Package: linux-2.6 Version: 3.2.1-1 Severity: normal I decided to upgrade the kernel from sid in order to improve the wireless driver. Unfortunately, when having started the computer and browsing the Internet, the keyboard and the touchpad suddenly froze. I saw the rate of CPU increasing to 100%. I pressed the power button to suspend, and when resuming, the keyboard was OK. I thought it must have been a kernel bug.
-- Package-specific info: ** Version: Linux version 3.2.0-1-686-pae (Debian 3.2.1-1) ([email protected]) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Thu Jan 19 10:56:51 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-1-686-pae root=UUID=4a6467bf-103c-4dd5-b8dc-bde482eb469f ro quiet ** Not tainted ** Kernel log: [ 493.864220] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd3f1d001) [ 493.864227] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xb7f0b400) [ 493.864233] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 493.864243] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 493.864251] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 493.864309] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 493.864339] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 493.864370] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 493.864400] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 493.864439] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 493.864457] ehci_hcd 0000:00:1d.7: PME# disabled [ 493.864469] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 493.864481] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x29f12401) [ 493.864488] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xb800b800) [ 493.864494] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800010, writing 0x22803030) [ 493.864500] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20060600, writing 0x200a0600) [ 493.864512] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x8100107) [ 493.864553] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2000007, writing 0x2000107) [ 493.864566] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 493.864589] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2880005) [ 493.864640] b44 0000:06:05.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 493.864661] b44 0000:06:05.0: restoring config space at offset 0x4 (was 0x0, writing 0xb8000000) [ 493.864667] b44 0000:06:05.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000) [ 493.864675] b44 0000:06:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x8100106) [ 493.864698] ipw2200 0000:06:07.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010b) [ 493.864722] ipw2200 0000:06:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xb8002000) [ 493.864729] ipw2200 0000:06:07.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008) [ 493.864738] ipw2200 0000:06:07.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900116) [ 493.864762] yenta_cardbus 0000:06:09.0: restoring config space at offset 0xf (was 0x7000100, writing 0x5800100) [ 493.864768] yenta_cardbus 0000:06:09.0: restoring config space at offset 0xe (was 0x0, writing 0x30fc) [ 493.864775] yenta_cardbus 0000:06:09.0: restoring config space at offset 0xd (was 0x0, writing 0x3000) [ 493.864782] yenta_cardbus 0000:06:09.0: restoring config space at offset 0xc (was 0x0, writing 0x34fc) [ 493.864788] yenta_cardbus 0000:06:09.0: restoring config space at offset 0xb (was 0x0, writing 0x3400) [ 493.864795] yenta_cardbus 0000:06:09.0: restoring config space at offset 0xa (was 0x0, writing 0x2ffff000) [ 493.864801] yenta_cardbus 0000:06:09.0: restoring config space at offset 0x9 (was 0x0, writing 0x2c000000) [ 493.864808] yenta_cardbus 0000:06:09.0: restoring config space at offset 0x8 (was 0x0, writing 0x33fff000) [ 493.864814] yenta_cardbus 0000:06:09.0: restoring config space at offset 0x7 (was 0x0, writing 0x30000000) [ 493.864821] yenta_cardbus 0000:06:09.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00a0706) [ 493.864831] yenta_cardbus 0000:06:09.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 493.864876] firewire_ohci 0000:06:09.1: restoring config space at offset 0xf (was 0x4020200, writing 0x40202ff) [ 493.864897] firewire_ohci 0000:06:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xb8003000) [ 493.864907] firewire_ohci 0000:06:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 493.864932] sdhci-pci 0000:06:09.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff) [ 493.864954] sdhci-pci 0000:06:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xb8003800) [ 493.864961] sdhci-pci 0000:06:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802000) [ 493.864969] sdhci-pci 0000:06:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 493.864993] r592 0000:06:09.3: restoring config space at offset 0xf (was 0x300, writing 0x3ff) [ 493.865016] r592 0000:06:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xb8003c00) [ 493.865026] r592 0000:06:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102) [ 493.865223] PM: early resume of devices complete after 1.125 msecs [ 493.865344] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 493.865349] i915 0000:00:02.0: setting latency timer to 64 [ 493.894054] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 493.894061] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 493.894089] usb usb2: root hub lost power or was reset [ 493.894103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 493.894110] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 493.894133] usb usb3: root hub lost power or was reset [ 493.894145] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 493.894152] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 493.894176] usb usb4: root hub lost power or was reset [ 493.894188] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 493.894194] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 493.894218] usb usb5: root hub lost power or was reset [ 493.894232] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 493.894239] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 493.894266] pci 0000:00:1e.0: setting latency timer to 64 [ 493.894277] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 493.894282] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 493.894304] b44 0000:06:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 493.894319] eth1: Coming out of suspend... [ 493.894327] ipw2200 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 493.894364] firewire_ohci 0000:06:09.1: power state changed by ACPI to D0 [ 493.894370] firewire_ohci 0000:06:09.1: power state changed by ACPI to D0 [ 493.895315] ata2: port disabled--ignoring [ 493.895348] sdhci-pci 0000:06:09.2: power state changed by ACPI to D0 [ 493.895354] sdhci-pci 0000:06:09.2: power state changed by ACPI to D0 [ 493.895361] sdhci-pci 0000:06:09.2: power state changed by ACPI to D0 [ 493.895365] sdhci-pci 0000:06:09.2: power state changed by ACPI to D0 [ 493.895373] sdhci-pci 0000:06:09.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 493.895378] sdhci-pci 0000:06:09.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 493.961969] sd 0:0:0:0: [sda] Starting disk [ 494.026254] firewire_core: skipped bus generations, destroying all nodes [ 494.420037] usb 2-2: reset low-speed USB device number 2 using uhci_hcd [ 494.524046] firewire_core: rediscovered device fw0 [ 495.052486] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 495.052491] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out [ 495.060395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 495.060399] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 495.132474] ata1.00: configured for UDMA/100 [ 495.172283] ata1.01: configured for UDMA/33 [ 495.372107] PM: resume of devices complete after 1506.824 msecs [ 495.372185] PM: Finishing wakeup. [ 495.372187] Restarting tasks ... done. [ 495.390228] video LNXVIDEO:00: Restoring backlight state [ 495.444109] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 495.447603] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 495.976121] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 506.200033] eth1: no IPv6 routers present [ 835.856072] teredo: no IPv6 routers present ** Model information not available ** Loaded modules: michael_mic arc4 ecb lib80211_crypt_tkip cryptd aes_i586 aes_generic lib80211_crypt_ccmp tun cpufreq_powersave cpufreq_conservative acpi_cpufreq cpufreq_stats cpufreq_userspace speedstep_lib mperf bridge stp bnep bluetooth fuse ext3 jbd loop firewire_sbp2 ipw2200 i915 joydev libipw cfg80211 rfkill drm_kms_helper drm i2c_algo_bit i2c_i801 r592 yenta_socket memstick pcmcia_rsrc lib80211 tpm_tis rng_core i2c_core psmouse tpm processor button battery pcspkr ac tpm_bios video power_supply evdev serio_raw ext4 mbcache jbd2 crc16 usbhid hid sg sr_mod sd_mod cdrom crc_t10dif ata_generic uhci_hcd ata_piix libata ehci_hcd scsi_mod b44 ssb firewire_ohci usbcore firewire_core fan sdhci_pci sdhci mmc_core pcmcia pcmcia_core mii crc_itu_t thermal thermal_sys usb_common ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo:<LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:<NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:00:f0:7e:c3:5c brd ff:ff:ff:ff:ff:ff 3: eth1:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:13:ce:f6:7a:dd brd ff:ff:ff:ff:ff:ff inet 192.168.0.103/24 brd 192.168.0.255 scope global eth1 inet6 fe80::213:ceff:fef6:7add/64 scope link valid_lft forever preferred_lft forever 4: pan0:<BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 06:7e:1f:21:39:ee brd ff:ff:ff:ff:ff:ff 7: teredo:<POINTOPOINT,MULTICAST,NOARP> mtu 1280 qdisc pfifo_fast state DOWN qlen 500 link/none *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth1: 2698214 4281 4 4 0 0 0 0 1067659 4867 0 0 0 0 0 0 teredo: 0 0 0 0 0 0 0 0 144 3 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 4260 total packets received 3 with invalid addresses 0 forwarded 0 incoming packets discarded 4232 incoming packets delivered 4804 requests sent out 29 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 235 active connections openings 0 passive connection openings 10 failed connection attempts 4 connection resets received 5 connections established 3734 segments received 3823 segments send out 463 segments retransmited 0 bad segments received. 18 resets sent Udp: 458 packets received 0 packets to unknown port received. 0 packet receive errors 521 packets sent UdpLite: TcpExt: 76 TCP sockets finished time wait in fast timer 95 delayed acks sent Quick ack mode was activated 208 times 1563 packet headers predicted 537 acknowledgments not containing data payload received 164 predicted acknowledgments 4 times recovered from packet loss by selective acknowledgements 39 congestion windows recovered without slow start after partial ack 4 TCP data loss events 41 timeouts after SACK recovery 1 timeouts in loss state 5 fast retransmits 3 forward retransmits 12 retransmits in slow start 184 other TCP timeouts 1 SACK retransmits failed 208 DSACKs sent for old packets 1 DSACKs sent for out of order packets 9 DSACKs received 5 connections reset due to unexpected data 2 connections reset due to early user close 12 connections aborted due to timeout TCPDSACKIgnoredNoUndo: 4 TCPSackShiftFallback: 57 IpExt: InMcastPkts: 31 OutMcastPkts: 38 InBcastPkts: 26 InOctets: 2641474 OutOctets: 1021161 InMcastOctets: 5538 OutMcastOctets: 6111 InBcastOctets: 2400 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Capabilities:<access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at<unassigned> [disabled] Capabilities:<access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Region 0: Memory at 22000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities:<access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: b4000000-b7ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:<access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K] Capabilities:<access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: b8000000-b80fffff Prefetchable memory behind bridge: 0000000024000000-0000000029ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort+<SERR-<PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:<access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: i801_smbus 06:05.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c01a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 22 Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=8K] [virtual] Expansion ROM at 24000000 [disabled] [size=64K] Capabilities:<access denied> Kernel driver in use: b44 06:07.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Samsung P35 integrated WLAN [8086:2731] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at b8002000 (32-bit, non-prefetchable) [size=4K] Capabilities:<access denied> Kernel driver in use: ipw2200 06:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3) Subsystem: Samsung Electronics Co Ltd Device [144d:c502] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 000da000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-33fff000 (prefetchable) Memory window 1: 2c000000-2ffff000 I/O window 0: 00003400-000034ff I/O window 1: 00003000-000030ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort->Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:09.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c018] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at b8003000 (32-bit, non-prefetchable) [size=2K] Capabilities:<access denied> Kernel driver in use: firewire_ohci 06:09.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17) Subsystem: Samsung Electronics Co Ltd X20 IV [144d:c018] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Latency: 32 Interrupt: pin C routed to IRQ 18 Region 0: Memory at b8003800 (32-bit, non-prefetchable) [size=256] Capabilities:<access denied> Kernel driver in use: sdhci-pci 06:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08) Subsystem: Samsung Electronics Co Ltd X20 IV [144d:c018] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at b8003c00 (32-bit, non-prefetchable) [size=256] Capabilities:<access denied> Kernel driver in use: r592 ** Sound cards: -- System Information: Debian Release: 6.0.3 APT prefers stable APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates') Architecture: i386 (i686) Kernel: Linux 3.2.0-1-686-pae (SMP w/1 CPU core) Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs ii linux-base 3.3~bpo60+1 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-3.2.0-1-686-pae recommends: pn firmware-linux-free<none> (no description available) ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-3.2.0-1-686-pae suggests: ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version pn linux-doc-3.2<none> (no description available) Versions of packages linux-image-3.2.0-1-686-pae is related to: pn firmware-atheros<none> (no description available) pn firmware-bnx2<none> (no description available) pn firmware-bnx2x<none> (no description available) pn firmware-brcm80211<none> (no description available) pn firmware-intelwimax<none> (no description available) ii firmware-ipw2x00 0.28+squeeze1 Binary firmware for Intel Pro Wire pn firmware-ivtv<none> (no description available) pn firmware-iwlwifi<none> (no description available) pn firmware-libertas<none> (no description available) pn firmware-linux<none> (no description available) pn firmware-linux-nonfree<none> (no description available) pn firmware-myricom<none> (no description available) pn firmware-netxen<none> (no description available) pn firmware-qlogic<none> (no description available) pn firmware-ralink<none> (no description available) pn firmware-realtek<none> (no description available) pn xen-hypervisor<none> (no description available) -- debconf information: linux-image-3.2.0-1-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-1-686-pae/postinst/depmod-error-initrd-3.2.0-1-686-pae: false linux-image-3.2.0-1-686-pae/prerm/removing-running-kernel-3.2.0-1-686-pae: true linux-image-3.2.0-1-686-pae/postinst/missing-firmware-3.2.0-1-686-pae: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
