Package: linux-2.6 Version: 2.6.32-30 Severity: important
Hello, I have some issues when I use a little script for backup DomU with lvcreate "snapshot" functionnality. The script works "perfectly" with kernel 2.6.26 (from Lenny/Stable) Similary issue report here: http://xen.1045712.n5.nabble.com/kernel-BUG-at-arch-x86-xen-mmu-c-1860-td3318567.html#a3339844 Bye! -- Package-specific info: ** Version: Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-30) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 05:46:49 UTC 2011 ** Command line: root=/dev/mapper/vgraid1-xen64 ro console=tty0 xencons=off ** Not tainted ** Kernel log: [196102.732618] ------------[ cut here ]------------ [196102.733010] kernel BUG at /build/buildd-linux-2.6_2.6.32-29-amd64-xcs37n/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/mmu.c:1649! [196102.733010] invalid opcode: 0000 [#1] SMP [196102.733010] last sysfs file: /sys/devices/virtual/bdi/253:31/uevent [196102.733010] CPU 1 [196102.733010] Modules linked in: dm_snapshot nfs lockd fscache nfs_acl auth_rpcgss sunrpc nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_physdev iptable_filter ip_tables x_tables xen_evtchn xenfs bridge stp coretemp it87 hwmon_vid fuse loop i915 drm_kms_helper processor acpi_processor drm snd_pcsp usbhid i2c_algo_bit button video hid i2c_i801 snd_pcm i2c_core serio_raw snd_timer evdev output rng_core snd soundcore snd_page_alloc ext3 jbd mbcache dm_mod raid1 md_mod sg sr_mod cdrom sd_mod crc_t10dif ata_generic ata_piix libata ehci_hcd uhci_hcd scsi_mod usbcore nls_base r8169 mii thermal fan thermal_sys [last unloaded: scsi_wait_scan] [196102.733010] Pid: 23144, comm: dmsetup_env Not tainted 2.6.32-5-xen-amd64 #1 945GM-S2 [196102.733010] RIP: e030:[<ffffffff8100c694>] [<ffffffff8100c694>] pin_pagetable_pfn+0x2d/0x36 [196102.733010] RSP: e02b:ffff880022c81e08 EFLAGS: 00010282 [196102.733010] RAX: 00000000ffffffea RBX: 000000000002dee2 RCX: 0000000000000001 [196102.733010] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880022c81e08 [196102.733010] RBP: ffff8800284a3b80 R08: 0000000000000710 R09: ffffea0000a0c170 [196102.733010] R10: 0000000000007ff0 R11: ffff880000000968 R12: ffff8800286dd8a8 [196102.733010] R13: ffff880022c09228 R14: ffff88002f20b880 R15: ffff8800286dd8a8 [196102.733010] FS: 00007f07e332d700(0000) GS:ffff88000310c000(0000) knlGS:0000000000000000 [196102.733010] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [196102.733010] CR2: 00007f07e2a0d876 CR3: 0000000022c05000 CR4: 0000000000002660 [196102.733010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [196102.733010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [196102.733010] Process dmsetup_env (pid: 23144, threadinfo ffff880022c80000, task ffff88002f20b880) [196102.733010] Stack: [196102.733010] 0000000000000000 000000000008f210 ffffea0000a0c170 000000000002dee2 [196102.733010] <0> ffff8800284a3b80 ffffffff810cd4a1 ffff880022c070f8 00007f07e2a0d876 [196102.733010] <0> 0000000022c07000 ffffffff810cb34c ffff880022c09228 00007f07e2a0d876 [196102.733010] Call Trace: [196102.733010] [<ffffffff810cd4a1>] ? __pte_alloc+0x6b/0xc6 [196102.733010] [<ffffffff810cb34c>] ? pmd_alloc+0x28/0x5b [196102.733010] [<ffffffff810cd5ca>] ? handle_mm_fault+0xce/0x80f [196102.733010] [<ffffffff8130cc35>] ? page_fault+0x25/0x30 [196102.733010] [<ffffffff8130ce6a>] ? error_exit+0x2a/0x60 [196102.733010] [<ffffffff8101251d>] ? retint_restore_args+0x5/0x6 [196102.733010] [<ffffffff8130ed96>] ? do_page_fault+0x2e0/0x2fc [196102.733010] [<ffffffff8130cc35>] ? page_fault+0x25/0x30 [196102.733010] Code: ec 28 89 3c 24 48 89 f7 e8 a2 fd ff ff 48 89 e7 48 89 44 24 08 be 01 00 00 00 31 d2 41 ba f0 7f 00 00 e8 b0 cc ff ff 85 c0 74 04 <0f> 0b eb fe 48 83 c4 28 c3 55 49 89 ca 48 89 d5 40 88 f1 48 89 [196102.733010] RIP [<ffffffff8100c694>] pin_pagetable_pfn+0x2d/0x36 [196102.733010] RSP <ffff880022c81e08> [196102.733010] ---[ end trace a243e2d8d80fd0b9 ]--- ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: 945GM-S2 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: FC board_vendor: Gigabyte Technology Co., Ltd. board_name: 945GM-S2 board_version: x.x ** Loaded modules: Module Size Used by nfs 241066 1 lockd 57603 1 nfs fscache 29834 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33476 1 nfs sunrpc 161525 11 nfs,lockd,nfs_acl,auth_rpcgss nf_conntrack_ipv4 9833 9 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 xt_state 1303 9 nf_conntrack 46519 2 nf_conntrack_ipv4,xt_state xt_physdev 1508 18 iptable_filter 2258 1 ip_tables 13899 1 iptable_filter x_tables 12845 3 xt_state,xt_physdev,ip_tables xen_evtchn 4339 10 xenfs 9600 1 bridge 39662 0 stp 1440 1 bridge coretemp 4325 0 it87 15879 0 hwmon_vid 1828 1 it87 fuse 50625 1 loop 11799 0 i915 255294 0 snd_pcsp 6579 0 drm_kms_helper 20065 1 i915 processor 35941 0 acpi_processor 5087 1 processor,[permanent] usbhid 33276 0 snd_pcm 60551 1 snd_pcsp drm 143361 2 i915,drm_kms_helper hid 63225 1 usbhid i2c_algo_bit 4225 1 i915 snd_timer 15582 1 snd_pcm button 4650 1 i915 video 17445 1 i915 i2c_i801 7830 0 rng_core 3006 0 snd 46446 3 snd_pcsp,snd_pcm,snd_timer soundcore 4598 1 snd evdev 7352 0 serio_raw 3752 0 i2c_core 15712 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 snd_page_alloc 6249 1 snd_pcm output 1692 1 video ext3 106502 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53754 81 raid1 18431 2 md_mod 73808 3 raid1 fan 3346 0 sg 18760 0 sr_mod 12602 0 cdrom 29415 1 sr_mod sd_mod 29873 9 crc_t10dif 1276 1 sd_mod ata_generic 3047 0 ata_piix 21124 6 libata 133632 2 ata_generic,ata_piix ehci_hcd 31151 0 r8169 29261 0 uhci_hcd 18521 0 thermal 11674 0 mii 3210 1 r8169 thermal_sys 11942 4 processor,video,fan,thermal scsi_mod 122133 4 sg,sr_mod,sd_mod,libata usbcore 122034 35 usbhid,ehci_hcd,uhci_hcd nls_base 6377 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at c000 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at e4080000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> Kernel modules: i915 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: 30000000-301fffff Prefetchable memory behind bridge: 0000000030200000-00000000303fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: 0000000030400000-00000000305fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at bc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e40c0000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e2000000-e3ffffff Prefetchable memory behind bridge: 0000000030600000-00000000306fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:b001] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f000 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d400 [size=8] Region 1: I/O ports at d800 [size=4] Region 2: I/O ports at dc00 [size=8] Region 3: I/O ports at e000 [size=4] Region 4: I/O ports at e400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 751 Region 0: I/O ports at 9000 [size=256] Region 2: Memory at e1000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 30400000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 Ethernet controller [0200]: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [1186:4300] (rev 10) Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [1186:4300] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at a000 [size=256] Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 30600000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 ** USB devices: Bus 004 Device 002: ID 0463:ffff MGE UPS Systems UPS Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.8 APT prefers stable APT policy: (990, 'stable'), (200, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-5-xen-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools 0.92o tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-xen-amd64 recommends: ii firmware-linux-free 2.6.32-30 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-xen-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-xen-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) ii xen-hypervisor-4.0-amd64 [xen 4.0.1-1 The Xen Hypervisor on AMD64 -- debconf information: linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64: linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20110122193503.11849.28244.reportbug@xencave.thierry-jaouen.local
