Package: linux-2.6 Version: 3.0.0-3 Severity: important Dear Maintainer,
System in question is a Sylvania G netbook. It is an older model based on a VIA CPU (C7-M, CX700/VX700 UniChrome display card). Running 'modprobe viafb' will blank the screen and also aparantly completely hang the system. I worked around this by putting: install viafb /bin/false in a modprobe.d file. Once this is out of the way I manage to get a display running. I still seem to get the system hung after a while. This seems to be when the screen is blaked-out, but I'm not really sure yet. Hanging the display by loading viafb was also reproduced with kernel 2.6.32-5-686, which is the oldest one I have on the system. -- Package-specific info: ** Version: Linux version 3.0.0-1-686-pae (Debian 3.0.0-3) ([email protected]) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:41:03 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=68486314-a888-42c0-907a-672a1aa79782 ro quiet ** Not tainted ** Kernel log: [ 5.484047] usb 1-4: new high speed USB device number 2 using ehci_hcd [ 5.500462] ata2.00: configured for UDMA/33 [ 5.501128] scsi 1:0:0:0: Direct-Access ATA ST730212DE 3.01 PQ: 0 ANSI: 5 [ 5.533600] sd 1:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 5.533821] sd 1:0:0:0: [sda] Write Protect is off [ 5.533842] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.533939] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.623031] usb 1-4: New USB device found, idVendor=0bda, idProduct=8187 [ 5.623054] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.623071] usb 1-4: Product: RTL8187_Wireless [ 5.623086] usb 1-4: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 5.623101] usb 1-4: SerialNumber: 0015AFC014DC [ 5.625686] sda: sda1 sda2 < sda5 > [ 5.628875] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.655524] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.740080] usb 1-5: new high speed USB device number 3 using ehci_hcd [ 6.118879] usb 1-5: New USB device found, idVendor=5986, idProduct=0101 [ 6.118904] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.118922] usb 1-5: Product: USB2.0 Camera [ 6.240070] usb 1-6: new high speed USB device number 4 using ehci_hcd [ 6.387509] usb 1-6: New USB device found, idVendor=0bda, idProduct=0158 [ 6.387533] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.387550] usb 1-6: Product: USB2.0-CRW [ 6.387564] usb 1-6: Manufacturer: Generic [ 6.387578] usb 1-6: SerialNumber: 20060413092100000 [ 6.417541] usbcore: registered new interface driver uas [ 6.425897] Initializing USB Mass Storage driver... [ 6.427032] usbcore: registered new interface driver usb-storage [ 6.427049] USB Mass Storage support registered. [ 6.431315] scsi2 : usb-storage 1-6:1.0 [ 6.432124] usbcore: registered new interface driver ums-realtek [ 6.591272] PM: Starting manual resume from disk [ 6.591293] PM: Hibernation image partition 8:5 present [ 6.591305] PM: Looking for hibernation image. [ 6.591895] PM: Image not found (code -22) [ 6.591908] PM: Hibernation image not present or could not be loaded. [ 6.628856] EXT3-fs (sda1): recovery required on readonly filesystem [ 6.628877] EXT3-fs (sda1): write access will be enabled during recovery [ 6.645201] EXT3-fs: barriers not enabled [ 7.444500] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 7.456871] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.462111] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 13.092912] kjournald starting. Commit interval 5 seconds [ 13.093248] EXT3-fs (sda1): recovery complete [ 13.112402] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 17.012510] udevd[236]: starting version 172 [ 18.441785] ACPI: acpi_idle registered with cpuidle [ 18.442170] Marking TSC unstable due to TSC halts in idle [ 18.450889] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 18.450923] ACPI: Power Button [PWRB] [ 18.451377] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 18.451498] ACPI: Lid Switch [LID] [ 18.451865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 18.451890] ACPI: Power Button [PWRF] [ 18.470152] Switching to clocksource acpi_pm [ 19.005540] ACPI: Battery Slot [BAT0] (battery present) [ 19.009428] ACPI: AC Adapter [ACAD] (on-line) [ 19.258649] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/LNXVIDEO:00/input/input4 [ 19.258694] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 19.462305] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 19.701002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.723137] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.884610] Linux media interface: v0.10 [ 20.175598] Linux video capture interface: v2.00 [ 20.333677] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0101) [ 20.351551] input: USB2.0 Camera as /devices/pci0000:00/0000:00:10.4/usb1/1-5/1-5:1.0/input/input6 [ 20.356123] usbcore: registered new interface driver uvcvideo [ 20.356140] USB Video Class driver (v1.1.0) [ 20.393131] Error: Driver 'pcspkr' is already registered, aborting... [ 20.504182] cfg80211: Calling CRDA to update world regulatory domain [ 20.583631] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04750/0x200000/0x0 [ 20.644614] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 20.939036] HDA Intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.939172] HDA Intel 0000:02:01.0: irq 40 for MSI/MSI-X [ 20.939251] HDA Intel 0000:02:01.0: setting latency timer to 64 [ 20.939270] HDA Intel 0000:02:01.0: PCI: Disallowing DAC for device [ 22.442245] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 22.445651] ieee80211 phy0: hwaddr 00:15:af:c0:14:dc, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 22.475705] rtl8187: Customer ID is 0x00 [ 22.478639] Registered led device: rtl8187-phy0::radio [ 22.482442] Registered led device: rtl8187-phy0::tx [ 22.485498] Registered led device: rtl8187-phy0::rx [ 22.486696] rtl8187: wireless switch is on [ 22.488283] usbcore: registered new interface driver rtl8187 [ 24.911703] Adding 1238012k swap on /dev/sda5. Priority:-1 extents:1 across:1238012k [ 25.708196] EXT3-fs (sda1): using internal journal [ 26.083808] loop: module loaded [ 29.272128] fuse init (API version 7.16) [ 40.387076] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.442981] 8139too 0000:03:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 43.864492] [drm] Initialized drm 1.1.0 20060810 [ 43.937276] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 43.941600] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 43.941621] [drm] No driver support for vblank timestamp query. [ 43.941644] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 44.056948] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 44.057014] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 44.057134] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 50.848062] eth0: no IPv6 routers present [ 105.747250] mtrr: no MTRR for a0000000,4000000 found ** Model information not available ** Loaded modules: Module Size Used by via 34755 0 drm 129847 1 via fuse 56331 1 loop 17866 0 i2c_algo_bit 12722 0 arc4 12418 2 rtl8187 30895 0 mac80211 165768 1 rtl8187 snd_hda_codec_via 48131 1 snd_hda_intel 21691 0 joydev 17006 0 snd_hda_codec 58364 2 snd_hda_codec_via,snd_hda_intel snd_hwdep 12936 1 snd_hda_codec cfg80211 112970 2 rtl8187,mac80211 uvcvideo 56927 0 snd_pcm 53315 2 snd_hda_intel,snd_hda_codec rfkill 18522 1 cfg80211 videodev 61530 1 uvcvideo snd_timer 22027 1 snd_pcm snd 38562 6 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer i2c_viapro 12451 0 soundcore 12992 1 snd eeprom_93cx6 12423 1 rtl8187 media 13692 2 uvcvideo,videodev evdev 12995 5 i2c_core 19141 4 drm,i2c_algo_bit,videodev,i2c_viapro shpchp 26759 0 pci_hotplug 26736 1 shpchp snd_page_alloc 12899 2 snd_hda_intel,snd_pcm psmouse 46216 0 pcspkr 12515 0 video 17475 0 serio_raw 12734 0 ac 12552 0 battery 12957 0 power_supply 13283 2 ac,battery button 12810 0 processor 27382 1 ext3 99597 1 jbd 42027 1 ext3 mbcache 12898 1 ext3 ums_realtek 12662 0 usb_storage 35164 1 ums_realtek uas 13099 0 sg 21564 0 sd_mod 35493 3 crc_t10dif 12332 1 sd_mod ata_generic 12439 0 pata_via 12733 2 libata 133339 2 ata_generic,pata_via uhci_hcd 22275 0 ehci_hcd 35401 0 scsi_mod 135178 5 usb_storage,uas,sg,sd_mod,libata usbcore 104234 8 rtl8187,uvcvideo,ums_realtek,usb_storage,uas,uhci_hcd,ehci_hcd 8139too 22108 0 8139cp 22301 0 mii 12595 2 8139too,8139cp fan 12594 0 thermal 13138 0 thermal_sys 17677 4 video,processor,fan,thermal ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324] (rev 10) Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 8 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Capabilities: <access denied> Kernel driver in use: agpgart-via 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:1324] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:2324] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.3 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:3324] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:4324] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:7324] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d0000000-d0ffffff Prefetchable memory behind bridge: a0000000-bfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. CX700/VX700 RAID Controller [1106:0581] (prog-if 8a [Master SecP PriP]) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d90] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at 4460 [size=16] Capabilities: <access denied> Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI]) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d90] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 4400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI]) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d90] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at 4420 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI]) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d90] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 4440 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI]) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d90] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 23 Region 0: Memory at d1400000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge [1106:8324] Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d90] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:11.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Internal Module Bus [1106:324e] Subsystem: VIA Technologies, Inc. CX700/VX700 Internal Module Bus [1106:324e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 8 Capabilities: <access denied> 00:13.0 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:324b] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d1000000-d10fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:13.1 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge [1106:324a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d1100000-d11fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CX700/VX700 [S3 UniChrome Pro] [1106:3157] (rev 03) (prog-if 00 [VGA controller]) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d30] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (500ns min) Interrupt: pin A routed to IRQ 16 Region 0: Memory at a0000000 (32-bit, prefetchable) [size=512M] Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 02:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d40] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at d1000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 03:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:2d20] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 5000 [size=256] Region 1: Memory at d1100000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter Bus 001 Device 003: ID 5986:0101 Acer, Inc USB2.0 Camera Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.0.0-1-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.40 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.3 ii module-init-tools 3.16-1 Versions of packages linux-image-3.0.0-1-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-21 Versions of packages linux-image-3.0.0-1-686-pae suggests: pn grub-pc 1.99-12 pn linux-doc-3.0.0 <none> Versions of packages linux-image-3.0.0-1-686-pae is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.0.0-1-686-pae/prerm/removing-running-kernel-3.0.0-1-686-pae: true linux-image-3.0.0-1-686-pae/postinst/ignoring-ramdisk: linux-image-3.0.0-1-686-pae/postinst/missing-firmware-3.0.0-1-686-pae: linux-image-3.0.0-1-686-pae/postinst/depmod-error-initrd-3.0.0-1-686-pae: false -- Tzafrir Cohen | [email protected] | VIM is http://tzafrir.org.il | | a Mutt's [email protected] | | best [email protected] | | friend -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
