Package: linux-2.6 Version: 2.6.32-5-486 Severity: important Hello, I am unable to get motion work stable under squeeze. This was workin fine in lenny.
In squeeze I had to use libv4l-compat and start motion with LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/motion However it crashes the USB subsystem after few seconds: sudo LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/motion [0] Processing thread 0 - config file /etc/motion/motion.conf [0] Motion 3.2.12 Started [0] ffmpeg LIBAVCODEC_BUILD 3412993 LIBAVFORMAT_BUILD 3415808 [0] Thread 1 is from /etc/motion/motion.conf [0] motion-httpd/3.2.12 running, accepting connections [1] Thread 1 started [0] motion-httpd: waiting for data on port TCP 8080 [1] cap.driver: "spca561" [1] cap.card: "Generic Digital camera" [1] cap.bus_info: "usb-0000:00:11.2-2" [1] cap.capabilities=0x05000001 [1] - VIDEO_CAPTURE [1] - READWRITE [1] - STREAMING [1] Test palette YU12 (320x240) [1] Using palette YU12 (320x240) bytesperlines 320 sizeimage 115200 colorspace 00000008 [1] found control 0x00980900, "Brightness", range 0,63 [1] "Brightness", default 32, current 32 [1] found control 0x00980901, "Contrast", range 0,63 [1] "Contrast", default 32, current 32 [1] found control 0x00980903, "Hue", range 1,127 [1] "Hue", default 64, current 64 [1] found control 0x00980910, "Gamma (software)", range 500,3000 [1] "Gamma (software)", default 1000, current 1000 [1] found control 0x00980912, "Auto Gain", range 0,1 [1] "Auto Gain", default 1, current 1 [1] mmap information: [1] frames=4 [1] 0 length=16777216 [1] 1 length=16777216 [1] 2 length=16777216 [1] 3 length=16777216 [1] Using V4L2 [1] Resizing pre_capture buffer to 1 items libv4l2: error dequeuing buf: Input/output error [1] v4l2_next: VIDIOC_DQBUF: EIO (s->pframe 0): Input/output error [1] v4l2_next: VIDIOC_QBUF: Invalid argument [1] v4l2_next: VIDIOC_QBUF: Invalid argument [1] v4l2_next: VIDIOC_QBUF: Invalid argument [1] v4l2_next: VIDIOC_QBUF: Invalid argument [1] Error capturing first image [1] Started stream webcam server in port 8081 [1] v4l2_next: VIDIOC_QBUF: Invalid argument [1] Video device fatal error - Closing video device [1] Closing video device /dev/video0 libv4l2: warning v4l2 mmap buffers still mapped on close() ^C[0] httpd - Finishing [0] httpd Closing [0] httpd thread exit [1] Thread exiting [0] Motion terminating Followin is logged in messages: Jun 12 13:37:40 wyse motion: [1] #011"Auto Gain", default 1, current 1 Jun 12 13:37:41 wyse kernel: [ 258.655781] gspca: ISOC data error: [0] len=320, status=-84 Jun 12 13:37:41 wyse kernel: [ 258.816275] usb 1-2: USB disconnect, address 13 Jun 12 13:37:41 wyse kernel: [ 258.822589] gspca: disconnect complete Jun 12 13:37:41 wyse kernel: [ 259.072151] usb 1-2: new full speed USB device u sing uhci_hcd and address 14 Jun 12 13:37:41 wyse motion: [1] Closing video device /dev/video0 Jun 12 13:37:41 wyse kernel: [ 259.277314] usb 1-2: New USB device found, idVen dor=04fc, idProduct=0561 Jun 12 13:37:41 wyse kernel: [ 259.277365] usb 1-2: New USB device strings: Mfr =1, Product=2, SerialNumber=0 Jun 12 13:37:41 wyse kernel: [ 259.277409] usb 1-2: Product: Generic Digital ca mera Jun 12 13:37:41 wyse kernel: [ 259.277446] usb 1-2: Manufacturer: Sunplus Techn ology Co., Ltd. I don't have any other USB device connected to the machine. -- System Information: Debian Release: 6.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
