Gabriel VLASIU wrote: > USB drive is recognized only the first time. Does not matter which USB > port I use. See attached file.
Forwarding to the correct bug number. What kernel version is this? (/proc/version or a log from bootup would say.)
--- Begin Message --------BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! On Thu, 24 Nov 2011, Debian Bug Tracking System wrote: > This is an automatic notification regarding your Bug report > which was filed against the linux-2.6 package: > > #583082: kernel: khubd crash > > It has been closed by Jonathan Nieder <[email protected]>. > > Their explanation is attached below along with your original report. > If this explanation is unsatisfactory and you have not received a > better one in a separate message then please contact Jonathan Nieder > <[email protected]> by > replying to this email. USB drive is recognized only the first time. Does not matter which USB port I use. See attached file. Sincerely, Gabriel - -- // Gabriel VLASIU // // OpenGPG-KeyID : 0xE684206E // OpenGPG-Fingerprint: 0C3D 9F8B 725D E243 CB3C 8428 796A DB1F E684 206E // OpenGPG-URL : http://www.vlasiu.net/public.key -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iEYEARECAAYFAk8NmT4ACgkQeWrbH+aEIG486QCfVl9j0xHi199qXqU3KlQqfd1S bJAAnArEnnzOpbWIRbYcen/kI88YcF0T =nJO1 -----END PGP SIGNATURE-----Jan 11 15:58:37 mailq kernel: [ 215.496407] usb 1-3: new high-speed USB device number 2 using ehci_hcd Jan 11 15:58:37 mailq kernel: [ 215.649234] usb 1-3: New USB device found, idVendor=1005, idProduct=b113 Jan 11 15:58:37 mailq kernel: [ 215.649271] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 11 15:58:37 mailq kernel: [ 215.649303] usb 1-3: Product: USB FLASH DRIVE Jan 11 15:58:37 mailq kernel: [ 215.649327] usb 1-3: Manufacturer: Jan 11 15:58:37 mailq kernel: [ 215.649351] usb 1-3: SerialNumber: 07AB061376562D50 Jan 11 15:58:37 mailq kernel: [ 215.752110] usbcore: registered new interface driver uas Jan 11 15:58:37 mailq kernel: [ 215.781928] Initializing USB Mass Storage driver... Jan 11 15:58:37 mailq kernel: [ 215.782628] scsi2 : usb-storage 1-3:1.0 Jan 11 15:58:37 mailq kernel: [ 215.783666] usbcore: registered new interface driver usb-storage Jan 11 15:58:37 mailq kernel: [ 215.783694] USB Mass Storage support registered. Jan 11 15:58:38 mailq kernel: [ 216.878129] scsi 2:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS Jan 11 15:58:38 mailq kernel: [ 216.886126] sd 2:0:0:0: Attached scsi generic sg3 type 0 Jan 11 15:58:39 mailq kernel: [ 217.582722] sd 2:0:0:0: [sdc] 7834944 512-byte logical blocks: (4.01 GB/3.73 GiB) Jan 11 15:58:39 mailq kernel: [ 217.583813] sd 2:0:0:0: [sdc] Write Protect is off Jan 11 15:58:39 mailq kernel: [ 217.586215] sd 2:0:0:0: [sdc] No Caching mode page present Jan 11 15:58:39 mailq kernel: [ 217.586463] sd 2:0:0:0: [sdc] Assuming drive cache: write through Jan 11 15:58:39 mailq kernel: [ 217.595198] sd 2:0:0:0: [sdc] No Caching mode page present Jan 11 15:58:39 mailq kernel: [ 217.595426] sd 2:0:0:0: [sdc] Assuming drive cache: write through Jan 11 15:58:39 mailq kernel: [ 217.608801] sdc: sdc1 Jan 11 15:58:39 mailq kernel: [ 217.619205] sd 2:0:0:0: [sdc] No Caching mode page present Jan 11 15:58:39 mailq kernel: [ 217.619438] sd 2:0:0:0: [sdc] Assuming drive cache: write through Jan 11 15:58:39 mailq kernel: [ 217.619680] sd 2:0:0:0: [sdc] Attached SCSI removable disk Jan 11 15:59:06 mailq kernel: [ 244.627374] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Jan 11 15:59:25 mailq kernel: [ 263.663507] usb 1-3: USB disconnect, device number 2 Jan 11 15:59:38 mailq kernel: [ 276.671204] usb 3-1: new full-speed USB device number 2 using ohci_hcd Jan 11 15:59:38 mailq kernel: [ 276.811179] usb 3-1: device descriptor read/64, error -73 Jan 11 15:59:38 mailq kernel: [ 276.983186] hub 3-0:1.0: unable to enumerate USB device on port 1 Jan 11 15:59:39 mailq kernel: [ 277.351149] usb 1-3: new high-speed USB device number 4 using ehci_hcd Jan 11 15:59:39 mailq kernel: [ 277.488028] usb 1-3: New USB device found, idVendor=1005, idProduct=b113 Jan 11 15:59:39 mailq kernel: [ 277.488065] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 11 15:59:39 mailq kernel: [ 277.488097] usb 1-3: Product: USB FLASH DRIVE Jan 11 15:59:39 mailq kernel: [ 277.488121] usb 1-3: Manufacturer: Jan 11 15:59:39 mailq kernel: [ 277.488145] usb 1-3: SerialNumber: 07AB061376562D50 Jan 11 15:59:39 mailq kernel: [ 277.503311] scsi3 : usb-storage 1-3:1.0 Jan 11 15:59:40 mailq kernel: [ 278.596804] scsi 3:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS Jan 11 15:59:40 mailq kernel: [ 278.605258] sd 3:0:0:0: Attached scsi generic sg3 type 0 Jan 11 16:00:00 mailq kernel: [ 299.226479] usb 1-3: USB disconnect, device number 4 Jan 11 16:00:11 mailq kernel: [ 309.824466] sd 3:0:0:0: Device offlined - not ready after error recovery Jan 11 16:00:11 mailq kernel: [ 309.830118] sd 3:0:0:0: [sdc] READ CAPACITY failed Jan 11 16:00:11 mailq kernel: [ 309.830148] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jan 11 16:00:11 mailq kernel: [ 309.830192] sd 3:0:0:0: [sdc] Sense not available. Jan 11 16:00:11 mailq kernel: [ 309.830322] sd 3:0:0:0: [sdc] Write Protect is off Jan 11 16:00:11 mailq kernel: [ 309.830481] sd 3:0:0:0: [sdc] Asking for cache data failed Jan 11 16:00:11 mailq kernel: [ 309.830788] sd 3:0:0:0: [sdc] Assuming drive cache: write through Jan 11 16:00:11 mailq kernel: [ 309.844379] sd 3:0:0:0: [sdc] READ CAPACITY failed Jan 11 16:00:11 mailq kernel: [ 309.844407] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jan 11 16:00:11 mailq kernel: [ 309.844446] sd 3:0:0:0: [sdc] Sense not available. Jan 11 16:00:11 mailq kernel: [ 309.844650] sd 3:0:0:0: [sdc] Asking for cache data failed Jan 11 16:00:11 mailq kernel: [ 309.844953] sd 3:0:0:0: [sdc] Assuming drive cache: write through Jan 11 16:00:11 mailq kernel: [ 309.845264] sd 3:0:0:0: [sdc] Attached SCSI removable disk Jan 11 16:00:14 mailq kernel: [ 312.284197] usb 3-1: new full-speed USB device number 3 using ohci_hcd Jan 11 16:00:14 mailq kernel: [ 312.424168] usb 3-1: device descriptor read/64, error -73 Jan 11 16:00:14 mailq kernel: [ 312.668142] usb 3-1: device descriptor read/64, error -73 Jan 11 16:00:14 mailq kernel: [ 312.900127] usb 3-1: new full-speed USB device number 4 using ohci_hcd Jan 11 16:00:14 mailq kernel: [ 313.040111] usb 3-1: device descriptor read/64, error -73 Jan 11 16:00:15 mailq kernel: [ 313.284128] usb 3-1: device descriptor read/64, error -73 Jan 11 16:00:15 mailq kernel: [ 313.516077] usb 3-1: new full-speed USB device number 5 using ohci_hcd Jan 11 16:00:15 mailq kernel: [ 313.924041] usb 3-1: device not accepting address 5, error -73 Jan 11 16:00:15 mailq kernel: [ 314.052045] usb 3-1: new full-speed USB device number 6 using ohci_hcd Jan 11 16:00:16 mailq kernel: [ 314.459986] usb 3-1: device not accepting address 6, error -73 Jan 11 16:00:16 mailq kernel: [ 314.460325] hub 3-0:1.0: unable to enumerate USB device on port 1 Jan 11 16:00:31 mailq kernel: [ 329.802683] usb 1-3: new high-speed USB device number 6 using ehci_hcd Jan 11 16:00:46 mailq kernel: [ 344.893420] hub 1-0:1.0: unable to enumerate USB device on port 3 Jan 11 16:00:51 mailq kernel: [ 349.429008] usb 1-4: new high-speed USB device number 7 using ehci_hcd Jan 11 16:01:06 mailq kernel: [ 364.575708] usb 1-4: device descriptor read/64, error -60 Jan 11 16:01:21 mailq kernel: [ 379.770579] hub 1-0:1.0: unable to enumerate USB device on port 4 Jan 11 16:01:21 mailq kernel: [ 380.178352] usb 3-2: new full-speed USB device number 7 using ohci_hcd Jan 11 16:03:28 mailq kernel: [ 506.351302] INFO: task khubd:124 blocked for more than 120 seconds. Jan 11 16:03:28 mailq kernel: [ 506.351638] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 11 16:03:28 mailq kernel: [ 506.352025] khubd D 00000000100a62b4 0 124 2 0x48000000000 Jan 11 16:03:28 mailq kernel: [ 506.352068] Call Trace: Jan 11 16:03:28 mailq kernel: [ 506.352216] [00000000100a5704] usb_kill_urb+0xac/0xd8 [usbcore] Jan 11 16:03:28 mailq kernel: [ 506.352301] [00000000100a62b4] usb_start_wait_urb+0x60/0x94 [usbcore] Jan 11 16:03:28 mailq kernel: [ 506.352387] [00000000100a64c4] usb_control_msg+0xc4/0xec [usbcore] Jan 11 16:03:28 mailq kernel: [ 506.352466] [000000001009fd34] hub_port_init+0x244/0x748 [usbcore] Jan 11 16:03:28 mailq kernel: [ 506.352547] [00000000100a1fe8] hub_thread+0x84c/0xee8 [usbcore] Jan 11 16:03:28 mailq kernel: [ 506.352593] [0000000000475148] kthread+0x5c/0x70 Jan 11 16:03:28 mailq kernel: [ 506.352635] [000000000042a7d4] kernel_thread+0x30/0x48 Jan 11 16:03:28 mailq kernel: [ 506.352668] [00000000004753c0] kthreadd+0xa4/0xe0 Jan 11 16:05:28 mailq kernel: [ 626.340648] INFO: task khubd:124 blocked for more than 120 seconds. Jan 11 16:05:28 mailq kernel: [ 626.341028] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 11 16:05:28 mailq kernel: [ 626.341449] khubd D 00000000100a62b4 0 124 2 0x48000000000 Jan 11 16:05:28 mailq kernel: [ 626.341492] Call Trace: Jan 11 16:05:28 mailq kernel: [ 626.341640] [00000000100a5704] usb_kill_urb+0xac/0xd8 [usbcore] Jan 11 16:05:28 mailq kernel: [ 626.341725] [00000000100a62b4] usb_start_wait_urb+0x60/0x94 [usbcore] Jan 11 16:05:28 mailq kernel: [ 626.341811] [00000000100a64c4] usb_control_msg+0xc4/0xec [usbcore] Jan 11 16:05:28 mailq kernel: [ 626.341891] [000000001009fd34] hub_port_init+0x244/0x748 [usbcore] Jan 11 16:05:28 mailq kernel: [ 626.341972] [00000000100a1fe8] hub_thread+0x84c/0xee8 [usbcore] Jan 11 16:05:28 mailq kernel: [ 626.342019] [0000000000475148] kthread+0x5c/0x70 Jan 11 16:05:28 mailq kernel: [ 626.342061] [000000000042a7d4] kernel_thread+0x30/0x48 Jan 11 16:05:28 mailq kernel: [ 626.342094] [00000000004753c0] kthreadd+0xa4/0xe0 Jan 11 16:05:56 mailq shutdown[2413]: shutting down for system reboot Jan 11 16:05:57 mailq init: Switching to runlevel: 6
--- End Message ---
