ke, 2011-09-21 kello 18:29 -0500, Jonathan Nieder kirjoitti: > Tomi Leppänen wrote: > > > Didn't make any difference. Here is dmesg now: > [...] > > [ 0.144739] pci 0000:01:00.0: BAR 0: trying firmware assignment [mem > > 0xd0000000-0xdfffffff pref] > > [ 0.144764] pci 0000:01:00.0: BAR 0: [mem 0xd0000000-0xdfffffff pref] > > conflicts with PCI Bus 0000:00 [mem 0x20000000-0xffefffff] > > [ 0.144784] pci 0000:01:00.0: BAR 0: can't assign mem pref (size > > 0x10000000) > > Thanks, Tomi. If you still have time to work on this, please report > it upstream to linux-...@vger.kernel.org (no subscription needed, > since the convention is to always reply-to-all there) and either cc us > or let us know the Message-ID so we can follow the resulting > discussion. What subject should I use?
> Upstream will probably want to know a few things (so it can be good to > use a few attachments): > > - which versions you have tested and what happened with each > - "dmesg" output from a recent (ideally a mainline kernel or 3.1-rc4 > from experimental) right after boot, just like you sent here You mean that I should try with Debian experimental kernel? This guide is probably correct to install it: http://wiki.debian.org/DebianExperimental > - "lspci -vvx" or even "lspci -vvxxx" output (see the lspci manpage > for a warning about the latter) So my biggest worry with -xxx is that my computer may crash? With this test setup it shouldn't be any problem. > Thanks and good luck, > Jonathan -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1316698084.3792.6.camel@tomppeli-laptop
