Package: linux-2.6 Version: 2.6.32-35squeeze2 Severity: normal
enabling ksm by echo 1 > /sys/kernel/mm/ksm/run has no effect full_scans are always 0, no increment in any of the other variables -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-35squeeze2) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:23:16 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=49a2baa4-c4fb-4b25-a847-da38aabf6eb4 ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [1888762.816160] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00 [1888762.816185] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in [1888762.816188] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [1888762.816195] ata1.00: status: { DRDY } [1888762.816207] ata1: hard resetting link [1888763.136059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [1888763.160243] ata1.00: configured for UDMA/100 [1888763.165702] ata1: EH complete [1888793.816223] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [1888793.816236] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00 [1888793.816260] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in [1888793.816264] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [1888793.816270] ata1.00: status: { DRDY } [1888793.816284] ata1: hard resetting link [1888794.136058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [1888794.160243] ata1.00: configured for UDMA/100 [1888794.160859] ata1: EH complete [1888824.816182] ata1.00: limiting speed to UDMA/66:PIO4 [1888824.816192] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [1888824.816202] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00 [1888824.816226] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in [1888824.816230] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [1888824.816236] ata1.00: status: { DRDY } [1888824.816249] ata1: hard resetting link [1888825.136058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [1888825.160243] ata1.00: configured for UDMA/66 [1888825.160812] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [1888825.160820] sr 0:0:0:0: [sr0] Sense Key : Aborted Command [current] [descriptor] [1888825.160827] Descriptor sense data with sense descriptors (in hex): [1888825.160831] 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 02 00 00 [1888825.160845] 00 08 00 00 a0 40 [1888825.160853] sr 0:0:0:0: [sr0] Add. Sense: No additional sense information [1888825.160860] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 7e 61 43 00 00 01 00 [1888825.160874] end_request: I/O error, dev sr0, sector 33129740 [1888825.160907] ata1: EH complete [1888855.816222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [1888855.816235] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 05 2c 00 00 01 00 [1888855.816259] ata1.00: cmd a0/01:00:00:00:08/00:00:00:00:00/a0 tag 0 dma 2048 in [1888855.816263] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [1888855.816269] ata1.00: status: { DRDY } [1888855.816283] ata1: hard resetting link [1888856.136058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [1888856.160244] ata1.00: configured for UDMA/66 [1888856.160811] ata1: EH complete [1898559.432027] usb 1-6: new high speed USB device using ehci_hcd and address 4 [1898560.344047] hub 1-0:1.0: unable to enumerate USB device on port 6 [1898560.716021] usb 4-2: new full speed USB device using ohci_hcd and address 2 [1898560.918991] usb 4-2: not running at top speed; connect to a high speed hub [1898560.942991] usb 4-2: New USB device found, idVendor=1949, idProduct=0004 [1898560.942998] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [1898560.943004] usb 4-2: Product: Amazon Kindle [1898560.943008] usb 4-2: Manufacturer: Amazon [1898560.943012] usb 4-2: SerialNumber: B008D0A112830JDV [1898560.944961] usb 4-2: configuration #1 chosen from 1 choice [1898561.378518] Initializing USB Mass Storage driver... [1898561.378723] scsi7 : SCSI emulation for USB Mass Storage devices [1898561.378972] usbcore: registered new interface driver usb-storage [1898561.378979] USB Mass Storage support registered. [1898561.382766] usb-storage: device found at 2 [1898561.382772] usb-storage: waiting for device to settle before scanning [1898566.382615] usb-storage: device scan complete [1898566.389592] scsi 7:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2 [1898566.392415] sd 7:0:0:0: Attached scsi generic sg5 type 0 [1898566.416569] sd 7:0:0:0: [sdc] 6410688 512-byte logical blocks: (3.28 GB/3.05 GiB) [1898566.534602] sd 7:0:0:0: [sdc] Write Protect is off [1898566.534611] sd 7:0:0:0: [sdc] Mode Sense: 0f 00 00 00 [1898566.534616] sd 7:0:0:0: [sdc] Assuming drive cache: write through [1898566.662540] sd 7:0:0:0: [sdc] Assuming drive cache: write through [1898566.662551] sdc: sdc1 [1898566.802563] sd 7:0:0:0: [sdc] Assuming drive cache: write through [1898566.802575] sd 7:0:0:0: [sdc] Attached SCSI removable disk [1898658.694107] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [1898678.752197] usb 4-2: USB disconnect, address 2 [1898785.692024] usb 1-6: new high speed USB device using ehci_hcd and address 5 [1898786.496041] hub 1-0:1.0: unable to enumerate USB device on port 6 [1898786.868033] usb 4-2: new full speed USB device using ohci_hcd and address 3 [1898787.070992] usb 4-2: not running at top speed; connect to a high speed hub [1898787.094992] usb 4-2: New USB device found, idVendor=1949, idProduct=0004 [1898787.094999] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [1898787.095004] usb 4-2: Product: Amazon Kindle [1898787.095008] usb 4-2: Manufacturer: Amazon [1898787.095012] usb 4-2: SerialNumber: B008D0A112830JDV [1898787.097064] usb 4-2: configuration #1 chosen from 1 choice [1898787.107372] scsi8 : SCSI emulation for USB Mass Storage devices [1898787.109762] usb-storage: device found at 3 [1898787.109768] usb-storage: waiting for device to settle before scanning [1898792.110652] usb-storage: device scan complete [1898792.117640] scsi 8:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2 [1898792.120418] sd 8:0:0:0: Attached scsi generic sg5 type 0 [1898792.144703] sd 8:0:0:0: [sdc] 6410688 512-byte logical blocks: (3.28 GB/3.05 GiB) [1898792.254647] sd 8:0:0:0: [sdc] Write Protect is off [1898792.254657] sd 8:0:0:0: [sdc] Mode Sense: 0f 00 00 00 [1898792.254662] sd 8:0:0:0: [sdc] Assuming drive cache: write through [1898792.384621] sd 8:0:0:0: [sdc] Assuming drive cache: write through [1898792.384635] sdc: sdc1 [1898792.554584] sd 8:0:0:0: [sdc] Assuming drive cache: write through [1898792.554597] sd 8:0:0:0: [sdc] Attached SCSI removable disk [1898793.624500] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [1898840.434895] usb 4-2: USB disconnect, address 3 [1910603.596222] UDF-fs INFO UDF: Mounting volume 'LinuxUDF', timestamp 2009/09/21 19:22 (1000) ** Model information sys_vendor: product_name: product_version: 1.0 chassis_vendor: chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: 080012 board_vendor: board_name: board_version: 1.0 ** Loaded modules: Module Size Used by nls_utf8 1208 0 nls_cp437 5817 0 vfat 7900 0 fat 40070 1 vfat usb_storage 39961 0 udf 66692 0 crc_itu_t 1307 1 udf autofs4 20821 4 cpufreq_conservative 5162 1 cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 ppdev 5030 0 lp 7462 0 tun 10860 2 sit 8176 0 tunnel4 1973 1 sit sco 7225 2 bridge 39662 0 stp 1440 1 bridge bnep 9443 2 l2cap 24752 3 bnep crc16 1319 1 l2cap bluetooth 41843 5 sco,bnep,l2cap rfkill 13060 2 bluetooth binfmt_misc 6447 1 fuse 50940 1 nfsd 254974 13 exportfs 3186 1 nfsd nfs 241402 0 lockd 57651 2 nfsd,nfs fscache 29882 1 nfs nfs_acl 2031 2 nfsd,nfs auth_rpcgss 33492 2 nfsd,nfs sunrpc 161701 17 nfsd,nfs,lockd,nfs_acl,auth_rpcgss powernow_k8 10978 0 loop 11799 0 snd_intel8x0 24218 1 snd_ac97_codec 99186 1 snd_intel8x0 ac97_bus 1086 1 snd_ac97_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60503 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi nvidia 10670090 28 snd_seq_midi_event 4628 1 snd_seq_midi i2c_core 15835 1 nvidia snd_seq 42913 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 18855 1 snd 46542 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device pcspkr 1699 0 evdev 7352 11 psmouse 49937 0 shpchp 26264 0 parport 27954 3 ppdev,lp,parport_pc edac_core 29261 0 edac_mce_amd 6449 0 soundcore 4598 1 snd k8temp 3283 0 serio_raw 3752 0 pci_hotplug 21203 1 shpchp button 4650 0 snd_page_alloc 6265 2 snd_intel8x0,snd_pcm processor 29951 1 powernow_k8 ext3 106726 3 jbd 37133 1 ext3 mbcache 5050 1 ext3 raid1 18431 2 raid0 5517 1 md_mod 73872 5 raid1,raid0 sg 24085 0 sr_mod 12602 0 cdrom 29415 1 sr_mod sd_mod 29937 8 crc_t10dif 1276 1 sd_mod usbhid 33324 1 ata_generic 3239 0 hid 63273 1 usbhid sata_sis 3730 6 ohci_hcd 19359 0 pata_sis 9639 1 sata_sis sata_via 7944 0 thermal 11674 0 ehci_hcd 32129 0 thermal_sys 11942 2 processor,thermal sis190 13642 0 mii 3210 1 sis190 libata 133808 4 ata_generic,sata_sis,pata_sis,sata_via e1000 85581 0 scsi_mod 126565 5 usb_storage,sg,sr_mod,sd_mod,libata usbcore 122562 6 usb_storage,usbhid,ohci_hcd,ehci_hcd nls_base 6377 6 nls_utf8,nls_cp437,vfat,fat,udf,usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 761/M761 Host [1039:0761] (rev 02) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-amd64 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fc000000-febfffff Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] [1039:0965] (rev 48) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master]) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Interrupt: pin ? routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: pata_sis 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Elitegroup Computer Systems Device [1019:1880] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at e400 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 64 (20000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 64 (20000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin C routed to IRQ 22 Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 23 Region 0: Memory at fbffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 190 Ethernet Adapter [1039:0190] Subsystem: Silicon Integrated Systems [SiS] Device [1039:0191] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbffbc00 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at e000 [size=128] Capabilities: <access denied> Kernel driver in use: sis190 00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:08.0 IDE interface [0101]: Silicon Integrated Systems [SiS] Device [1039:0183] (rev 01) (prog-if 85 [Master SecO PriO]) Subsystem: Elitegroup Computer Systems Device [1019:0131] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d800 [size=8] Region 1: I/O ports at d400 [size=4] Region 2: I/O ports at d000 [size=8] Region 3: I/O ports at c800 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: I/O ports at <unassigned> Capabilities: <access denied> Kernel driver in use: sata_sis 00:09.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at fbf80000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at b800 [size=64] Expansion ROM at fbf40000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: e1000 00:09.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fbf20000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at b400 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 00:0a.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50) Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at b000 [size=16] Region 1: I/O ports at a800 [size=16] Region 2: I/O ports at a400 [size=16] Region 3: I/O ports at a000 [size=16] Region 4: I/O ports at 9800 [size=32] Region 5: I/O ports at 9400 [size=256] Expansion ROM at fbfe0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: sata_via 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8309] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0463:ffff MGE UPS Systems UPS Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-35squeeze2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-35squeeze2 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20111004143839.24122.22542.reportbug@localhost
