Your message dated Sun, 15 May 2011 01:40:15 +0100
with message-id <1305420015.4065.469.camel@localhost>
and subject line Re: Bug#626748: linux-image-2.6.38-2-amd64: Some modules fail
to load, unknown kstrtoull - no sound
has caused the Debian Bug report #626748,
regarding linux-image-2.6.38-2-amd64: Some modules fail to load, unknown
kstrtoull - no sound
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
626748: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=626748
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.38-5
Severity: normal
No sound due to failures loading kernel modules. Neither rebooting nor
reinstalling kernel packages seem to fix the issue.
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) ([email protected]) (gcc
version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/yuki-root ro quiet splash
** Not tainted
** Kernel log:
[ 2.640678] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.640879] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 2.640885] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part ccc
[ 2.645152] scsi0 : ahci
[ 2.645391] scsi1 : ahci
[ 2.645526] scsi2 : ahci
[ 2.645661] scsi3 : ahci
[ 2.645794] scsi4 : ahci
[ 2.645928] scsi5 : ahci
[ 2.646032] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00
irq 22
[ 2.646037] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80
irq 22
[ 2.646043] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00
irq 22
[ 2.646049] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80
irq 22
[ 2.646055] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00
irq 22
[ 2.646061] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80
irq 22
[ 2.692280] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 2.870709] usb 3-1: New USB device found, idVendor=04d9, idProduct=2519
[ 2.870715] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.870719] usb 3-1: Product: VISENTA V1
[ 2.952434] input: VISENTA V1 as
/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 2.952547] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10
Keyboard [VISENTA V1 ] on usb-0000:00:12.0-1/input0
[ 2.967499] input: VISENTA V1 as
/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
[ 2.967647] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10
Mouse [VISENTA V1 ] on usb-0000:00:12.0-1/input1
[ 2.967676] usbcore: registered new interface driver usbhid
[ 2.967679] usbhid: USB HID core driver
[ 2.972287] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.972331] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.972375] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.972410] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.972472] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.016272] usb 4-3: new full speed USB device using ohci_hcd and address 2
[ 3.144284] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.145426] ata1.00: ATA-8: ADATA S596 Turbo, 100730, max UDMA/133
[ 3.145431] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.146922] ata1.00: configured for UDMA/133
[ 3.147176] scsi 0:0:0:0: Direct-Access ATA ADATA S596 Turbo 1007
PQ: 0 ANSI: 5
[ 3.168203] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0
GB/29.8 GiB)
[ 3.168347] sd 0:0:0:0: [sda] Write Protect is off
[ 3.168353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.168415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.169556] sda: sda1 sda2 < sda5 >
[ 3.170151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.190552] usb 4-3: New USB device found, idVendor=0a12, idProduct=0001
[ 3.190559] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.190563] usb 4-3: Product: Bluetooth V2.0 Dongle
[ 3.190567] usb 4-3: Manufacturer: Bluetooth v2.0
[ 4.345791] device-mapper: uevent: version 1.0.3
[ 4.346170] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised:
[email protected]
[ 4.544394] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.856703] <30>udevd[405]: starting version 168
[ 4.994013] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.005446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.030618] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid
1022 ss_did 9602
[ 5.030629] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 5.031424] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.039741] ACPI: acpi_idle registered with cpuidle
[ 5.039810] ACPI: processor limited to max C-state 1
[ 5.169105] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 5.181817] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.182640] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 5.191352] MCE: In-kernel MCE decoding enabled.
[ 5.196828] psmouse: Unknown symbol kstrtoull (err 0)
[ 5.209381] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.212741] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.217373] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.220067] edac_core: Unknown symbol kstrtoull (err 0)
[ 5.220568] edac_core: Unknown symbol kstrtoll (err 0)
[ 5.235256] rfkill: Unknown symbol kstrtoull (err 0)
[ 5.338699] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.344132] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.353022] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.358674] snd_hda_codec: Unknown symbol kstrtoull (err 0)
[ 5.841460] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.862121] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
[ 5.935758] loop: module loaded
[ 6.604188] Adding 1310716k swap on /dev/mapper/yuki-swap_1. Priority:-1
extents:1 across:1310716k
[ 6.932391] sunrpc: Unknown symbol kstrtoull (err 0)
[ 6.944078] sunrpc: Unknown symbol kstrtoull (err 0)
[ 6.957731] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.030252] fuse: Unknown symbol kstrtoull (err 0)
[ 7.378429] r8169 0000:03:00.0: eth0: link down
[ 7.378444] r8169 0000:03:00.0: eth0: link down
[ 7.379096] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.524184] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.553171] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.582119] sunrpc: Unknown symbol kstrtoull (err 0)
[ 7.981195] powernow_k8: Unknown symbol kstrtoull (err 0)
[ 8.441069] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input5
[ 8.569437] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.571356] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.613409] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.641311] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.677811] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.695157] rfkill: Unknown symbol kstrtoull (err 0)
[ 8.741212] lp: driver loaded but no devices found
[ 8.755216] ppdev: user-space parallel port driver
[ 9.222824] r8169 0000:03:00.0: eth0: link up
[ 9.223384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.458445] EXT4-fs (dm-0): re-mounted. Opts:
discard,errors=remount-ro,commit=0
[ 19.424091] eth0: no IPv6 routers present
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: ZOTAC
board_name: RS780
board_version:
** Loaded modules:
Module Size Used by
parport_pc 22191 0
ppdev 12725 0
lp 17190 0
parport 31650 3 parport_pc,ppdev,lp
mperf 12411 0
cpufreq_userspace 12576 0
cpufreq_conservative 13878 0
cpufreq_stats 12713 0
cpufreq_powersave 12454 0
autofs4 27310 1
binfmt_misc 12914 1
uinput 17392 1
exportfs 12591 0
loop 22515 0
snd_hwdep 13148 0
snd_pcm 67327 0
snd_seq 44678 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
joydev 17138 0
pcspkr 12579 0
serio_raw 12878 0
k8temp 12531 0
edac_mce_amd 17103 0
snd 52280 5
snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_piix4 12536 0
soundcore 13014 1 snd
snd_page_alloc 12969 1 snd_pcm
processor 27431 0
shpchp 31221 0
thermal_sys 17939 1 processor
evdev 17475 10
pci_hotplug 26711 1 shpchp
ext4 285166 1
mbcache 12930 1 ext4
jbd2 65157 1 ext4
crc16 12343 1 ext4
dm_mod 62467 6
sd_mod 35501 2
crc_t10dif 12348 1 sd_mod
usbhid 39900 0
hid 72616 1 usbhid
radeon 717227 2
ahci 25089 1
ohci_hcd 26400 0
libahci 22568 1 ahci
libata 147240 2 ahci,libahci
ttm 52155 1 radeon
drm_kms_helper 26893 1 radeon
scsi_mod 161457 2 sd_mod,libata
drm 165567 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 12834 1 radeon
ehci_hcd 39529 0
usbcore 122908 4 usbhid,ohci_hcd,ehci_hcd
i2c_core 23725 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
r8169 37209 0
power_supply 13475 1 radeon
mii 12634 1 r8169
nls_base 12753 1 usbcore
button 12994 0
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:01:2e:bc:78:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.167/24 brd 192.168.0.255 scope global eth0
inet6 fe80::201:2eff:febc:78b4/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1920 32 0 0 0 0 0 0 1920
32 0 0 0 0 0 0
eth0: 323456873 216527 0 0 0 0 0 0 6685893
95943 0 0 0 0 0 0
*** Protocol statistics:
Ip:
156275 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
156259 incoming packets delivered
95913 requests sent out
Icmp:
11 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 8
echo requests: 1
echo replies: 2
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
echo request: 2
echo replies: 1
IcmpMsg:
InType0: 2
InType3: 8
InType8: 1
OutType0: 1
OutType3: 8
OutType8: 2
Tcp:
20 active connections openings
4 passive connection openings
2 failed connection attempts
0 connection resets received
1 connections established
156150 segments received
95835 segments send out
0 segments retransmited
0 bad segments received.
2 resets sent
Udp:
64 packets received
8 packets to unknown port received.
0 packet receive errors
67 packets sent
UdpLite:
TcpExt:
8 TCP sockets finished time wait in fast timer
21 delayed acks sent
2 packets directly queued to recvmsg prequeue.
147745 packet headers predicted
173 acknowledgments not containing data payload received
1790 predicted acknowledgments
IpExt:
InMcastPkts: 16
OutMcastPkts: 13
InBcastPkts: 28
InOctets: 317296433
OutOctets: 5339030
InMcastOctets: 3725
OutMcastOctets: 3281
InBcastOctets: 6511
*** Device features:
eth0: 0x4180
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge
[1022:9600]
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA
Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI
mode] [1002:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
[1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller
[1002:4398] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc Device [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4398]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller
[1002:4398] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
[1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 3c)
Subsystem: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383]
Subsystem: ATI Technologies Inc Device [1002:4384]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host
controller [1002:439d]
Subsystem: ATI Technologies Inc Device [1002:4383]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7f6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN
[Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device [1002:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller
[1002:960f]
Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 7
Region 0: Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04d9:2519 Holtek Semiconductor, Inc.
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle
(HCI mode)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.29 Binary firmware for various driver
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--- End Message ---
--- Begin Message ---
On Sat, 2011-05-14 at 19:48 -0400, Rodrigo Chandia wrote:
> Package: linux-2.6
> Version: 2.6.38-5
> Severity: normal
>
>
> No sound due to failures loading kernel modules. Neither rebooting nor
> reinstalling kernel packages seem to fix the issue.
[...]
You are actually booting the kernel from package version 2.6.38-3, not
the newly installed 2.6.38-5. The modules depend on some functions that
were added in 2.6.38-5.
You may be using an old version of lilo, or some other boot loader that
does not follow the current boot loader policy.
Ben.
--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
