Package: linux-2.6 Version: 2.6.32-34squeeze1 Severity: normal
I run Debian Squeeze on Seagate Dockstar. I want to use it together with USB modem as a router instead of current i386 platform which I use now. During migration it found out that kernel module is absent for this kernel, although it's included in: /lib/modules/2.6.39-2-iop32x/kernel/net/atm/br2684.ko linux-image-2.6.39-2-iop32x [armel] /lib/modules/2.6.39-2-ixp4xx/kernel/net/atm/br2684.ko linux-image-2.6.39-2-ixp4xx [armel] It breaks compatibility and br2684ctl is present in armel architecture, but looks like it's not usable here. It seems that option for compiling this module is not set: grep -i br2684 /boot/config-2.6.32-5-kirkwood # CONFIG_ATM_BR2684 is not set On i386 (and rest of architectures I guess) it's compiled as module. Can you please include this module? -- Package-specific info: ** Version: Linux version 2.6.32-5-kirkwood (Debian 2.6.32-31) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Tue Mar 8 10:56:14 UTC 2011 ** Command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=25 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) ** Not tainted ** Kernel log: [ 22.116592] io scheduler noop registered [ 22.116600] io scheduler anticipatory registered [ 22.116607] io scheduler deadline registered [ 22.116786] io scheduler cfq registered (default) [ 22.122785] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 22.123256] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 22.446667] console [ttyS0] enabled [ 22.450770] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 22.459340] Scanning device for bad blocks [ 22.539386] 4 cmdlinepart partitions found on MTD device orion_nand [ 22.545695] Creating 4 MTD partitions on "orion_nand": [ 22.550867] 0x000000000000-0x000000100000 : "u-boot" [ 22.556429] 0x000000100000-0x000000500000 : "uImage" [ 22.561901] 0x000000500000-0x000002500000 : "rootfs" [ 22.567380] 0x000002500000-0x000010000000 : "data" [ 22.573382] mice: PS/2 mouse device common for all mice [ 23.580491] rtc-mv rtc-mv: internal RTC not ticking [ 23.585481] i2c /dev entries driver [ 23.589155] cpuidle: using governor ladder [ 23.593401] cpuidle: using governor menu [ 23.597434] Registered led device: plug:green:health [ 23.602501] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 23.608900] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 23.650517] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 23.690516] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 23.730517] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 23.770516] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 23.777184] TCP cubic registered [ 23.780426] NET: Registered protocol family 17 [ 23.784922] Gating clock of unused units [ 23.784930] before: 0x00dfc3fd [ 23.784937] after: 0x00c701d9 [ 23.785248] registered taskstats version 1 [ 23.790021] /build/buildd-linux-2.6_2.6.32-31-armel-ReZWr3/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 23.804634] Initalizing network drop monitor service [ 23.809678] Freeing init memory: 124K [ 23.890918] udev[44]: starting version 164 [ 24.160549] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 24.166951] mv643xx_eth smi: probed [ 24.239777] net eth0: port 0 with MAC address 00:10:75:1a:dc:56 [ 24.253245] usbcore: registered new interface driver usbfs [ 24.260352] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) [ 24.270790] usbcore: registered new interface driver hub [ 24.281691] usbcore: registered new device driver usb [ 24.304413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 24.311089] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 24.316399] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 24.350512] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 24.370492] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 24.376493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 24.383333] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.390606] usb usb1: Product: Marvell Orion EHCI [ 24.395333] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd [ 24.401725] usb usb1: SerialNumber: orion-ehci.0 [ 24.407260] usb usb1: configuration #1 chosen from 1 choice [ 24.413203] hub 1-0:1.0: USB hub found [ 24.417005] hub 1-0:1.0: 1 port detected [ 24.740498] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 24.891902] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 24.898635] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 24.905815] usb 1-1: Product: USB2.0 Hub [ 24.911193] usb 1-1: configuration #1 chosen from 1 choice [ 24.920098] hub 1-1:1.0: USB hub found [ 24.924283] hub 1-1:1.0: 4 ports detected [ 25.200814] usb 1-1.4: new high speed USB device using orion-ehci and address 3 [ 25.311397] usb 1-1.4: New USB device found, idVendor=0204, idProduct=6025 [ 25.318303] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 25.325662] usb 1-1.4: Product: Flash Disk [ 25.330300] usb 1-1.4: Manufacturer: [ 25.334717] usb 1-1.4: SerialNumber: 170842006E66BF01 [ 25.341173] usb 1-1.4: configuration #1 chosen from 1 choice [ 25.432179] SCSI subsystem initialized [ 25.459355] Initializing USB Mass Storage driver... [ 25.464577] scsi0 : SCSI emulation for USB Mass Storage devices [ 25.471278] usbcore: registered new interface driver usb-storage [ 25.477910] usb-storage: device found at 3 [ 25.477919] usb-storage: waiting for device to settle before scanning [ 25.477953] USB Mass Storage support registered. [ 30.470792] usb-storage: device scan complete [ 30.471370] scsi 0:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2 [ 30.508684] sd 0:0:0:0: [sda] 4091904 512-byte logical blocks: (2.09 GB/1.95 GiB) [ 30.516670] sd 0:0:0:0: [sda] Write Protect is off [ 30.521505] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08 [ 30.521515] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 30.529541] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 30.535694] sda: sda1 sda2 [ 30.542169] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 30.548297] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 50.112727] udev[165]: starting version 164 [ 58.765634] NET: Registered protocol family 10 [ 58.777682] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.969780] fuse init (API version 7.13) [ 60.292345] eth0: link up, 100 Mb/s, full duplex, flow control disabled [ 60.299087] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 62.026628] device eth0 entered promiscuous mode [ 70.900493] eth0: no IPv6 routers present [ 200.595281] Adding 141040k swap on /dev/sda2. Priority:-1 extents:1 across:141040k [ 308.375408] ip_tables: (C) 2000-2006 Netfilter Core Team [ 333.357134] NET: Registered protocol family 8 [ 333.361554] NET: Registered protocol family 20 ** Model information Processor : Feroceon 88FR131 rev 1 (v5l) Hardware : Marvell SheevaPlug Reference Board Revision : 0000 ** Loaded modules: Module Size Used by atm 35020 0 iptable_filter 2012 0 ip_tables 9004 1 iptable_filter x_tables 10753 1 ip_tables fuse 51372 1 ipv6 253910 16 hmac 2475 0 sha1_generic 1717 0 mv_cesa 9270 0 aes_generic 32820 1 mv_cesa ext2 55323 1 mbcache 4860 1 ext2 sd_mod 31324 3 crc_t10dif 1106 1 sd_mod usb_storage 35171 2 scsi_mod 119260 2 sd_mod,usb_storage ehci_hcd 36469 0 mvsdio 5318 0 usbcore 122487 3 usb_storage,ehci_hcd mmc_core 50206 1 mvsdio mv643xx_eth 22562 0 nls_base 5367 1 usbcore libphy 14836 1 mv643xx_eth inet_lro 5060 1 mv643xx_eth ** PCI devices: ** Sound cards: -- System Information: Debian Release: 6.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: armel (armv5tel) Kernel: Linux 2.6.32-5-kirkwood Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-kirkwood depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-34squeeze1 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-kirkwood recommends: ii firmware-linux-free 2.6.32-34squeeze1 Binary firmware for various driver ii uboot-mkimage 0.4 generate kernel image for U-Boot Versions of packages linux-image-2.6.32-5-kirkwood suggests: pn fdutils <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-kirkwood is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood: linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood: false linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood: linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/19700101002851.1697.99706.reportbug@snowflake
