Your message dated Wed, 23 Nov 2011 21:18:13 -0600
with message-id <[email protected]>
and subject line Re: linux-image-2.6.26-2-686: Crash/Hang with heavy disk write
when using SATA AHCI mode
has caused the Debian Bug report #548630,
regarding linux-image-2.6.26-2-686: Crash/Hang with heavy disk write when using
SATA AHCI mode
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
548630: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=548630
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19
Severity: important
System was configured in BIOS with IDE mode set to AHCI.
- ASUS p5q-vm MB, latest BIOS.
- When having heavy disk writing (disk to disk, or via network rsync from
machine 1 to
target machine), system hangs after several GBytes have been written to disk.
- Problem is reproducable. Happens all the time when I want to rsync 50GB from
one PC to
target. Reproduced atleast 10 times. 100% hitrate with rsync 50GB data.
- Problems happens with two different brands of HD's (did not test more)
- No logging information logged. Machine is dead
- Configured logging to remote machine. Did not result in any usefull logging.
- Pinging target not possible after hang.
- Keyboard is dead after hang.
- GUI hangs after system hang.
Problem is "resolved" by setting in BIOS the IDE mode to "IDE" instead of
"AHCI". No hangs
since change in BIOS configuration.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19) ([email protected]) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC
2009
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
[ 2.765782] ata1.01: HPA detected: current 2930277168, native
18446744072344861488
[ 2.765789] ata1.01: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 2.765794] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.773584] ata1.00: configured for UDMA/133
[ 2.782211] ata1.01: configured for UDMA/133
[ 3.257023] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.265250] ata2.00: HPA detected: current 2930277168, native
18446744072344861488
[ 3.265256] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 3.265260] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.273220] ata2.00: configured for UDMA/133
[ 3.273342] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C
PQ: 0 ANSI: 5
[ 3.273535] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD154UI 1AG0
PQ: 0 ANSI: 5
[ 3.273629] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0
PQ: 0 ANSI: 5
[ 3.273694] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) ->
IRQ 19
[ 3.273698] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.273732] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 3.274310] scsi2 : ata_piix
[ 3.274310] scsi3 : ata_piix
[ 3.274310] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 3.274310] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 3.604057] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.933491] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.948892] Driver 'sd' needs updating - please use bus_type methods
[ 3.948893] sd 0:0:0:0: [sda] 62500000 512-byte hardware sectors (32000 MB)
[ 3.948893] sd 0:0:0:0: [sda] Write Protect is off
[ 3.948893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.948893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.948893] sd 0:0:0:0: [sda] 62500000 512-byte hardware sectors (32000 MB)
[ 3.948893] sd 0:0:0:0: [sda] Write Protect is off
[ 3.948893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.948893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.948893] sda: sda1 sda2
[ 3.950456] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.950807] sd 0:0:1:0: [sdb] 2930277168 512-byte hardware sectors (1500302
MB)
[ 3.950807] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.950807] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.950807] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.950807] sd 0:0:1:0: [sdb] 2930277168 512-byte hardware sectors (1500302
MB)
[ 3.950807] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.950807] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.950807] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.950807] sdb: sdb1
[ 3.959031] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.959031] sd 1:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302
MB)
[ 3.959031] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.959031] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.959031] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.959031] sd 1:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302
MB)
[ 3.959031] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.959031] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.959031] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.959031] sdc: sdc1
[ 3.975103] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 4.165903] kjournald starting. Commit interval 5 seconds
[ 4.165903] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.428209] udevd version 125 started
[ 4.707991] Linux agpgart interface v0.103
[ 4.721622] agpgart: Detected an Intel G45/G43 Chipset.
[ 4.722134] agpgart: Detected 32764K stolen memory.
[ 4.735489] agpgart: AGP aperture is 256M @ 0xd0000000
[ 4.763223] input: Power Button (FF) as /class/input/input0
[ 4.787295] ACPI: Power Button (FF) [PWRF]
[ 4.787385] input: Power Button (CM) as /class/input/input1
[ 4.812446] ACPI: Power Button (CM) [PWRB]
[ 5.124052] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) ->
IRQ 18
[ 5.199442] input: PC Speaker as /class/input/input2
[ 5.645105] EXT3 FS on sda1, internal journal
[ 6.423300] loop: module loaded
[ 6.458052] device-mapper: uevent: version 1.0.3
[ 6.458052] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[email protected]
[ 6.610839] fuse init (API version 7.9)
[ 6.626548] kjournald starting. Commit interval 5 seconds
[ 6.626655] EXT3 FS on sda2, internal journal
[ 6.626663] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.756609] r8169: eth0: link up
[ 6.756609] r8169: eth0: link up
[ 6.869045] NET: Registered protocol family 10
[ 6.869391] lo: Disabled Privacy Extensions
[ 8.902689] lp: driver loaded but no devices found
[ 8.956981] ppdev: user-space parallel port driver
[ 9.877547] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 10.263402] NET: Registered protocol family 5
[ 10.312319] mtrr: type mismatch for d1fe0000,10000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1fc0000,20000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1f80000,40000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1f00000,80000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1e00000,100000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1c00000,200000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1800000,400000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d1000000,800000 old: write-back new:
write-combining
[ 10.312319] mtrr: type mismatch for d0000000,1000000 old: write-back new:
write-combining
[ 17.457027] eth0: no IPv6 routers present
[ 2360.927812] padlock: VIA PadLock not detected.
[ 2361.058687] padlock: VIA PadLock Hash Engine not detected.
[ 2361.292465] kjournald starting. Commit interval 5 seconds
[ 2361.295336] EXT3 FS on dm-0, internal journal
[ 2361.295336] EXT3-fs: mounted filesystem with ordered data mode.
[ 2367.216504] kjournald starting. Commit interval 5 seconds
[ 2367.218250] EXT3 FS on dm-1, internal journal
[ 2367.218250] EXT3-fs: mounted filesystem with ordered data mode.
** Loaded modules:
Module Size Used by
sha256_generic 11360 0
aes_i586 7744 4
aes_generic 29256 1 aes_i586
cbc 3264 2
appletalk 26016 20
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
battery 10180 0
acpi_cpufreq 6796 1
cpufreq_conservative 5960 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 1
cpufreq_powersave 1856 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
ipv6 235396 35
fuse 42908 1
dm_crypt 11172 1
crypto_blkcipher 15236 4 cbc,dm_crypt
dm_mod 46216 5 dm_crypt
loop 12748 0
evdev 8000 2
pcspkr 2432 0
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
button 6096 0
intel_agp 22524 1
agpgart 28808 1 intel_agp
ext3 105576 4
jbd 39476 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 7
ata_generic 4676 0
ata_piix 14180 4
libata 140448 2 ata_generic,ata_piix
scsi_mod 129548 2 sd_mod,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
ide_core 96168 1 ide_pci_generic
r8169 23684 0
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118192 3 ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 4 acpi_cpufreq,thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe9fa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9f9000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: I/O ports at c080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 221
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** Sound cards:
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
--- Begin Message ---
Jonathan Nieder wrote:
> Hans IJ wrote:
>> I cannot use the hardware to reproduce. It is currently my LAMP server, and
>> used 24/7. Sorry. I was able to fix at that time the bug by putting the two
>> DDR modules in 32 bit configuration, and not in 64 bit.
>>
>> I hope this helps a bit...
>
> No problem. If there won't be time in the next month or so I guess we
> should close the bug
Hence closing, but please don't hesitate to let us know if you run
into this again or if you would like to debug it more.
--- End Message ---
