Package: linux-2.6 Version: 2.6.32-30 Severity: normal File: linux
-- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=99d9aa17-2e81-494b-bcb1-2f01586c9026 ro verbose ** Not tainted ** Kernel log: [ 4.932932] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 4.935050] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 4.935467] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 4.935510] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 4.935552] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 4.935594] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 4.935637] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown [ 4.935680] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 4.935773] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 4.988336] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 4.988391] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 4.988456] hda_intel: Disable MSI for Nvidia chipset [ 4.988534] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 5.115674] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88011e373e00 [ 5.119961] [drm] nouveau 0000:02:00.0: 0xC0AE: parsing output script 1 [ 5.119974] [drm] nouveau 0000:02:00.0: 0xC0AF: parsing output script 2 [ 5.119986] [drm] nouveau 0000:02:00.0: 0xBD9A: parsing clock script 0 [ 5.120278] [drm] nouveau 0000:02:00.0: 0xB6D6: parsing clock script 1 [ 5.120526] Console: switching to colour frame buffer device 160x64 [ 5.122234] fb0: nouveaufb frame buffer device [ 5.122244] registered panic notifier [ 5.122255] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 5.147033] usb 2-1: New USB device found, idVendor=0a81, idProduct=0205 [ 5.147048] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.147056] usb 2-1: Product: PS2 to USB Converter [ 5.147062] usb 2-1: Manufacturer: CHESEN [ 5.147135] usb 2-1: configuration #1 chosen from 1 choice [ 5.197040] usbcore: registered new interface driver hiddev [ 5.205268] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input5 [ 5.205352] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:02.0-1/input0 [ 5.217330] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input6 [ 5.217431] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:02.0-1/input1 [ 5.217463] usbcore: registered new interface driver usbhid [ 5.217470] usbhid: v2.6:USB HID core driver [ 5.568520] usb 4-2: new full speed USB device using ohci_hcd and address 2 [ 5.793039] usb 4-2: New USB device found, idVendor=03f0, idProduct=8704 [ 5.793048] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.793055] usb 4-2: Product: Deskjet 5900 series [ 5.793061] usb 4-2: Manufacturer: HP [ 5.793065] usb 4-2: SerialNumber: CN62B1T0HM04KF [ 5.793149] usb 4-2: configuration #1 chosen from 1 choice [ 5.884083] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input7 [ 6.208121] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704 [ 6.208153] usbcore: registered new interface driver usblp [ 19.152022] scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 19.152024] <Adaptec 2930CU SCSI adapter> [ 19.152025] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs [ 19.152026] [ 89.331100] EXT3 FS on sda3, internal journal [ 89.370960] device-mapper: uevent: version 1.0.3 [ 89.371433] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 89.493942] loop: module loaded [ 89.521532] usbcore: registered new interface driver snd-usb-audio [ 89.532656] usbcore: registered new interface driver usbserial [ 89.532946] USB Serial support registered for generic [ 89.533225] usbcore: registered new interface driver usbserial_generic [ 89.533575] usbserial: USB Serial Driver core [ 89.539079] USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 89.539387] usbcore: registered new interface driver cyberjack [ 89.539663] cyberjack: v1.01 Matthias Bruestle [ 89.540115] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver [ 89.752702] kjournald starting. Commit interval 5 seconds [ 89.753020] EXT3 FS on sda1, internal journal [ 89.753362] EXT3-fs: mounted filesystem with ordered data mode. [ 90.148209] fuse init (API version 7.13) [ 90.584811] NET: Registered protocol family 15 [ 90.596351] alg: No test for cipher_null (cipher_null-generic) [ 90.596697] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 90.597021] alg: No test for digest_null (digest_null-generic) [ 90.597381] alg: No test for compress_null (compress_null-generic) [ 90.619558] padlock: VIA PadLock Hash Engine not detected. [ 90.634330] padlock: VIA PadLock Hash Engine not detected. [ 90.662678] padlock: VIA PadLock not detected. [ 91.693209] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 91.693221] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 91.693222] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 92.484469] alloc irq_desc for 29 on node 0 [ 92.484472] alloc kstat_irqs on node 0 [ 92.484481] forcedeth 0000:00:0a.0: irq 29 for MSI/MSI-X [ 92.509848] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [ 92.511962] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 95.238347] lp: driver loaded but no devices found [ 95.371159] ppdev: user-space parallel port driver [ 97.356173] usb 4-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 103.336018] eth0: no IPv6 routers present [ 113.563561] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 117.326032] ip_tables: (C) 2000-2006 Netfilter Core Team [ 117.362796] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 117.363154] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 117.363157] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 117.363159] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 129.340022] usb 4-1: new full speed USB device using ohci_hcd and address 3 [ 129.564092] usb 4-1: New USB device found, idVendor=0c4b, idProduct=0400 [ 129.564096] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 129.564098] usb 4-1: Product: cyberJack e-com(a) [ 129.564100] usb 4-1: Manufacturer: Reiner-SCT [ 129.564101] usb 4-1: SerialNumber: 2004143581 [ 129.564198] usb 4-1: configuration #1 chosen from 1 choice [ 155.228122] usb 4-1: usbfs: process 3460 (ctapi-proxy) did not claim interface 0 before use [ 435.831217] usb 4-1: usbfs: process 3771 (ctapi-proxy) did not claim interface 0 before use ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: Phoenix Technologies, LTD bios_version: ASUS M3N78 PRO ACPI BIOS Revision 0701 board_vendor: ASUSTeK Computer INC. board_name: M3N78 PRO board_version: 1.XX ** Loaded modules: Module Size Used by xt_limit 1782 8 xt_tcpudp 2319 33 iptable_mangle 2817 0 ipt_LOG 4518 8 ipt_MASQUERADE 1554 0 nf_nat 13388 1 ipt_MASQUERADE xt_DSCP 1995 0 ipt_REJECT 1953 1 nf_conntrack_irc 3347 0 nf_conntrack_ftp 5537 0 nf_conntrack_ipv4 9833 8 nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 xt_state 1303 6 nf_conntrack 46535 6 ipt_MASQUERADE,nf_nat,nf_conntrack_irc,nf_conntrack_ftp,nf_conntrack_ipv4,xt_state iptable_filter 2258 1 ip_tables 13899 2 iptable_mangle,iptable_filter x_tables 12845 8 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,xt_DSCP,ipt_REJECT,xt_state,ip_tables snd_pcsp 6579 0 parport_pc 18855 0 ppdev 5030 0 lp 7462 0 parport 27954 3 parport_pc,ppdev,lp cpufreq_powersave 902 0 cpufreq_stats 2659 0 cpufreq_userspace 1992 0 cpufreq_conservative 5162 0 deflate 1767 0 zlib_deflate 17746 1 deflate ctr 3363 0 twofish 6025 0 twofish_common 13472 1 twofish camellia 17463 0 serpent 16791 0 blowfish 7944 0 cast5 16349 0 des_generic 15475 0 cbc 2539 0 aes_x86_64 7340 0 aes_generic 25714 1 aes_x86_64 xcbc 2325 0 rmd160 7104 0 sha256_generic 8692 0 sha1_generic 1759 0 hmac 2593 0 crypto_null 2492 0 af_key 25421 0 fuse 50625 1 cyberjack 7073 0 usbserial 27399 1 cyberjack snd_usb_audio 64070 0 snd_usb_lib 13928 1 snd_usb_audio loop 11799 0 firewire_sbp2 11514 0 dm_crypt 10664 0 dm_mod 53754 1 dm_crypt usblp 9571 0 snd_hda_codec_nvhdmi 3279 1 snd_hda_codec_realtek 235602 1 usbhid 33292 0 hid 63225 1 usbhid snd_hda_intel 20019 0 snd_hda_codec 54244 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 2 snd_usb_audio,snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60503 5 snd_pcsp,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq nouveau 353128 2 snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 39986 1 nouveau snd 46446 13 snd_pcsp,snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd ohci_hcd 19212 0 ehci_hcd 31151 0 drm_kms_helper 20065 1 nouveau drm 142359 4 nouveau,ttm,drm_kms_helper aic7xxx 107123 0 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm pata_amd 9869 0 scsi_transport_spi 18774 1 aic7xxx i2c_algo_bit 4225 1 nouveau firewire_ohci 19676 0 k8temp 3283 0 usbcore 122034 9 cyberjack,usbserial,snd_usb_audio,snd_usb_lib,usblp,usbhid,ohci_hcd,ehci_hcd edac_core 29261 0 i2c_nforce2 5280 0 sg 18744 0 sr_mod 12602 0 firewire_core 36848 2 firewire_sbp2,firewire_ohci nls_base 6377 1 usbcore video 17445 0 forcedeth 45448 0 crc_itu_t 1307 1 firewire_core edac_mce_amd 6433 0 i2c_core 15712 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2 evdev 7352 16 cdrom 29415 1 sr_mod wmi 4323 0 output 1692 1 video asus_atk0110 7686 0 button 4650 1 nouveau floppy 49087 0 processor 29935 0 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 sd_mod 29889 3 crc_t10dif 1276 1 sd_mod ahci 32374 2 fan 3346 0 ata_generic 3047 0 libata 133632 3 pata_amd,ahci,ata_generic thermal 11674 0 thermal_sys 11942 4 video,processor,fan,thermal scsi_mod 122149 7 firewire_sbp2,aic7xxx,scsi_transport_spi,sg,sr_mod,sd_mod,libata ** PCI devices: 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at ff00 [size=64] Region 4: I/O ports at 1c00 [size=64] Region 5: I/O ports at 1c40 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 11 Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K] 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at fc00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82fe] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at f700 [size=16] Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 29 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at f600 [size=8] Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256] Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: forcedeth 00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:0a.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. IEEE 1394a Firewire Controller [1043:8294] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 01:0b.0 SCSI storage controller [0100]: Adaptec AHA-2930CU [9004:3860] (rev 03) Subsystem: Adaptec Device [9004:3869] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at ec00 [disabled] [size=256] Region 1: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fdd00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: aic7xxx 02:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device [3842:c954] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at dc00 [size=128] Expansion ROM at fbf80000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau ** USB devices: Bus 004 Device 003: ID 0c4b:0400 Reiner SCT Kartensysteme GmbH Bus 004 Device 002: ID 03f0:8704 Hewlett-Packard DeskJet 5940 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0 APT prefers squeeze-updates APT policy: (500, 'squeeze-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: ========================================================================= After Squeeze is installed, originally pcspkr is loaded and 'beep' does not work. However, if pcspkr is removed and snd_pcsp loaded by modprobe, 'beep' works without fault. This change compared with Lenny causes a lot of trouble concerning the use of the pc-speaker, as several files still contain a reference to pcspkr, for instance /sys/devices/platform/pcspkr, /boot/System.map-2.6.32-5-amd64, /usr/share/modconf/eval_de, /usr/src/linux-headers-2.6.32-5-amd64/.config, /usr/src/linux-headers-2.6.32-5-amd64/include/config/auto.conf, /usr/src/linux-headers-2.6.32-5-amd64/include/linux/autoconf.h, /lib/udev/rules.d/60-persistent-input.rules and others. So the pc-speaker cannot work normally when it shall be used by applications under Squeeze, for instance homebanking programs. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
