Package: linux-2.6 Version: 2.6.37-1~experimental.1 Severity: normal Tags: upstream
Using the USB Hauppauge WinTV-HVR 900 (version B2C0) TV card mostly works ok. But when the device is disconnected from the USB-bus it reproducably triggers a kernel oops. The error happens at [35045.833703] BUG: unable to handle kernel NULL pointer dereference at 0000000000000298 [35045.833711] IP: [<ffffffffa01f30b8>] ir_close+0x10/0x22 [ir_core] See the attached log file for the full trace. -- Package-specific info: ** Version: Linux version 2.6.37-trunk-amd64 (Debian 2.6.37-1~experimental.1) ([email protected]) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Thu Jan 6 14:13:28 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.37-trunk-amd64 root=/dev/mapper/vg0-debroot ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ 35.624845] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 35.660672] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 35.688549] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 35.691686] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 35.725774] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 36.545346] fuse init (API version 7.15) [ 36.935013] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [ 36.990707] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [ 36.991981] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.025886] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6 [ 38.449099] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 38.449103] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 38.449858] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.973676] Bluetooth: Core ver 2.15 [ 41.973684] NET: Registered protocol family 31 [ 41.973685] Bluetooth: HCI device and connection manager initialized [ 41.973686] Bluetooth: HCI socket layer initialized [ 42.065014] Bluetooth: L2CAP ver 2.15 [ 42.065016] Bluetooth: L2CAP socket layer initialized [ 42.067921] Bluetooth: RFCOMM TTY layer initialized [ 42.067924] Bluetooth: RFCOMM socket layer initialized [ 42.067925] Bluetooth: RFCOMM ver 1.11 [ 42.119809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 42.119811] Bluetooth: BNEP filters: protocol multicast [ 42.139828] input: G15 Extra Keys as /devices/virtual/input/input7 [ 42.426163] Bluetooth: SCO (Voice Link) ver 0.6 [ 42.426165] Bluetooth: SCO socket layer initialized [ 42.939086] lp: driver loaded but no devices found [ 43.057980] ppdev: user-space parallel port driver [ 44.075141] pcieport 0000:00:03.0: AER: Corrected error received: id=0018 [ 44.075146] pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID) [ 44.075148] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00001000/00002000 [ 44.075150] pcieport 0000:00:03.0: [12] Replay Timer Timeout [ 49.250076] eth0: no IPv6 routers present [ 49.805106] usb 2-1.8: new high speed USB device using ehci_hcd and address 6 [ 49.917385] usb 2-1.8: New USB device found, idVendor=0c0b, idProduct=b159 [ 49.917390] usb 2-1.8: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.917395] usb 2-1.8: Product: DataStation maxi m.u [ 49.917398] usb 2-1.8: Manufacturer: Trekstor [ 49.917401] usb 2-1.8: SerialNumber: 00011405 [ 49.919380] usb 2-1.8: selecting invalid altsetting 1 [ 49.919747] scsi6 : usb-storage 2-1.8:1.0 [ 52.085688] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 [ 52.146899] EXT4-fs (sda1): re-mounted. Opts: commit=0 [ 52.148292] EXT4-fs (dm-6): re-mounted. Opts: commit=0 [ 52.150047] EXT4-fs (dm-2): re-mounted. Opts: commit=0 [ 52.151796] EXT4-fs (dm-3): re-mounted. Opts: commit=0 [ 52.330603] EXT4-fs (dm-5): re-mounted. Opts: commit=0 [ 53.154151] CE: hpet4 increased min_delta_ns to 7500 nsec [ 53.154162] CE: hpet4 increased min_delta_ns to 11250 nsec [ 53.523674] EXT4-fs (dm-7): re-mounted. Opts: commit=0 [ 54.762923] CE: hpet2 increased min_delta_ns to 7500 nsec [ 54.762935] CE: hpet2 increased min_delta_ns to 11250 nsec [ 55.042553] CE: hpet increased min_delta_ns to 20113 nsec [ 71.916775] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6 [ 72.702908] CE: hpet5 increased min_delta_ns to 7500 nsec [ 72.702919] CE: hpet5 increased min_delta_ns to 11250 nsec [ 92.866607] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6 [ 113.816645] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6 [ 114.939390] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 121.956035] CE: hpet6 increased min_delta_ns to 7500 nsec [ 121.956047] CE: hpet6 increased min_delta_ns to 11250 nsec [ 134.766515] usb 2-1.8: reset high speed USB device using ehci_hcd and address 6 [ 196.649620] usb 2-1.8: USB disconnect, address 6 [ 199.400834] usb 2-1.8: new high speed USB device using ehci_hcd and address 7 [ 199.513135] usb 2-1.8: New USB device found, idVendor=0c0b, idProduct=b159 [ 199.513141] usb 2-1.8: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 199.513145] usb 2-1.8: Product: DataStation maxi m.u [ 199.513149] usb 2-1.8: Manufacturer: Trekstor [ 199.513152] usb 2-1.8: SerialNumber: 00011405 [ 199.515145] usb 2-1.8: selecting invalid altsetting 1 [ 199.515253] scsi7 : usb-storage 2-1.8:1.0 [ 221.632174] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7 [ 242.582221] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7 [ 263.599995] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7 [ 284.545864] usb 2-1.8: reset high speed USB device using ehci_hcd and address 7 [ 296.553365] usb 2-1.8: USB disconnect, address 7 [ 468.963605] usb 2-1.8: new high speed USB device using ehci_hcd and address 8 [ 469.075919] usb 2-1.8: New USB device found, idVendor=0c0b, idProduct=b159 [ 469.075925] usb 2-1.8: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 469.075929] usb 2-1.8: Product: DataStation maxi m.u [ 469.075933] usb 2-1.8: Manufacturer: Trekstor [ 469.075936] usb 2-1.8: SerialNumber: 00011405 [ 469.077646] usb 2-1.8: selecting invalid altsetting 1 [ 469.077770] scsi8 : usb-storage 2-1.8:1.0 [ 470.097286] scsi 8:0:0:0: Direct-Access SAMSUNG HD501LJ PQ: 0 ANSI: 2 [ 470.098442] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 470.099171] sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 470.101783] sd 8:0:0:0: [sdf] Write Protect is off [ 470.101791] sd 8:0:0:0: [sdf] Mode Sense: 38 00 00 00 [ 470.101796] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 470.105147] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 470.116319] sdf: sdf1 [ 470.119736] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 470.119740] sd 8:0:0:0: [sdf] Attached SCSI disk [ 470.895270] REISERFS (device sdf1): found reiserfs format "3.6" with standard journal [ 470.895286] REISERFS (device sdf1): using ordered data mode [ 470.904866] REISERFS (device sdf1): journal params: device sdf1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 470.905266] REISERFS (device sdf1): checking transaction log (sdf1) [ 470.958954] REISERFS (device sdf1): Using r5 hash to sort names ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: Intel Corp. bios_version: WBIBX10J.86A.0122.2009.0802.2219 board_vendor: Intel Corporation board_name: DP55WB board_version: AAE64798-204 ** Loaded modules: Module Size Used by reiserfs 194515 1 parport_pc 18869 0 ppdev 5139 0 lp 7966 0 parport 25742 3 parport_pc,ppdev,lp sco 7563 2 bnep 9960 2 rfcomm 28534 0 l2cap 30438 6 bnep,rfcomm bluetooth 44517 6 sco,bnep,rfcomm,l2cap rfkill 13886 3 bluetooth fuse 54779 1 acpi_cpufreq 5351 0 mperf 1259 1 acpi_cpufreq adt7475 16382 0 hwmon_vid 1820 1 adt7475 loop 13835 0 firewire_sbp2 11535 0 snd_usb_audio 75158 1 snd_pcm 61869 1 snd_usb_audio snd_page_alloc 6321 1 snd_pcm snd_hwdep 5484 1 snd_usb_audio snd_usbmidi_lib 15618 1 snd_usb_audio snd_seq_midi 4486 0 snd_seq_midi_event 4786 1 snd_seq_midi snd_rawmidi 15945 2 snd_usbmidi_lib,snd_seq_midi snd_seq 42518 2 snd_seq_midi,snd_seq_midi_event snd_timer 16304 2 snd_pcm,snd_seq snd_seq_device 4531 3 snd_seq_midi,snd_rawmidi,snd_seq snd 47164 10 snd_usb_audio,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4614 1 snd nvidia 10019555 38 tpm_tis 7141 0 tpm 9907 1 tpm_tis uinput 6942 2 evdev 8115 14 tpm_bios 4709 1 tpm processor 25140 9 acpi_cpufreq button 4722 0 pcspkr 1739 0 thermal_sys 11764 1 processor i2c_i801 7318 0 i2c_core 16458 3 adt7475,nvidia,i2c_i801 ext4 279593 7 mbcache 5104 1 ext4 jbd2 57995 1 ext4 crc16 1327 2 l2cap,ext4 dm_mod 56131 22 usb_storage 39639 1 uas 6917 0 sg 19095 0 sr_mod 12759 0 sd_mod 28370 6 cdrom 29865 1 sr_mod crc_t10dif 1300 1 sd_mod usbhid 30874 0 hid 65142 1 usbhid ata_generic 3151 0 ata_piix 20999 4 firewire_ohci 22186 0 e1000e 117358 0 libata 143334 2 ata_generic,ata_piix scsi_mod 154687 7 firewire_sbp2,usb_storage,uas,sg,sr_mod,sd_mod,libata firewire_core 42353 2 firewire_sbp2,firewire_ohci ehci_hcd 31486 0 usbcore 118919 8 snd_usb_audio,snd_usbmidi_lib,usb_storage,uas,usbhid,ehci_hcd crc_itu_t 1331 1 firewire_core nls_base 6369 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: e2000000-e30fffff Prefetchable memory behind bridge: 00000000d0000000-00000000e1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:19.0 Ethernet controller [0200]: Intel Corporation 82578DC Gigabit Network Connection [8086:10f0] (rev 05) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at e3200000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at e3224000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 2020 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:4257] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e3225400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: Intel Corporation Device [8086:0034] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3220000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: e3300000-e34fffff Prefetchable memory behind bridge: 00000000e3500000-00000000e36fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: e3700000-e38fffff Prefetchable memory behind bridge: 00000000e3900000-00000000e3afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: e3b00000-e3cfffff Prefetchable memory behind bridge: 00000000e3d00000-00000000e3efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:4257] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e3225000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: e3100000-e31fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 05) Subsystem: Intel Corporation Device [8086:4257] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device [8086:4257] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 2098 [size=8] Region 1: I/O ports at 20ac [size=4] Region 2: I/O ports at 2090 [size=8] Region 3: I/O ports at 20a8 [size=4] Region 4: I/O ports at 2070 [size=16] Region 5: I/O ports at 2060 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: Intel Corporation Device [8086:4257] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at e3225800 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 2000 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 05) (prog-if 85 [Master SecO PriO]) Subsystem: Intel Corporation Device [8086:4257] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 2088 [size=8] Region 1: I/O ports at 20a4 [size=4] Region 2: I/O ports at 2080 [size=8] Region 3: I/O ports at 20a0 [size=4] Region 4: I/O ports at 2050 [size=16] Region 5: I/O ports at 2040 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Device [1acc:27d3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 1000 [size=128] [virtual] Expansion ROM at e3080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be3] (rev a1) Subsystem: Device [1acc:27d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: Intel Corporation Device [8086:4257] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at e3104000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e3100000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 046d:0a07 Logitech, Inc. Bus 001 Device 004: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer Bus 002 Device 004: ID 0409:005a NEC Corp. HighSpeed Hub Bus 002 Device 008: ID 0c0b:b159 Dura Micro, Inc. (Acomdata) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.37-trunk-amd64 (SMP w/8 CPU cores) Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.37-trunk-amd64 depends on: ii debconf [debconf 1.5.38 Debian configuration management sy ii initramfs-tools 0.98.8 tools for generating an initramfs ii linux-base 2.6.37-1~experimental.1 Linux image base package ii module-init-tool 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.37-trunk-amd64 recommends: ii firmware-linux-f 2.6.37-1~experimental.1 Binary firmware for various driver Versions of packages linux-image-2.6.37-trunk-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.37 <none> (no description available) Versions of packages linux-image-2.6.37-trunk-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.37-trunk-amd64/prerm/removing-running-kernel-2.6.37-trunk-amd64: true linux-image-2.6.37-trunk-amd64/postinst/missing-firmware-2.6.37-trunk-amd64: linux-image-2.6.37-trunk-amd64/postinst/depmod-error-initrd-2.6.37-trunk-amd64: false linux-image-2.6.37-trunk-amd64/postinst/ignoring-do-bootloader-2.6.37-trunk-amd64:
USB Connect: [35021.229842] usb 2-1.8: new high speed USB device using ehci_hcd and address 5 [35021.326716] usb 2-1.8: New USB device found, idVendor=2040, idProduct=6502 [35021.326721] usb 2-1.8: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [35021.326726] usb 2-1.8: Product: WinTV HVR-900 [35021.326729] usb 2-1.8: SerialNumber: 4028600665 [35021.448955] IR NEC protocol handler initialized [35021.489833] Linux video capture interface: v2.00 [35021.538232] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [35021.538299] em28xx #0: chip ID is em2882/em2883 [35021.555721] IR RC5(x) protocol handler initialized [35021.558324] IR RC6 protocol handler initialized [35021.565930] IR JVC protocol handler initialized [35021.568427] IR Sony protocol handler initialized [35021.572472] lirc_dev: IR Remote Control driver registered, major 250 [35021.581454] IR LIRC bridge handler initialized [35021.711590] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [35021.711603] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [35021.711614] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [35021.711625] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [35021.711636] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [35021.711647] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [35021.711657] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [35021.711668] em28xx #0: i2c eeprom 70: 32 00 38 00 36 00 30 00 30 00 36 00 36 00 35 00 [35021.711678] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [35021.711689] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [35021.711700] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [35021.711710] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 59 91 [35021.711721] em28xx #0: i2c eeprom c0: 1f f0 74 02 01 00 01 79 41 00 00 00 00 00 00 00 [35021.711732] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [35021.711742] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 59 91 [35021.711753] em28xx #0: i2c eeprom f0: 1f f0 74 02 01 00 01 79 41 00 00 00 00 00 00 00 [35021.711766] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xed3f3ddd [35021.711769] em28xx #0: EEPROM info: [35021.711771] em28xx #0: AC97 audio (5 sample rates) [35021.711774] em28xx #0: 500mA max power [35021.711777] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [35021.712973] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [35021.714481] tveeprom 8-0050: Hauppauge model 65018, rev B2C0, serial# 2068825 [35021.714486] tveeprom 8-0050: tuner model is Xceive XC3028 (idx 120, type 71) [35021.714492] tveeprom 8-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [35021.714496] tveeprom 8-0050: audio processor is None (idx 0) [35021.714500] tveeprom 8-0050: has radio [35021.727606] tvp5150 8-005c: chip found @ 0xb8 (em28xx #0) [35021.741960] tuner 8-0061: chip found @ 0xc2 (em28xx #0) [35021.778578] xc2028 8-0061: creating new instance [35021.778580] xc2028 8-0061: type set to XCeive xc2028/xc3028 tuner [35021.814541] xc2028 8-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [35021.860488] xc2028 8-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [35022.752329] xc2028 8-0061: Loading firmware for type=MTS (4), id 000000000000b700. [35022.766682] xc2028 8-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [35022.926307] Registered IR keymap rc-hauppauge-new [35022.926394] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/rc/rc0/input8 [35022.926461] rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/rc/rc0 [35022.926871] em28xx #0: Config register raw data: 0xd0 [35022.927617] em28xx #0: AC97 vendor ID = 0xffffffff [35022.928121] em28xx #0: AC97 features = 0x6a90 [35022.928123] em28xx #0: Empia 202 AC97 audio processor detected [35023.062493] tvp5150 8-005c: tvp5150am1 detected. [35023.158559] em28xx #0: v4l2 driver version 0.1.2 [35023.205703] xc2028 8-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [35024.101792] MTS (4), id 00000000000000ff: [35024.101796] xc2028 8-0061: Loading firmware for type=MTS (4), id 0000000100000007. [35024.318948] em28xx #0: V4L2 video device registered as video0 [35024.318950] em28xx #0: V4L2 VBI device registered as vbi0 [35024.319462] usbcore: registered new interface driver em28xx [35024.319464] em28xx driver loaded [35024.348815] em28xx-audio.c: probing for em28x1 non standard usbaudio [35024.348817] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [35024.348934] Em28xx: Initialized (Em28xx Audio Extension) extension [35024.448160] tvp5150 8-005c: tvp5150am1 detected. USB Disconnect: [35045.818347] usb 2-1.8: USB disconnect, address 5 [35045.818445] em28xx #0: disconnecting em28xx #0 video [35045.833703] BUG: unable to handle kernel NULL pointer dereference at 0000000000000298 [35045.833711] IP: [<ffffffffa01f30b8>] ir_close+0x10/0x22 [ir_core] [35045.833722] PGD 0 [35045.833727] Oops: 0000 [#1] SMP [35045.833732] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq [35045.833737] CPU 2 [35045.833740] Modules linked in: em28xx_alsa rc_hauppauge_new tuner_xc2028 tuner tvp5150 ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder em28xx v4l2_common videodev v4l1_compat ir_nec_decoder v4l2_compat_ioctl32 ir_core videobuf_vmalloc videobuf_core tveeprom parport_pc ppdev lp parport sco bnep rfcomm l2cap bluetooth rfkill fuse acpi_cpufreq mperf adt7475 hwmon_vid loop firewire_sbp2 snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore nvidia(P) uinput processor i2c_i801 button thermal_sys i2c_core tpm_tis tpm tpm_bios pcspkr evdev ext4 mbcache jbd2 crc16 dm_mod usb_storage uas sg sd_mod sr_mod cdrom crc_t10dif usbhid hid ata_generic ata_piix libata firewire_ohci firewire_core scsi_mod e1000e ehci_hcd usbcore crc_itu_t nls_base [last unloaded: scsi_wait_scan] [35045.833851] [35045.833856] Pid: 190, comm: khubd Tainted: P 2.6.37-trunk-amd64 #1 DP55WB/ [35045.833860] RIP: 0010:[<ffffffffa01f30b8>] [<ffffffffa01f30b8>] ir_close+0x10/0x22 [ir_core] [35045.833869] RSP: 0018:ffff8802246d3b60 EFLAGS: 00010282 [35045.833872] RAX: 0000000000000000 RBX: ffff880224e5d000 RCX: 0000000000005fdc [35045.833876] RDX: ffff880226522800 RSI: ffff880100000001 RDI: ffff880224e5d258 [35045.833880] RBP: ffff8801fc2d1008 R08: 0000000000000000 R09: ffff880223f4f2c0 [35045.833883] R10: ffff880226522800 R11: ffff8801fc2d1008 R12: ffff880224e5d230 [35045.833887] R13: 0000000000000000 R14: ffffffffa0ca6df0 R15: ffffffffa0ca6e58 [35045.833891] FS: 0000000000000000(0000) GS:ffff8800cf480000(0000) knlGS:0000000000000000 [35045.833896] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [35045.833899] CR2: 0000000000000298 CR3: 0000000001603000 CR4: 00000000000006e0 [35045.833903] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [35045.833907] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [35045.833911] Process khubd (pid: 190, threadinfo ffff8802246d2000, task ffff880224632f40) [35045.833914] Stack: [35045.833916] ffff8801fc2d1008 ffffffff81246e9e ffff8801fc2d10a8 ffff8801fc2d1008 [35045.833923] ffff8801fc2d1000 ffffffffa0202794 ffff880224e5d000 ffff880224e5d4b0 [35045.833929] ffff880224e5d488 ffffffff81247278 ffff880224e5d000 ffff880224e5d258 [35045.833936] Call Trace: [35045.833943] [<ffffffff81246e9e>] ? input_close_device+0x45/0x62 [35045.833952] [<ffffffffa0202794>] ? evdev_disconnect+0x22/0x36 [evdev] [35045.833957] [<ffffffff81247278>] ? input_unregister_device+0x9e/0x124 [35045.833964] [<ffffffffa01f3cc0>] ? ir_unregister_class+0x3b/0x53 [ir_core] [35045.833970] [<ffffffffa01f308d>] ? ir_input_unregister+0x8d/0xa8 [ir_core] [35045.833978] [<ffffffffa0c9d52f>] ? em28xx_ir_fini+0x27/0x41 [em28xx] [35045.833985] [<ffffffffa0c99a1c>] ? em28xx_release_resources+0x25/0x67 [em28xx] [35045.833992] [<ffffffffa0c99b57>] ? em28xx_usb_disconnect+0xf9/0x12d [em28xx] [35045.834005] [<ffffffffa0039d7a>] ? usb_unbind_interface+0x5b/0x123 [usbcore] [35045.834013] [<ffffffff812372e6>] ? __device_release_driver+0x74/0xcc [35045.834018] [<ffffffff812373f2>] ? device_release_driver+0x1d/0x28 [35045.834023] [<ffffffff812367dd>] ? bus_remove_device+0x9f/0xb4 [35045.834029] [<ffffffff81234d5a>] ? device_del+0x130/0x198 [35045.834041] [<ffffffffa0037467>] ? usb_disable_device+0x4c/0xee [usbcore] [35045.834053] [<ffffffffa0032627>] ? usb_disconnect+0x86/0x120 [usbcore] [35045.834064] [<ffffffffa003393e>] ? hub_thread+0x498/0xe31 [usbcore] [35045.834071] [<ffffffff8103a735>] ? dequeue_entity+0x12/0xff [35045.834079] [<ffffffff8106048d>] ? autoremove_wake_function+0x0/0x2a [35045.834090] [<ffffffffa00334a6>] ? hub_thread+0x0/0xe31 [usbcore] [35045.834102] [<ffffffffa00334a6>] ? hub_thread+0x0/0xe31 [usbcore] [35045.834107] [<ffffffff8106003b>] ? kthread+0x7a/0x82 [35045.834113] [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10 [35045.834118] [<ffffffff8105ffc1>] ? kthread+0x0/0x82 [35045.834123] [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10 [35045.834126] Code: 48 8b bb 58 02 00 00 e8 58 95 ef e0 5a 48 89 df 5b 5d e9 4d 95 ef e0 58 5b 5d c3 48 83 ec 08 48 81 c7 58 02 00 00 e8 41 41 04 e1 <48> 8b 80 98 02 00 00 48 8b 78 28 48 8b 40 40 59 ff e0 48 83 ec [35045.834166] RIP [<ffffffffa01f30b8>] ir_close+0x10/0x22 [ir_core] [35045.834173] RSP <ffff8802246d3b60> [35045.834175] CR2: 0000000000000298 [35045.834179] ---[ end trace ad1e4f18ec8a9bf7 ]---
