On Wed, 2010-09-15 at 09:07 +0200, Christoph Kaminski wrote: > Package: linux-2.6 > Version: 2.6.32-21 > Severity: grave > Justification: renders package unusable > > If I boot this kernel with xen hypervisor (4.0.1 from sid) I see black screen > on first monitor and garbage on second after the load of the module. > > -- Package-specific info: > ** Version: > Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-21) ([email protected]) > (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 16:02:22 UTC 2010 > > ** Command line: > BOOT_IMAGE=/vmlinuz-2.6.32-5-xen-amd64 > root=/dev/mapper/sys-behemoth_neu--root ro quiet > > ** Tainted: P (1) > * Proprietary module has been loaded.
I'm afraid you have loaded a proprietary graphics driver which is not supported under this kernel and I suspect cannot work under Xen any way except by coincidence. If you can reproduce without fglrx please let us know. > > ** Kernel log: > [ 127.313353] [fglrx] Reserved FB block: Shared offset:0, size:1000000 > [ 127.313354] [fglrx] Reserved FB block: Unshared offset:fbfa000, > size:401000 > [ 127.313356] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 > [ 136.773041] CPU0 attaching NULL sched-domain. > [ 136.773044] CPU1 attaching NULL sched-domain. > [ 136.773045] CPU2 attaching NULL sched-domain. > [ 136.773047] CPU3 attaching NULL sched-domain. > [ 136.773048] CPU4 attaching NULL sched-domain. > [ 136.773049] CPU5 attaching NULL sched-domain. > [ 136.773050] CPU6 attaching NULL sched-domain. > [ 136.773051] CPU7 attaching NULL sched-domain. > [ 136.837192] CPU0 attaching sched-domain: > [ 136.837194] domain 0: span 0,4 level SIBLING > [ 136.837195] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) > [ 136.837199] domain 1: span 0-7 level MC > [ 136.837200] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 > (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 136.837206] CPU1 attaching sched-domain: > [ 136.837208] domain 0: span 1,5 level SIBLING > [ 136.837209] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) > [ 136.837212] domain 1: span 0-7 level MC > [ 136.837213] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 > (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 136.837219] CPU2 attaching sched-domain: > [ 136.837220] domain 0: span 2,6 level SIBLING > [ 136.837221] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) > [ 136.837224] domain 1: span 0-7 level MC > [ 136.837225] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 > (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 136.837231] CPU3 attaching sched-domain: > [ 136.837232] domain 0: span 3,7 level SIBLING > [ 136.837233] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) > [ 136.837236] domain 1: span 0-7 level MC > [ 136.837237] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 > (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 136.837243] CPU4 attaching sched-domain: > [ 136.837244] domain 0: span 0,4 level SIBLING > [ 136.837245] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) > [ 136.837248] domain 1: span 0-7 level MC > [ 136.837250] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 > (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 136.837255] CPU5 attaching sched-domain: > [ 136.837256] domain 0: span 1,5 level SIBLING > [ 136.837257] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) > [ 136.837260] domain 1: span 0-7 level MC > [ 136.837261] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 > (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 136.837267] CPU6 attaching sched-domain: > [ 136.837268] domain 0: span 2,6 level SIBLING > [ 136.837269] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) > [ 136.837272] domain 1: span 0-7 level MC > [ 136.837273] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 > (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 136.837279] CPU7 attaching sched-domain: > [ 136.837280] domain 0: span 3,7 level SIBLING > [ 136.837281] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) > [ 136.837284] domain 1: span 0-7 level MC > [ 136.837285] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 > (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 136.837892] CPU0 attaching NULL sched-domain. > [ 136.837894] CPU1 attaching NULL sched-domain. > [ 136.837895] CPU2 attaching NULL sched-domain. > [ 136.837896] CPU3 attaching NULL sched-domain. > [ 136.837897] CPU4 attaching NULL sched-domain. > [ 136.837898] CPU5 attaching NULL sched-domain. > [ 136.837900] CPU6 attaching NULL sched-domain. > [ 136.837901] CPU7 attaching NULL sched-domain. > [ 136.901211] CPU0 attaching sched-domain: > [ 136.901214] domain 0: span 0,4 level SIBLING > [ 136.901215] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) > [ 136.901219] domain 1: span 0-7 level MC > [ 136.901220] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 > (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 136.901226] CPU1 attaching sched-domain: > [ 136.901227] domain 0: span 1,5 level SIBLING > [ 136.901229] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) > [ 136.901232] domain 1: span 0-7 level MC > [ 136.901233] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 > (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 136.901238] CPU2 attaching sched-domain: > [ 136.901239] domain 0: span 2,6 level SIBLING > [ 136.901241] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) > [ 136.901244] domain 1: span 0-7 level MC > [ 136.901245] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 > (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 136.901250] CPU3 attaching sched-domain: > [ 136.901251] domain 0: span 3,7 level SIBLING > [ 136.901253] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) > [ 136.901256] domain 1: span 0-7 level MC > [ 136.901257] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 > (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 136.901262] CPU4 attaching sched-domain: > [ 136.901264] domain 0: span 0,4 level SIBLING > [ 136.901265] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) > [ 136.901268] domain 1: span 0-7 level MC > [ 136.901269] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 > (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 136.901275] CPU5 attaching sched-domain: > [ 136.901276] domain 0: span 1,5 level SIBLING > [ 136.901277] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) > [ 136.901280] domain 1: span 0-7 level MC > [ 136.901281] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 > (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 136.901286] CPU6 attaching sched-domain: > [ 136.901288] domain 0: span 2,6 level SIBLING > [ 136.901289] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) > [ 136.901292] domain 1: span 0-7 level MC > [ 136.901293] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 > (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 136.901298] CPU7 attaching sched-domain: > [ 136.901300] domain 0: span 3,7 level SIBLING > [ 136.901301] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) > [ 136.901304] domain 1: span 0-7 level MC > [ 136.901305] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 > (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 831.259195] CE: hpet increasing min_delta_ns to 15000 nsec > > ** Model information > sys_vendor: Dell Inc. > product_name: Precision WorkStation T3500 > product_version: > chassis_vendor: Dell Inc. > chassis_version: > bios_vendor: Dell Inc. > bios_version: A07 > board_vendor: Dell Inc. > board_name: 0XPDFK > board_version: A01 > > ** Loaded modules: > Module Size Used by > tun 10892 2 > radeon 572779 0 > ttm 40034 1 radeon > drm_kms_helper 20065 1 radeon > drm 143553 3 radeon,ttm,drm_kms_helper > i2c_algo_bit 4225 1 radeon > sco 7209 2 > rfcomm 29597 0 > bnep 9459 2 > l2cap 24736 6 rfcomm,bnep > crc16 1319 1 l2cap > bluetooth 41827 6 sco,rfcomm,bnep,l2cap > rfkill 13028 2 bluetooth > binfmt_misc 6431 1 > fuse 50206 1 > bridge 39630 0 > stp 1440 1 bridge > coretemp 4325 0 > loop 11799 0 > snd_hda_codec_analog 64562 1 > snd_hda_intel 19987 1 > snd_hda_codec 54244 2 snd_hda_codec_analog,snd_hda_intel > snd_pcsp 6579 1 > snd_hwdep 5380 1 snd_hda_codec > snd_pcm_oss 32591 0 > snd_mixer_oss 12606 1 snd_pcm_oss > snd_pcm 60519 4 > snd_hda_intel,snd_hda_codec,snd_pcsp,snd_pcm_oss > snd_timer 15582 1 snd_pcm > snd 46446 13 > snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_pcsp,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > soundcore 4598 1 snd > i2c_i801 7830 0 > parport_pc 18855 0 > snd_page_alloc 6249 2 snd_hda_intel,snd_pcm > evdev 7352 11 > dcdbas 5048 0 > fglrx 2368640 46 > button 4650 0 > wmi 4323 0 > i2c_core 15712 5 > radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 > parport 27954 1 parport_pc > processor 36149 8 > psmouse 49777 0 > acpi_processor 5087 1 processor,[permanent] > serio_raw 3752 0 > ext3 106502 2 > jbd 37085 1 ext3 > mbcache 5050 1 ext3 > dm_mod 53770 25 > sg 18760 0 > sd_mod 29761 3 > sr_mod 12602 0 > crc_t10dif 1276 1 sd_mod > cdrom 29415 1 sr_mod > usbhid 33260 0 > hid 62857 1 usbhid > ata_generic 2983 0 > uhci_hcd 18521 0 > ata_piix 21124 3 > tg3 95727 0 > libphy 14038 1 tg3 > libata 133568 2 ata_generic,ata_piix > ehci_hcd 31135 0 > scsi_mod 122101 4 sg,sd_mod,sr_mod,libata > thermal 11674 0 > usbcore 121938 4 usbhid,uhci_hcd,ehci_hcd > nls_base 6377 1 usbcore > thermal_sys 11942 2 processor,thermal > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI > Port [8086:3405] (rev 13) > Subsystem: Dell Device [1028:0293] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 11 > Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit- > Address: 00000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 > <512ns, L1 <4us > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ > DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- > EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 > Len=00c <?> > > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Memory behind bridge: f7b00000-f7bfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: Dell Device [1028:0293] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- > Address: fee00000 Data: 4059 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 > <512ns, L1 <4us > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #1, PowerLimit 25.000W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Off, PwrInd Off, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet+ LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- > EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 > Len=00c <?> > Kernel driver in use: pcieport > > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: f7d00000-f7efffff > Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: Dell Device [1028:0293] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- > Address: fee00000 Data: 4061 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency > L0 <512ns, L1 <4us > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive+ BWMgmt- ABWMgmt+ > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #2, PowerLimit 150.000W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Off, PwrInd Off, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- > EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 > Len=00c <?> > Kernel driver in use: pcieport > > 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > Memory behind bridge: f7c00000-f7cfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: Dell Device [1028:0293] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit- > Address: fee00000 Data: 4069 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency > L0 <512ns, L1 <4us > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #4, PowerLimit 75.000W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Off, PwrInd Off, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet+ LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- > EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 > Len=00c <?> > Kernel driver in use: pcieport > > 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management > Registers [8086:342e] (rev 13) (prog-if 00 [8259]) > Subsystem: Device [0028:0093] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 > unlimited, L1 unlimited > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > > 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch > Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) > Subsystem: Device [0028:0093] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 > unlimited, L1 unlimited > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > > 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status > and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) > Subsystem: Device [0028:0093] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 > unlimited, L1 unlimited > ClockPM- Surprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > > 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB > UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 4: I/O ports at ff20 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB > UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 4: I/O ports at ff00 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB > UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 22 > Region 4: I/O ports at fc00 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 > EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 22 > Region 0: Memory at f7ffa000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ehci_hcd > > 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD > Audio Controller [8086:3a3e] > Subsystem: Dell Device [1028:0293] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f7ffc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE- FLReset+ > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency > L0 <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > Status: NegoPending- InProgress- > Capabilities: [130 v1] Root Complex Link > Desc: PortNumber=0f ComponentID=00 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000feda8000 > Kernel driver in use: HDA Intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI > Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: f0000000-f01fffff > Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 > <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ > Surprise+ > Slot #3, PowerLimit 25.000W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee00000 Data: 4071 > Capabilities: [90] Subsystem: Dell Device [1028:0293] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=01 ComponentID=00 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000feda8000 > Kernel driver in use: pcieport > > 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI > Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > Memory behind bridge: f7a00000-f7afffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee00000 Data: 4079 > Capabilities: [90] Subsystem: Dell Device [1028:0293] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=06 ComponentID=00 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000feda8000 > Kernel driver in use: pcieport > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB > UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at ff80 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB > UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 4: I/O ports at ff60 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB > UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at ff40 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 > EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) > Subsystem: Dell Device [1028:0293] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ehci_hcd > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] > (rev 90) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Dell Device [1028:0293] > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface > Controller [8086:3a16] > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=0c <?> > > 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port > SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 20 > Region 0: I/O ports at fe00 [size=8] > Region 1: I/O ports at fe10 [size=4] > Region 2: I/O ports at fe20 [size=8] > Region 3: I/O ports at fe30 [size=4] > Region 4: I/O ports at fec0 [size=16] > Region 5: I/O ports at ecc0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ata_piix > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus > Controller [8086:3a30] > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 20 > Region 0: Memory at f7ffb000 (64-bit, non-prefetchable) [size=256] > Region 4: I/O ports at ece0 [size=32] > Kernel driver in use: i801_smbus > > 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port > SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) > Subsystem: Dell Device [1028:0293] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 20 > Region 0: I/O ports at fe40 [size=8] > Region 1: I/O ports at fe50 [size=4] > Region 2: I/O ports at fe60 [size=8] > Region 3: I/O ports at fe70 [size=4] > Region 4: I/O ports at fed0 [size=16] > Region 5: I/O ports at ecd0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ata_piix > > 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 [FirePro > 2260] [1002:95cf] (prog-if 00 [VGA controller]) > Subsystem: ATI Technologies Inc Device [1002:2143] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 54 > Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] > Region 2: Memory at f7df0000 (64-bit, non-prefetchable) [size=64K] > Region 4: I/O ports at dc00 [size=256] > Expansion ROM at f7e00000 [disabled] [size=128K] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 > unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency > L0 <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee00000 Data: 40b1 > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Kernel driver in use: fglrx_pci > > 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 > Gigabit Ethernet PCIe [14e4:1681] (rev 10) > Subsystem: Dell Device [1028:0293] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 53 > Region 0: Memory at f7ae0000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at f7af0000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [48] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [40] Vital Product Data > Product Name: Broadcom NetXtreme Gigabit Ethernet Controller > Read-only fields: > [PN] Part number: BCM95761 > [EC] Engineering changes: 106679-15 > [SN] Serial number: 0123456789 > [MN] Manufacture ID: 31 34 65 34 > [RV] Reserved: checksum good, 28 byte(s) reserved > Read/write fields: > [YA] Asset tag: XYZ01234567 > [RW] Read-write area: 107 byte(s) free > End > Capabilities: [60] Vendor Specific Information: Len=6c <?> > Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee00000 Data: 40a9 > Capabilities: [cc] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 > unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <1us, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [13c v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 00-26-b9-ff-fe-8e-72-49 > Capabilities: [16c v1] Power Budgeting <?> > Kernel driver in use: tg3 > > > ** USB devices: > Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 003: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard > Bus 003 Device 002: ID 0461:4d22 Primax Electronics, Ltd > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: squeeze/sid > APT prefers testing > APT policy: (500, 'testing'), (51, 'unstable') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/8 CPU cores) > Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) (ignored: LC_ALL > set to en_US.utf8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-2.6.32-5-xen-amd64 depends on: > ii debconf [debconf-2.0] 1.5.35 Debian configuration management > sy > ii initramfs-tools 0.98.2 tools for generating an initramfs > ii linux-base 2.6.32-21 Linux image base package > ii module-init-tools 3.12-1 tools for managing Linux kernel > mo > > Versions of packages linux-image-2.6.32-5-xen-amd64 recommends: > ii firmware-linux-free 2.6.32-21 Binary firmware for various > driver > > Versions of packages linux-image-2.6.32-5-xen-amd64 suggests: > ii grub 0.97-63 GRand Unified Bootloader (dummy > pa > pn linux-doc-2.6.32 <none> (no description available) > > Versions of packages linux-image-2.6.32-5-xen-amd64 is related to: > pn firmware-bnx2 <none> (no description available) > pn firmware-bnx2x <none> (no description available) > pn firmware-ipw2x00 <none> (no description available) > pn firmware-ivtv <none> (no description available) > pn firmware-iwlwifi <none> (no description available) > pn firmware-linux <none> (no description available) > ii firmware-linux-nonfree 0.26 Binary firmware for various > driver > pn firmware-qlogic <none> (no description available) > pn firmware-ralink <none> (no description available) > ii xen-hypervisor-4.0-amd64 [xen 4.0.1-1 The Xen Hypervisor on AMD64 > > -- debconf information: > > linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64: > > linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: > true > > linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: > false > * linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64: > > > -- Ian Campbell Never give an inch! -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
