ 5403.995916] usb 5-1: Manufacturer: Logitech [ 5403.996071] usb 5-1: configuration #1 chosen from 1 choice [ 5404.012464] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input12 [ 5404.012638] generic-usb 0003:046D:C00E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-1/input0 [ 5425.140166] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 5425.240998] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5427.196347] wlan0: direct probe to AP 00:14:bf:28:b9:a8 (try 1) [ 5427.198315] wlan0: direct probe responded [ 5427.198325] wlan0: authenticate with AP 00:14:bf:28:b9:a8 (try 1) [ 5427.200171] wlan0: authenticated [ 5427.200215] wlan0: associate with AP 00:14:bf:28:b9:a8 (try 1) [ 5427.202300] wlan0: RX AssocResp from 00:14:bf:28:b9:a8 (capab=0x401 status=0 aid=2) [ 5427.202308] wlan0: associated [ 5427.208692] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5437.496043] wlan0: no IPv6 routers present [ 8691.879014] kjournald starting. Commit interval 5 seconds [ 8691.880567] EXT3 FS on dm-6, internal journal [ 8691.880578] EXT3-fs: mounted filesystem with ordered data mode. [12188.513312] device ltsp0 entered promiscuous mode [12188.513352] br0: port 1(ltsp0) entering learning state [12188.535920] device ltsp1 entered promiscuous mode [12188.535964] br0: port 2(ltsp1) entering learning state [12188.541886] device ltsp2 entered promiscuous mode [12188.541928] br0: port 3(ltsp2) entering learning state [12188.550107] device ltsp3 entered promiscuous mode [12188.550151] br0: port 4(ltsp3) entering learning state [12188.571898] device ltsp4 entered promiscuous mode [12188.571941] br0: port 5(ltsp4) entering learning state [12197.272160] br0: no IPv6 routers present [12198.624132] ltsp2: no IPv6 routers present [12198.660135] ltsp1: no IPv6 routers present [12198.784045] ltsp0: no IPv6 routers present [12198.964020] ltsp3: no IPv6 routers present [12199.364037] ltsp4: no IPv6 routers present [12203.512111] br0: port 1(ltsp0) entering forwarding state [12203.532134] br0: port 2(ltsp1) entering forwarding state [12203.541059] br0: port 3(ltsp2) entering forwarding state [12203.549265] br0: port 4(ltsp3) entering forwarding state [12203.568041] br0: port 5(ltsp4) entering forwarding state ** Model information not available ** Loaded modules: Module Size Used by usbhid 27988 0 hid 50645 1 usbhid btrfs 366476 0 zlib_deflate 15822 1 btrfs crc32c 2172 1 libcrc32c 762 1 btrfs ufs 56158 0 qnx4 5118 0 hfsplus 61005 0 hfs 33093 0 minix 17814 0 ntfs 163917 0 vfat 6570 0 msdos 5118 0 fat 34912 2 vfat,msdos jfs 134648 0 xfs 417009 0 exportfs 2618 1 xfs reiserfs 176190 0 ext4 257739 0 jbd2 56155 1 ext4 ext2 46293 0 tun 8760 7 ip6table_filter 1908 0 ip6_tables 8560 1 ip6table_filter iptable_filter 1790 0 ip_tables 7690 1 iptable_filter x_tables 8327 2 ip6_tables,ip_tables parport_pc 15799 0 ppdev 4058 0 lp 5570 0 parport 22554 3 parport_pc,ppdev,lp sco 5857 2 bridge 32987 0 stp 996 1 bridge bnep 7444 2 rfcomm 25171 0 l2cap 21705 4 bnep,rfcomm crc16 1027 2 ext4,l2cap bluetooth 36319 6 sco,bnep,rfcomm,l2cap acpi_cpufreq 4943 0 cpufreq_stats 1940 0 cpufreq_powersave 602 0 cpufreq_conservative 4018 0 cpufreq_userspace 1480 0 kvm_intel 32824 0 kvm 182619 1 kvm_intel uinput 4796 1 fuse 43762 3 firewire_sbp2 9647 0 loop 9765 0 snd_hda_codec_idt 35281 1 snd_hda_intel 16787 0 snd_hda_codec 46002 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 4054 1 snd_hda_codec snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47214 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 3576 0 snd_rawmidi 12513 1 snd_seq_midi arc4 974 2 ecb 1405 2 snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 2 snd_pcm,snd_seq b43 132595 0 snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 6771 0 i915 221767 2 drm_kms_helper 18305 1 i915 snd 34363 11 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac80211 123266 1 b43 soundcore 3450 1 snd yenta_socket 16403 1 rsrc_nonstatic 7057 1 yenta_socket drm 112020 3 i915,drm_kms_helper psmouse 44657 0 snd_page_alloc 5045 2 snd_hda_intel,snd_pcm dell_laptop 1533 0 cfg80211 87625 2 b43,mac80211 i2c_i801 6462 0 i2c_algo_bit 3497 1 i915 serio_raw 2916 0 evdev 5609 15 rng_core 2178 1 b43 dcdbas 3892 1 dell_laptop video 14605 1 i915 i2c_core 12696 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit rfkill 10264 4 bluetooth,dell_laptop,cfg80211 output 1204 1 video battery 3782 0 processor 26671 3 acpi_cpufreq button 3598 1 i915 ac 1640 0 ext3 94204 5 jbd 32169 1 ext3 mbcache 3762 3 ext4,ext2,ext3 sha256_generic 10748 2 aes_i586 6816 2 aes_generic 25738 1 aes_i586 cbc 2047 1 dm_crypt 9127 1 dm_mod 46082 25 dm_crypt sd_mod 25869 3 crc_t10dif 1012 1 sd_mod ata_generic 2019 0 sdhci_pci 4525 0 sdhci 12147 1 sdhci_pci ata_piix 17736 2 ssb 33686 1 b43 tg3 88273 0 mmc_core 38491 3 b43,sdhci,ssb firewire_ohci 16509 0 libata 115721 2 ata_generic,ata_piix pcmcia 17442 2 b43,ssb uhci_hcd 16057 0 libphy 11638 1 tg3 led_class 1757 2 b43,sdhci firewire_core 31187 2 firewire_sbp2,firewire_ohci crc_itu_t 1035 1 firewire_core thermal 9206 0 thermal_sys 9378 3 video,processor,thermal ehci_hcd 27851 0 scsi_mod 101401 3 firewire_sbp2,sd_mod,libata pcmcia_core 20450 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia usbcore 98397 4 usbhid,uhci_hcd,ehci_hcd nls_base 4541 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Dell Device [1028:01d6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Device [1028:01d6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 44000000-441fffff Prefetchable memory behind bridge: 0000000044200000-00000000443fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: dfd00000-dfdfffff Prefetchable memory behind bridge: 0000000044400000-00000000445fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: dfc00000-dfcfffff Prefetchable memory behind bridge: 0000000044600000-00000000447fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01d6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: dfb00000-dfbfffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4) Subsystem: Dell Device [1028:01d6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at dfb00000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 48000000-4bfff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 02:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 09) (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:01d6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at dfbff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 02:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18) (prog-if 01) Subsystem: Dell Device [1028:01d6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin C routed to IRQ 18 Region 0: Memory at dfbff700 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Device [1028:01d6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: Dell Wireless 1390 WLAN Mini-Card [1028:0007] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfdfc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge Kernel modules: ssb ** USB devices: Bus 005 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable'), (102, 'unstable'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.1 tools for generating an initramfs ii linux-base 2.6.32-21 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-linux-free 2.6.32-21 Binary firmware for various driver ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-686 suggests: ii grub 0.97-61 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100906192732.gu28...@claws.fglan