Package: linux-2.6 Version: 3.2.4-1 Severity: normal File: ath9k Hello dear maintainers,
after upgrading to löinux-image 3.2.0 I detected a problem with my wireless router. I suppose, it is related to kernel module "ath9k", which is responsible for my Atheros wireless card in my EEEPC 1005 HGO. I tried two ways of connecting. The first one is using the file /etc/network/interfaces. As in the past, I am using a static IP. Connection is working, I get the IP, but I can never ping to the gateway. The other way is using wicd. With wicd, it is showing me the connection, but never gets an IP. Ping does not work, too, and the line test of wicd fails. WPA/WPA2 is working with this module like a charme. Also another computer with an Atheros card, but "ath5k" module, can connect on the same router with WEP like a charme. Thus I guess, the module "ath9k" of the kernel might be buggy. Besides: I know, WEP is outdated, but I use an older router with only WEP availablke. But as its PA is defective and sending only just with 1mW (range approx. 5m) this is the best protection against sniffers. So I would like to use it further more. Thank you for reading my message! Best regards Hans -- Package-specific info: ** Version: Linux version 3.2.0-1-686-pae (Debian 3.2.4-1) ([email protected]) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 23:52:49 UTC 2012 ** Command line: root=UUID=ea6e761d-8e68-49a0-8674-0cc112025d91 ro quiet acpi_osi="Linux" ** Tainted: W (512) * Taint on warning. ** Kernel log: [58384.155272] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3) [58384.194872] cfg80211: Calling CRDA to update world regulatory domain [58385.399068] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58385.506667] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58386.076090] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [58386.099541] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [58386.316316] atl1c 0000:01:00.0: Error get phy ID [58386.317416] ADDRCONF(NETDEV_UP): eth0: link is not ready [58546.794024] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58547.400108] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [58547.424283] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [58547.648328] atl1c 0000:01:00.0: Error get phy ID [58547.649394] ADDRCONF(NETDEV_UP): eth0: link is not ready [58547.927157] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58550.270757] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1) [58550.272671] wlan0: authenticated [58550.272765] wlan0: associate with 00:06:25:ed:1f:e7 (try 1) [58550.274975] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3) [58550.274985] wlan0: associated [58550.275468] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [58561.128129] wlan0: no IPv6 routers present [58590.174273] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3) [58590.214820] cfg80211: Calling CRDA to update world regulatory domain [58594.398407] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58594.511036] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58595.092116] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [58595.115045] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [58595.332340] atl1c 0000:01:00.0: Error get phy ID [58595.333415] ADDRCONF(NETDEV_UP): eth0: link is not ready [58750.734408] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58751.304110] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [58751.328515] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [58751.548340] atl1c 0000:01:00.0: Error get phy ID [58751.549416] ADDRCONF(NETDEV_UP): eth0: link is not ready [58751.860093] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58754.194671] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1) [58754.198465] wlan0: authenticated [58754.198598] wlan0: associate with 00:06:25:ed:1f:e7 (try 1) [58754.201028] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3) [58754.201043] wlan0: associated [58754.201782] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [58764.752091] wlan0: no IPv6 routers present [58794.113219] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3) [58794.154772] cfg80211: Calling CRDA to update world regulatory domain [58798.388367] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58798.501233] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58799.112130] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [58799.203751] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [58799.420311] atl1c 0000:01:00.0: Error get phy ID [58799.421380] ADDRCONF(NETDEV_UP): eth0: link is not ready [58954.727020] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58955.340103] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [58955.364512] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [58955.584322] atl1c 0000:01:00.0: Error get phy ID [58955.585370] ADDRCONF(NETDEV_UP): eth0: link is not ready [58955.904477] ADDRCONF(NETDEV_UP): wlan0: link is not ready [58958.230734] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1) [58958.232914] wlan0: authenticated [58958.233005] wlan0: associate with 00:06:25:ed:1f:e7 (try 1) [58958.235491] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3) [58958.235502] wlan0: associated [58958.236357] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [58968.576059] wlan0: no IPv6 routers present [58997.278910] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3) [58997.315721] cfg80211: Calling CRDA to update world regulatory domain [59002.321206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59002.439755] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59003.020106] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [59003.043621] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [59003.260308] atl1c 0000:01:00.0: Error get phy ID [59003.261366] ADDRCONF(NETDEV_UP): eth0: link is not ready [59052.863433] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59053.436121] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [59053.459375] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [59053.676337] atl1c 0000:01:00.0: Error get phy ID [59053.679466] ADDRCONF(NETDEV_UP): eth0: link is not ready [59054.001244] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59056.352267] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1) [59056.354529] wlan0: authenticated [59056.354625] wlan0: associate with 00:06:25:ed:1f:e7 (try 1) [59056.357106] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3) [59056.357117] wlan0: associated [59056.357655] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [59066.432079] wlan0: no IPv6 routers present [59081.715204] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3) [59081.743025] cfg80211: Calling CRDA to update world regulatory domain [59086.574255] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59204.343146] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59204.968120] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second [59204.992316] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X [59205.212321] atl1c 0000:01:00.0: Error get phy ID [59205.213418] ADDRCONF(NETDEV_UP): eth0: link is not ready [59205.574773] ADDRCONF(NETDEV_UP): wlan0: link is not ready [59208.032733] wlan0: authenticate with 00:24:fe:12:bf:34 (try 1) [59208.034640] wlan0: authenticated [59208.034706] wlan0: associate with 00:24:fe:12:bf:34 (try 1) [59208.038637] wlan0: RX AssocResp from 00:24:fe:12:bf:34 (capab=0x411 status=0 aid=1) [59208.038651] wlan0: associated [59208.039429] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [59218.880077] wlan0: no IPv6 routers present ** Model information not available ** Loaded modules: iptable_filter ip_tables x_tables ath9k snd_hrtimer nfnetlink_log nfnetlink acpi_cpufreq mperf cpufreq_stats cpufreq_powersave cpufreq_userspace cpufreq_conservative irda crc_ccitt decnet parport_pc ppdev lp parport rfcomm bnep uinput fan fuse ext2 sbs sbshc max6650 coretemp gspca_sn9c20x gspca_main loop atl1 mii lrw gf128mul snd_hda_codec_realtek option arc4 usb_wwan snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss i915 snd_mixer_oss snd_pcm joydev uvcvideo snd_seq_midi usbserial snd_rawmidi btusb videodev bluetooth mac80211 snd_seq_midi_event media drm_kms_helper iTCO_wdt crc16 snd_seq snd_timer drm ath9k_common iTCO_vendor_support snd_seq_device ath9k_hw ac ath rng_core cfg80211 evdev i2c_algo_bit snd battery power_supply soundcore snd_page_alloc psmouse i2c_core serio_raw video eeepc_laptop sparse_keymap rfkill pci_hotplug button processor ext3 mbcache jbd sha256_generic dm_crypt dm_mod cryptd aes_i586 aes_generic usb_storage uas sd_mod crc_t10dif ahci libahci libata uhci_hcd scsi_mod thermal thermal_sys ehci_hcd usbcore atl1c usb_common ** Network interface configuration: -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.2.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.2.0-1-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-26 Versions of packages linux-image-3.2.0-1-686-pae suggests: pn extlinux 2:4.05+dfsg-2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-1-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux 0.35 pn firmware-linux-nonfree 0.35 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-1-686-pae/postinst/missing-firmware-3.2.0-1-686-pae: linux-image-3.2.0-1-686-pae/prerm/removing-running-kernel-3.2.0-1-686-pae: true linux-image-3.2.0-1-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-1-686-pae/postinst/depmod-error-initrd-3.2.0-1-686-pae: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20120211134902.8470.30911.reportbug@localhost
