Package: linux-2.6 Version: 2.6.32-38 Severity: important Tags: upstream Hi,
the lockup happened on unlinking a large file (several GB) on XFS on fibre channel storage (qla2xxx module). We experience very simiral trouble on this machine though, using other kernels (from stable, stable-backports and sid as well) and other fs/storage combinations (ext4 on local Dell PERC controller). This would normally suggest a HW problem, but this time it's unlikely IMO. The machine is new and survived many hours of memtest86-ing. Unfortunately we have no second identical machine to replicate it. The only HW issue I admit is the availability of newer BIOS, which will be flashed next week (sorry if you find this to be an obvious reason of the problem). As I said, the other kernels crash too showing similar backtraces. I think the (eventual) kernel bug may relate to relatively unusual configuration of this machine, which is a NUMA with 64GB RAM, getting probably not that much beating (I mean testing) as the more common desktop PCs. Could the unending find_get_pages indicate slab corruption perhaps? The full boot-time dmesg output may be found on http://joni.heaven-industries.com/~egon/tornado-dmesg.txt The bug is not too easy to trigger, so I hope there's another way to look for it than bisecting 5 years of kernel commits... On the other hand, I'm of course ready to spend a time on it if it helps to make the kernel better :). Thanks, Egon -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-38) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 03:59:20 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=5b5632ae-3e39-4c83-baa6-cc1bb09996a4 ro quiet log_buf_len=512k video=matroxfb:vesa:0x1B8 ** Not tainted ** Kernel log: [26901.529927] BUG: soft lockup - CPU#2 stuck for 61s! [rm:4357] [26901.532682] Modules linked in: nls_utf8 cifs nfs lockd fscache nfs_acl auth_rpcgss sunrpc bonding ext4 jbd2 crc16 xfs exportfs dm_round_robin scsi_dh_emc dm_multipath scsi_dh uvesafb cn snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr psmouse evdev joydev power_meter dcdbas button processor serio_raw ext2 mbcache dm_mod sg sr_mod cdrom ata_generic usbhid hid sd_mod ses crc_t10dif enclosure uhci_hcd ata_piix qla2xxx scsi_transport_fc libata scsi_tgt ehci_hcd megaraid_sas usbcore thermal nls_base scsi_mod bnx2 thermal_sys [last unloaded: scsi_wait_scan] [26901.532720] CPU 2: [26901.532721] Modules linked in: nls_utf8 cifs nfs lockd fscache nfs_acl auth_rpcgss sunrpc bonding ext4 jbd2 crc16 xfs exportfs dm_round_robin scsi_dh_emc dm_multipath scsi_dh uvesafb cn snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr psmouse evdev joydev power_meter dcdbas button processor serio_raw ext2 mbcache dm_mod sg sr_mod cdrom ata_generic usbhid hid sd_mod ses crc_t10dif enclosure uhci_hcd ata_piix qla2xxx scsi_transport_fc libata scsi_tgt ehci_hcd megaraid_sas usbcore thermal nls_base scsi_mod bnx2 thermal_sys [last unloaded: scsi_wait_scan] [26901.532745] Pid: 4357, comm: rm Not tainted 2.6.32-5-amd64 #1 PowerEdge R810 [26901.532747] RIP: 0010:[<ffffffff810b4155>] [<ffffffff810b4155>] find_get_pages+0x5f/0xbb [26901.532758] RSP: 0018:ffff88087a771d58 EFLAGS: 00000297 [26901.532760] RAX: ffffffffffffffff RBX: ffff88087a771df8 RCX: 0000000000000000 [26901.532761] RDX: 000000000059ed9a RSI: ffffea0004412fe8 RDI: ffffea0004412fe0 [26901.532763] RBP: ffffffff8101166e R08: ffffffffffffffc0 R09: 000000000000000d [26901.532764] R10: 0000000000000019 R11: ffff880ac952fb60 R12: 0000000000000292 [26901.532766] R13: ffff880880000000 R14: ffff880880002d00 R15: 0000000000000002 [26901.532768] FS: 00007f4c706fa700(0000) GS:ffff88001da20000(0000) knlGS:0000000000000000 [26901.532770] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [26901.532771] CR2: 00007f4c70254060 CR3: 00000005ac93b000 CR4: 00000000000006e0 [26901.532773] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [26901.532774] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [26901.532776] Call Trace: [26901.532780] [<ffffffff810b4130>] ? find_get_pages+0x3a/0xbb [26901.532786] [<ffffffff810bc278>] ? pagevec_lookup+0x17/0x1e [26901.532789] [<ffffffff810bd358>] ? truncate_inode_pages_range+0x1f3/0x2b0 [26901.532793] [<ffffffff81100b54>] ? generic_delete_inode+0xec/0x168 [26901.532798] [<ffffffff810f9834>] ? do_unlinkat+0xf7/0x149 [26901.532805] [<ffffffff812fca35>] ? page_fault+0x25/0x30 [26901.532808] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b ** Model information sys_vendor: Dell Inc. product_name: PowerEdge R810 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 2.2.3 board_vendor: Dell Inc. board_name: 0TT6JF board_version: A02 ** Loaded modules: Module Size Used by nls_utf8 1208 1 cifs 259072 2 nfs 241226 2 lockd 57619 1 nfs fscache 29834 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33508 1 nfs sunrpc 161589 13 nfs,lockd,nfs_acl,auth_rpcgss bonding 73991 0 ext4 288350 1 jbd2 67015 1 ext4 crc16 1319 1 ext4 xfs 435449 2 exportfs 3170 1 xfs dm_round_robin 2228 2 scsi_dh_emc 6539 4 dm_multipath 13136 2 dm_round_robin scsi_dh 4624 2 scsi_dh_emc,dm_multipath uvesafb 18980 1 cn 4563 2 uvesafb snd_pcm 60487 0 snd_timer 15598 1 snd_pcm snd 46526 2 snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6249 1 snd_pcm psmouse 49937 0 evdev 7352 3 joydev 8459 0 pcspkr 1699 0 dcdbas 5048 0 serio_raw 3752 0 processor 29935 16 button 4650 0 power_meter 8302 0 ext2 52905 1 mbcache 5050 2 ext4,ext2 dm_mod 53898 10 dm_multipath sg 24069 0 sr_mod 12602 0 cdrom 29415 1 sr_mod ata_generic 3239 0 ses 5144 0 sd_mod 29921 8 usbhid 33292 0 hid 63257 1 usbhid crc_t10dif 1276 1 sd_mod enclosure 5503 1 ses ata_piix 21124 0 megaraid_sas 30611 3 uhci_hcd 18521 0 qla2xxx 203077 8 scsi_transport_fc 35355 1 qla2xxx ehci_hcd 32081 0 usbcore 122674 4 usbhid,uhci_hcd,ehci_hcd libata 133776 2 ata_generic,ata_piix scsi_tgt 8482 1 scsi_transport_fc thermal 11674 0 nls_base 6377 3 nls_utf8,cifs,usbcore scsi_mod 126533 11 scsi_dh_emc,scsi_dh,sg,sr_mod,ses,sd_mod,megaraid_sas,qla2xxx,scsi_transport_fc,libata,scsi_tgt bnx2 57385 0 thermal_sys 11942 2 processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3407] (rev 22) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 15 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f2000000-f5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 [8086:3409] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f6000000-f9ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=08, sec-latency=0 I/O behind bridge: 0000d000-0000ffff Memory behind bridge: fb000000-fb3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 [8086:340c] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=0d, sec-latency=0 Memory behind bridge: fb400000-fb4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 22) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 22) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 22) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at cc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 0: Memory at fb5ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at cc40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at cc60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at cc80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at fb5ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=10, subordinate=10, sec-latency=32 Memory behind bridge: fa000000-faffffff Prefetchable memory behind bridge: 00000000f1800000-00000000f1ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18] Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 0: I/O ports at cce8 [size=8] Region 1: I/O ports at ccf8 [size=4] Region 2: I/O ports at ccf0 [size=8] Region 3: I/O ports at ccfc [size=4] Region 4: I/O ports at ccc0 [size=16] Region 5: I/O ports at ccd0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 36 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 48 Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 37 Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell Device [1028:02d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 49 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 03:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fb3e0000 (32-bit, non-prefetchable) [size=128K] Bus: primary=03, secondary=04, subordinate=08, sec-latency=0 I/O behind bridge: 0000d000-0000ffff Memory behind bridge: fb000000-fb2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 04:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: fb000000-fb0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 04:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fb100000-fb1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 04:04.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 04:05.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fb200000-fb2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 05:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic LSI MegaSAS 9260 [1000:0079] (rev 05) Subsystem: Dell PERC H700 Integrated [1028:1f17] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: I/O ports at fc00 [size=256] Region 1: Memory at fb0fc000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at fb040000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fb080000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: megaraid_sas 06:00.0 Fibre Channel [0c04]: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA [1077:2432] (rev 03) Subsystem: QLogic Corp. Device [1077:0137] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 71 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at fb1fc000 (64-bit, non-prefetchable) [size=16K] Expansion ROM at fb180000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: qla2xxx 08:00.0 Fibre Channel [0c04]: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA [1077:2432] (rev 03) Subsystem: QLogic Corp. Device [1077:0137] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 72 Region 0: I/O ports at dc00 [size=256] Region 1: Memory at fb2fc000 (64-bit, non-prefetchable) [size=16K] Expansion ROM at fb280000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: qla2xxx 09:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fb4e0000 (32-bit, non-prefetchable) [size=128K] Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 0a:04.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 0a:05.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 0a:08.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8624 24-lane, 6-Port PCI Express Gen 2 (5.0 GT/s) Switch [ExpressLane] [10b5:8624] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=0a, secondary=0d, subordinate=0d, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 10:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:02d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f1800000 (32-bit, prefetchable) [size=8M] Region 1: Memory at faffc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at fa000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at fa800000 [disabled] [size=64K] Capabilities: <access denied> ** USB devices: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 06f2:0011 Emine Technology Co. KVM Switch Keyboard Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0624:0248 Avocent Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/16 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs ii linux-base 3.3 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: ii firmware-bnx2 0.33 Binary firmware for Broadcom NetXt pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) ii firmware-qlogic 0.33 Binary firmware for QLogic IBA7220 pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
