Package: linux-2.6 Version: 3.0.0-5 Severity: normal I'm using an acer AL715 LCD monitor, connected via a full 15-pin VGA cable to the analog pins on the DVI port on this powerpc Mac Mini.
the computer doesn't seem to properly detect the monitor, and chooses awkward/low resolution settings instead of the native 1280x1024. It used to give native 1280x1024 both on the virtual terminals and under X11 several weeks or months ago using sid, but unfortunately i don't have records of when it specifically changed :( The monitor is not properly detected under X11, and read-edid doesn't seem to work either: consoleuser@bigpuff:/tmp$ xrandr Screen 0: minimum 320 x 200, current 1152 x 864, maximum 1360 x 1360 DVI-0 disconnected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm S-video disconnected (normal left inverted right x axis y axis) 1152x864 (0x55) 81.6MHz h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.7KHz v: height 864 start 865 end 868 total 895 clock 60.0Hz consoleuser@bigpuff:/tmp$ get-edid | parse-edid Can't find EDID file in /proc/device-tree/pci@f0000000/ATY,RockHopper2Parent@10/ATY,RockHopper2_A@0 parse-edid: parse-edid version 2.0.0 parse-edid: IO error reading EDID consoleuser@bigpuff:/tmp$ ls -l /proc/device-tree/pci@f0000000/ATY,RockHopper2Parent@10/ATY,RockHopper2_A@0/ total 0 -r--r--r-- 1 root root 4 Oct 20 12:56 AAPL,gray-page -r--r--r-- 1 root root 4 Oct 20 12:56 address -r--r--r-- 1 root root 10 Oct 20 12:56 character-set -r--r--r-- 1 root root 16 Oct 20 12:56 compatible -r--r--r-- 1 root root 4 Oct 20 12:56 connector-type -r--r--r-- 1 root root 4 Oct 20 12:56 depth -r--r--r-- 1 root root 8 Oct 20 12:56 device_type -r--r--r-- 1 root root 4 Oct 20 12:56 display-type -r--r--r-- 1 root root 4 Oct 20 12:56 height -r--r--r-- 1 root root 0 Oct 20 12:56 iso6429-1983-colors -r--r--r-- 1 root root 4 Oct 20 12:56 linebytes -r--r--r-- 1 root root 0 Oct 20 12:56 linux,boot-display -r--r--r-- 1 root root 0 Oct 20 12:56 linux,opened -r--r--r-- 1 root root 4 Oct 20 12:56 linux,phandle -r--r--r-- 1 root root 18 Oct 20 12:56 name -r--r--r-- 1 root root 4 Oct 20 12:56 reg -r--r--r-- 1 root root 4 Oct 20 12:56 width consoleuser@bigpuff:/tmp$ I've installed fbset, and i can use "fbset 1280x1024-70" from a virtual terminal to get a native resolution instead of 640x480, but this used to happen automatically during boot, and i'm not sure why it doesn't any more. I'm happy to provide any other data that would be useful, and of course would be fine if there is a better package to reassign this to (libdrm? something else?) but i don't know what it would be. Regards, --dkg -- Package-specific info: ** Version: Linux version 3.0.0-2-powerpc (Debian 3.0.0-5) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-9) ) #1 Fri Oct 7 21:49:07 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinux-3.0.0-2-powerpc root=/dev/mapper/bigpuff-root ro quiet ** Not tainted ** Kernel log: [ 2.456598] input: USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.1/input/input2 [ 2.456744] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0001:10:1b.0-1/input1 [ 2.456794] usbcore: registered new interface driver usbhid [ 2.456798] usbhid: USB HID core driver [ 2.572387] usb 4-1: new low speed USB device number 2 using ohci_hcd [ 2.786591] usb 4-1: New USB device found, idVendor=046d, idProduct=c401 [ 2.786599] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.786605] usb 4-1: Product: USB-PS/2 Trackball [ 2.786610] usb 4-1: Manufacturer: Logitech [ 2.797297] input: Logitech USB-PS/2 Trackball as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/input/input3 [ 2.797489] generic-usb 0003:046D:C401.0003: input,hidraw2: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0001:10:1b.1-1/input0 [ 2.884381] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 [ 2.886502] scsi1 : pata_macio [ 2.886633] ata2: PATA max MWDMA2 irq 24 [ 3.058081] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 3.058191] sd 0:0:0:0: [sda] Write Protect is off [ 3.058198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.058243] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.148302] sda: [mac] sda1 sda2 sda3 sda4 sda5 [ 3.157998] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.158007] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.158223] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.168255] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.181702] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.182677] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 3.897790] device-mapper: uevent: version 1.0.3 [ 3.898712] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-de...@redhat.com [ 4.192547] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 4.789359] PM: Starting manual resume from disk [ 4.789373] PM: Hibernation image partition 254:1 present [ 4.789377] PM: Looking for hibernation image. [ 4.813208] PM: Image not found (code -22) [ 4.813213] PM: Hibernation image not present or could not be loaded. [ 4.852072] EXT3-fs: barriers not enabled [ 4.864611] kjournald starting. Commit interval 5 seconds [ 4.864639] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 7.384468] udevd[229]: starting version 172 [ 8.866986] PowerMac i2c bus pmu 2 registered [ 8.867035] PowerMac i2c bus pmu 1 registered [ 8.867079] PowerMac i2c bus mac-io 0 registered [ 8.867123] PowerMac i2c bus uni-n 1 registered [ 8.867198] PowerMac i2c bus uni-n 0 registered [ 10.154363] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 10.154402] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 10.154422] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 10.214921] snd-aoa-fabric-layout: Using direct GPIOs [ 10.215032] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 10.234955] snd-aoa-fabric-layout: can use this codec [ 12.190833] EXT3-fs (dm-0): using internal journal [ 12.547974] loop: module loaded [ 15.288653] Adding 1462268k swap on /dev/mapper/bigpuff-swap_1. Priority:-1 extents:1 across:1462268k [ 20.041236] EXT3-fs: barriers not enabled [ 20.053340] kjournald starting. Commit interval 5 seconds [ 20.053477] EXT3-fs (sda3): using internal journal [ 20.053487] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 20.111340] EXT3-fs: barriers not enabled [ 20.127627] kjournald starting. Commit interval 5 seconds [ 20.127806] EXT3-fs (dm-5): using internal journal [ 20.127814] EXT3-fs (dm-5): mounted filesystem with ordered data mode [ 20.178472] EXT3-fs: barriers not enabled [ 20.191497] kjournald starting. Commit interval 5 seconds [ 20.191624] EXT3-fs (dm-4): using internal journal [ 20.191632] EXT3-fs (dm-4): mounted filesystem with ordered data mode [ 20.252566] EXT3-fs: barriers not enabled [ 20.269739] kjournald starting. Commit interval 5 seconds [ 20.269908] EXT3-fs (dm-2): using internal journal [ 20.269916] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 20.312116] EXT3-fs: barriers not enabled [ 20.326731] kjournald starting. Commit interval 5 seconds [ 20.326939] EXT3-fs (dm-3): using internal journal [ 20.326949] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 24.365649] fuse init (API version 7.16) [ 31.607456] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 31.607468] gem 0002:20:0f.0: eth0: Pause is disabled [ 33.980502] eth0: IPv6 duplicate address 2001:470:1f07:60d:20d:93ff:fe60:7a0e detected! [ 36.783326] Bluetooth: Core ver 2.16 [ 36.783384] NET: Registered protocol family 31 [ 36.783388] Bluetooth: HCI device and connection manager initialized [ 36.783395] Bluetooth: HCI socket layer initialized [ 36.783400] Bluetooth: L2CAP socket layer initialized [ 36.783939] Bluetooth: SCO socket layer initialized [ 36.896440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.896450] Bluetooth: BNEP filters: protocol multicast [ 36.928763] Bluetooth: RFCOMM TTY layer initialized [ 36.928776] Bluetooth: RFCOMM socket layer initialized [ 36.928781] Bluetooth: RFCOMM ver 1.11 [ 38.816015] radeonfb 0000:00:10.0: Invalid ROM contents [ 38.816157] radeonfb 0000:00:10.0: Invalid ROM contents [ 39.076837] [drm] Initialized drm 1.1.0 20060810 [ 39.287691] [drm] radeon defaulting to kernel modesetting. [ 39.287703] [drm] radeon kernel modesetting enabled. [ 41.738536] input: Mouseemu virtual keyboard as /devices/virtual/input/input4 [ 41.738862] input: Mouseemu virtual mouse as /devices/virtual/input/input5 [ 264.804489] eth0: IPv6 duplicate address 2001:470:1f07:60d:20d:93ff:fe60:7a0e detected! [ 533.059504] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 533.059979] SGI XFS Quota Management subsystem [ 533.150436] JFS: nTxBlock = 4008, nTxLock = 32066 [ 533.361064] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 533.471228] QNX4 filesystem 0.2.3 registered. [ 533.723759] Btrfs loaded ** Model information revision : 1.2 (pvr 8003 0102) platform : PowerMac model : PowerMac10,1 machine : PowerMac10,1 motherboard : PowerMac10,1 MacRISC3 Power Macintosh ** Loaded modules: Module Size Used by btrfs 637575 0 zlib_deflate 21988 1 btrfs crc32c 5799 1 libcrc32c 4290 1 btrfs ufs 76312 0 qnx4 10352 0 hfsplus 81252 0 minix 29837 0 ntfs 215560 0 vfat 12532 0 msdos 9875 0 fat 49127 2 vfat,msdos jfs 163907 0 xfs 617693 0 reiserfs 240828 0 ext4 334127 0 jbd2 59881 1 ext4 ext2 65150 0 uinput 10269 2 cpufreq_userspace 5116 0 cpufreq_powersave 4142 0 radeon 900874 0 cpufreq_stats 5698 0 cpufreq_ondemand 8949 0 ttm 50177 1 radeon drm_kms_helper 25048 1 radeon cpufreq_conservative 8369 0 drm 152107 3 radeon,ttm,drm_kms_helper power_supply 10983 1 radeon rfcomm 35410 0 bnep 13979 2 bluetooth 125331 8 rfcomm,bnep rfkill 17454 3 bluetooth crc16 4479 2 ext4,bluetooth binfmt_misc 10042 1 fuse 63722 1 hfs 47193 1 loop 16971 0 firewire_sbp2 15525 0 snd_aoa_codec_toonie 4883 2 snd_aoa_fabric_layout 11963 1 snd_aoa 14984 2 snd_aoa_codec_toonie,snd_aoa_fabric_layout snd_aoa_i2sbus 19872 1 snd_pcm 64222 1 snd_aoa_i2sbus snd_page_alloc 8957 1 snd_pcm snd_seq 48485 0 snd_timer 20149 2 snd_pcm,snd_seq snd_seq_device 8241 1 snd_seq snd 50534 10 snd_aoa_codec_toonie,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 7985 1 snd evdev 12325 15 snd_aoa_soundbus 6653 2 snd_aoa_fabric_layout,snd_aoa_i2sbus i2c_powermac 6659 0 ext3 123756 6 jbd 40727 1 ext3 mbcache 7898 3 ext4,ext2,ext3 dm_mod 64680 21 sg 24127 0 sr_mod 17278 0 cdrom 36683 1 sr_mod sd_mod 33903 4 crc_t10dif 4496 1 sd_mod usbhid 36796 0 hid 71071 1 usbhid pata_macio 15121 3 libata 150996 1 pata_macio scsi_mod 153077 5 firewire_sbp2,sg,sr_mod,sd_mod,libata ohci_hcd 33586 0 firewire_ohci 31235 0 firewire_core 48474 2 firewire_sbp2,firewire_ohci ehci_hcd 43399 0 sungem 30773 0 usbcore 128338 4 usbhid,ohci_hcd,ehci_hcd crc_itu_t 4499 1 firewire_core sungem_phy 12770 1 sungem ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200] [1002:5962] (rev 01) (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc RV280 [Radeon 9200] [1002:5962] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 90020000 [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0001:10:17.0 Unassigned class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 27 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 28 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 63 Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 63 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI]) Subsystem: NEC Corporation USB 2.0 [1033:00e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 63 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0002:20:0d.0 Unassigned class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 39 Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: pata-pci-macio 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] Kernel driver in use: gem ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1241:1603 Belkin Keyboard Bus 004 Device 002: ID 046d:c401 Logitech, Inc. TrackMan Marble Wheel -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: powerpc (ppc) Kernel: Linux 3.0.0-2-powerpc Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-2-powerpc depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii libc6 2.13-21 ii linux-base 3.3 ii module-init-tools 3.16-1 Versions of packages linux-image-3.0.0-2-powerpc recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.0.0-2-powerpc suggests: pn linux-doc-3.0.0 <none> pn mkvmlinuz <none> Versions of packages linux-image-3.0.0-2-powerpc is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux <none> pn firmware-linux-nonfree 0.33 pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.0.0-2-powerpc/postinst/ignoring-ramdisk: linux-image-3.0.0-2-powerpc/postinst/missing-firmware-3.0.0-2-powerpc: linux-image-3.0.0-2-powerpc/prerm/removing-running-kernel-3.0.0-2-powerpc: true linux-image-3.0.0-2-powerpc/postinst/depmod-error-initrd-3.0.0-2-powerpc: false -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111020170858.1902.75982.report...@bigpuff.jrec.urbanacacedemy.org