Your message dated Mon, 23 Apr 2012 02:53:45 +0100 with message-id <1335146025.4056.15.camel@deadeye> and subject line Re: linux-image-2.6.24-etchnhalf.1-686: raid rebuild generates 'BUG: soft lockup - CPU#0 stuck for 11s! [md0_raid1:1207]' has caused the Debian Bug report #514054, regarding linux-image-2.6.24-etchnhalf.1-686: raid rebuild generates 'BUG: soft lockup - CPU#0 stuck for 11s! [md0_raid1:1207]' to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 514054: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514054 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-image-2.6.24-etchnhalf.1-686 Version: 2.6.24-6~etchnhalf.7 Severity: grave Justification: causes non-serious data loss kernel logs were filled with the following messages: Feb 1 01:06:01 pioneer kernel: md: data-check of RAID array md0 Feb 1 01:06:01 pioneer kernel: md: minimum _guaranteed_ speed: 1000 KB/sec/disk. Feb 1 01:06:01 pioneer kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. Feb 1 01:06:01 pioneer kernel: md: delaying data-check of md1 until md0 has finished (they share one or more physical units) Feb 1 01:06:44 pioneer kernel: BUG: soft lockup - CPU#0 stuck for 11s! [md0_raid1:1207] Feb 1 01:06:44 pioneer kernel: Feb 1 01:06:44 pioneer kernel: Pid: 1207, comm: md0_raid1 Not tainted (2.6.24-etchnhalf.1-686 #1) Feb 1 01:06:44 pioneer kernel: EIP: 0060:[<c01e23af>] EFLAGS: 00000246 CPU: 0 Feb 1 01:06:44 pioneer kernel: EIP is at memcmp+0x14/0x22 Feb 1 01:06:44 pioneer kernel: EAX: 00000000 EBX: f77abbf6 ECX: d03c5bf6 EDX: 00000000 Feb 1 01:06:44 pioneer kernel: ESI: 0000040a EDI: 00000090 EBP: d7234100 ESP: df9ffec4 Feb 1 01:06:44 pioneer kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 1 01:06:44 pioneer kernel: CR0: 8005003b CR2: b7dab024 CR3: 1f86a000 CR4: 000006d0 Feb 1 01:06:44 pioneer kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Feb 1 01:06:44 pioneer kernel: DR6: ffff0ff0 DR7: 00000400 Feb 1 01:06:44 pioneer kernel: [<f896a1b4>] raid1d+0x2cb/0xcf1 [raid1] Feb 1 01:06:44 pioneer kernel: [<c011da32>] update_curr+0x62/0xef Feb 1 01:06:44 pioneer kernel: [<c02bd172>] schedule_timeout+0x13/0x8d Feb 1 01:06:44 pioneer kernel: [<c0104988>] apic_timer_interrupt+0x28/0x30 Feb 1 01:06:44 pioneer kernel: [<f89b1857>] md_thread+0xb9/0xcf [md_mod] Feb 1 01:06:44 pioneer kernel: [<c013548d>] autoremove_wake_function+0x0/0x35 Feb 1 01:06:44 pioneer kernel: [<f89b179e>] md_thread+0x0/0xcf [md_mod] Feb 1 01:06:44 pioneer kernel: [<c01353c6>] kthread+0x38/0x5e Feb 1 01:06:44 pioneer kernel: [<c013538e>] kthread+0x0/0x5e Feb 1 01:06:44 pioneer kernel: [<c0104b17>] kernel_thread_helper+0x7/0x10 Feb 1 01:06:44 pioneer kernel: ======================= Feb 1 01:09:31 pioneer kernel: BUG: soft lockup - CPU#1 stuck for 11s! [md0_raid1:1207] Feb 1 01:09:31 pioneer kernel: Feb 1 01:09:31 pioneer kernel: Pid: 1207, comm: md0_raid1 Not tainted (2.6.24-etchnhalf.1-686 #1) Feb 1 01:09:31 pioneer kernel: EIP: 0060:[<c01e23b6>] EFLAGS: 00000202 CPU: 1 Feb 1 01:09:31 pioneer kernel: EIP is at memcmp+0x1b/0x22 Feb 1 01:09:31 pioneer kernel: EAX: 00000000 EBX: d7c8d60f ECX: ed6d860f EDX: 00000000 Feb 1 01:09:31 pioneer kernel: ESI: 000009f1 EDI: 00000084 EBP: f04b3a80 ESP: df9ffec4 Feb 1 01:09:31 pioneer kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 1 01:09:31 pioneer kernel: CR0: 8005003b CR2: b7fb4000 CR3: 1f809000 CR4: 000006d0 Feb 1 01:09:31 pioneer kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Feb 1 01:09:31 pioneer kernel: DR6: ffff0ff0 DR7: 00000400 Feb 1 01:09:31 pioneer kernel: [<f896a1b4>] raid1d+0x2cb/0xcf1 [raid1] Feb 1 01:09:31 pioneer kernel: [<c02bd172>] schedule_timeout+0x13/0x8d Feb 1 01:09:31 pioneer kernel: [<c0104988>] apic_timer_interrupt+0x28/0x30 Feb 1 01:09:31 pioneer kernel: [<f89b1857>] md_thread+0xb9/0xcf [md_mod] Feb 1 01:09:31 pioneer kernel: [<c013548d>] autoremove_wake_function+0x0/0x35 Feb 1 01:09:31 pioneer kernel: [<f89b179e>] md_thread+0x0/0xcf [md_mod] Feb 1 01:09:31 pioneer kernel: [<c01353c6>] kthread+0x38/0x5e Feb 1 01:09:31 pioneer kernel: [<c013538e>] kthread+0x0/0x5e Feb 1 01:09:31 pioneer kernel: [<c0104b17>] kernel_thread_helper+0x7/0x10 Feb 1 01:09:31 pioneer kernel: ======================= Feb 1 01:11:01 pioneer mdadm: Rebuild20 event detected on md device /dev/md0 Feb 1 01:13:32 pioneer kernel: BUG: soft lockup - CPU#1 stuck for 11s! [md0_raid1:1207] Feb 1 01:13:32 pioneer kernel: Feb 1 01:13:32 pioneer kernel: Pid: 1207, comm: md0_raid1 Not tainted (2.6.24-etchnhalf.1-686 #1) Feb 1 01:13:32 pioneer kernel: EIP: 0060:[<c01e23b2>] EFLAGS: 00000286 CPU: 1 Feb 1 01:13:32 pioneer kernel: EIP is at memcmp+0x17/0x22 Feb 1 01:13:32 pioneer kernel: EAX: 00000000 EBX: e2b69fd7 ECX: f178dfd6 EDX: 00000000 Feb 1 01:13:32 pioneer kernel: ESI: 0000002a EDI: 0000006c EBP: f04b3280 ESP: df9ffec4 Feb 1 01:13:32 pioneer kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 1 01:13:32 pioneer kernel: CR0: 8005003b CR2: bfff5f30 CR3: 1f80f000 CR4: 000006d0 Feb 1 01:13:32 pioneer kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Feb 1 01:13:32 pioneer kernel: DR6: ffff0ff0 DR7: 00000400 Feb 1 01:13:32 pioneer kernel: [<f896a1b4>] raid1d+0x2cb/0xcf1 [raid1] Feb 1 01:13:32 pioneer kernel: [<c02bd172>] schedule_timeout+0x13/0x8d Feb 1 01:13:32 pioneer kernel: [<c0104988>] apic_timer_interrupt+0x28/0x30 Feb 1 01:13:32 pioneer kernel: [<c02b007b>] xfrm_find_algo+0x37/0x63 Feb 1 01:13:32 pioneer kernel: [<f89b1857>] md_thread+0xb9/0xcf [md_mod] Feb 1 01:13:32 pioneer kernel: [<c013548d>] autoremove_wake_function+0x0/0x35 Feb 1 01:13:32 pioneer kernel: [<f89b179e>] md_thread+0x0/0xcf [md_mod] Feb 1 01:13:32 pioneer kernel: [<c01353c6>] kthread+0x38/0x5e Feb 1 01:13:32 pioneer kernel: [<c013538e>] kthread+0x0/0x5e Feb 1 01:13:32 pioneer kernel: [<c0104b17>] kernel_thread_helper+0x7/0x10 Feb 1 01:13:32 pioneer kernel: ======================= Feb 1 01:15:01 pioneer mdadm: Rebuild40 event detected on md device /dev/md0 Feb 1 01:16:10 pioneer kernel: BUG: soft lockup - CPU#0 stuck for 11s! [md0_raid1:1207] Feb 1 01:16:10 pioneer kernel: Feb 1 01:16:10 pioneer kernel: Pid: 1207, comm: md0_raid1 Not tainted (2.6.24-etchnhalf.1-686 #1) Feb 1 01:16:10 pioneer kernel: EIP: 0060:[<c01e23a8>] EFLAGS: 00000202 CPU: 0 Feb 1 01:16:10 pioneer kernel: EIP is at memcmp+0xd/0x22 Feb 1 01:16:10 pioneer kernel: EAX: 00000000 EBX: f66562c3 ECX: e66ee2c3 EDX: 00000000 Feb 1 01:16:10 pioneer kernel: ESI: 00000d3d EDI: 00000030 EBP: ede6dd00 ESP: df9ffec4 Feb 1 01:16:10 pioneer kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 1 01:16:10 pioneer kernel: CR0: 8005003b CR2: bfa54f80 CR3: 1f86a000 CR4: 000006d0 Feb 1 01:16:10 pioneer kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Feb 1 01:16:10 pioneer kernel: DR6: ffff0ff0 DR7: 00000400 Feb 1 01:16:10 pioneer kernel: [<f896a1b4>] raid1d+0x2cb/0xcf1 [raid1] Feb 1 01:16:10 pioneer kernel: [<c02bd172>] schedule_timeout+0x13/0x8d Feb 1 01:16:10 pioneer kernel: [<c0104988>] apic_timer_interrupt+0x28/0x30 Feb 1 01:16:10 pioneer kernel: [<f89b1857>] md_thread+0xb9/0xcf [md_mod] Feb 1 01:16:10 pioneer kernel: [<c013548d>] autoremove_wake_function+0x0/0x35 Feb 1 01:16:10 pioneer kernel: [<f89b179e>] md_thread+0x0/0xcf [md_mod] Feb 1 01:16:10 pioneer kernel: [<c01353c6>] kthread+0x38/0x5e Feb 1 01:16:10 pioneer kernel: [<c013538e>] kthread+0x0/0x5e Feb 1 01:16:10 pioneer kernel: [<c0104b17>] kernel_thread_helper+0x7/0x10 Feb 1 01:16:10 pioneer kernel: ======================= Feb 1 01:16:58 pioneer kernel: BUG: soft lockup - CPU#1 stuck for 11s! [md0_raid1:1207] and so on Although scaring, the messages stopped after a few ours, and the box is still up. The raid config is as follows: pioneer:~# cat /etc/mdadm/mdadm.conf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root ARRAY /dev/md0 devices=/dev/sda3,/dev/sdb2 ARRAY /dev/md1 devices=/dev/sda5,/dev/sdb3 I can submit further info on request. regards, Pedro -- Package-specific info: ** Version: Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.7) (da...@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Dec 2 07:56:33 UTC 2008 ** Command line: root=/dev/sda2 ro ** Not tainted ** Kernel log: [<c02bd172>] schedule_timeout+0x13/0x8d [<c013559b>] prepare_to_wait+0xd/0x49 [<f89b1857>] md_thread+0xb9/0xcf [md_mod] [<c013548d>] autoremove_wake_function+0x0/0x35 [<f89b179e>] md_thread+0x0/0xcf [md_mod] [<c01353c6>] kthread+0x38/0x5e [<c013538e>] kthread+0x0/0x5e [<c0104b17>] kernel_thread_helper+0x7/0x10 ======================= BUG: soft lockup - CPU#0 stuck for 11s! [md1_raid1:1212] Pid: 1212, comm: md1_raid1 Not tainted (2.6.24-etchnhalf.1-686 #1) EIP: 0060:[<c01e23ad>] EFLAGS: 00000246 CPU: 0 EIP is at memcmp+0x12/0x22 EAX: 00000000 EBX: e8b82a7d ECX: eb142a7d EDX: 00000000 ESI: 00000583 EDI: 00000048 EBP: d91ba680 ESP: dfa39ec4 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7aa707c CR3: 1f809000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<f896a1b4>] raid1d+0x2cb/0xcf1 [raid1] [<c011da32>] update_curr+0x62/0xef [<c012937c>] irq_exit+0x53/0x6b [<c02bd172>] schedule_timeout+0x13/0x8d [<c013559b>] prepare_to_wait+0xd/0x49 [<f89b1857>] md_thread+0xb9/0xcf [md_mod] [<c013548d>] autoremove_wake_function+0x0/0x35 [<f89b179e>] md_thread+0x0/0xcf [md_mod] [<c01353c6>] kthread+0x38/0x5e [<c013538e>] kthread+0x0/0x5e [<c0104b17>] kernel_thread_helper+0x7/0x10 ======================= BUG: soft lockup - CPU#0 stuck for 11s! [md1_raid1:1212] Pid: 1212, comm: md1_raid1 Not tainted (2.6.24-etchnhalf.1-686 #1) EIP: 0060:[<c01e23a8>] EFLAGS: 00000206 CPU: 0 EIP is at memcmp+0xd/0x22 EAX: 00000000 EBX: dce4eb00 ECX: c85dab00 EDX: 00000000 ESI: 00000500 EDI: fffffff4 EBP: c65c4f80 ESP: dfa39ec4 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7aa707c CR3: 1f809000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<f896a1b4>] raid1d+0x2cb/0xcf1 [raid1] [<c011da32>] update_curr+0x62/0xef [<c012937c>] irq_exit+0x53/0x6b [<c02bd172>] schedule_timeout+0x13/0x8d [<c013559b>] prepare_to_wait+0xd/0x49 [<f89b1857>] md_thread+0xb9/0xcf [md_mod] [<c013548d>] autoremove_wake_function+0x0/0x35 [<f89b179e>] md_thread+0x0/0xcf [md_mod] [<c01353c6>] kthread+0x38/0x5e [<c013538e>] kthread+0x0/0x5e [<c0104b17>] kernel_thread_helper+0x7/0x10 ======================= md: md1: data-check done. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda5 disk 1, wo:0, o:1, dev:sdb3 usb 5-7: new high speed USB device using ehci_hcd and address 5 usb 5-7: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 5:0:0:0: Direct-Access Generic External 2.02 PQ: 0 ANSI: 4 sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 21 00 00 00 sd 5:0:0:0: [sdc] Assuming drive cache: write through sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 21 00 00 00 sd 5:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sdc2 sd 5:0:0:0: [sdc] Attached SCSI disk UDF-fs: No partition found (1) UDF-fs: No partition found (1) ISOFS: Unable to identify CD-ROM format. ISOFS: Unable to identify CD-ROM format. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdc1. FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdc1. NTFS-fs warning (device sdc1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS-fs error (device sdc1): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc1): ntfs_fill_super(): Not an NTFS volume. NTFS-fs error (device sdc1): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc1): ntfs_fill_super(): Not an NTFS volume. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: can't find a HFS filesystem on dev sdc1. hfs: can't find a HFS filesystem on dev sdc1. kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ** Loaded modules: Module Size Used by ip6table_filter 2880 1 ip6_tables 14340 1 ip6table_filter iptable_raw 2464 0 xt_policy 3616 16 ipt_ULOG 8964 0 ipt_TTL 2368 0 ipt_ttl 1984 0 ipt_SAME 2464 0 ipt_REDIRECT 2176 0 ipt_recent 8984 0 ipt_owner 2080 0 ipt_NETMAP 2144 0 ipt_MASQUERADE 3872 0 ipt_iprange 1888 0 ipt_ECN 2976 0 ipt_ecn 2304 0 ipt_CLUSTERIP 8292 0 ipt_ah 1984 0 ipt_addrtype 1952 0 xt_pkttype 1984 4 xt_physdev 2672 0 xt_NFQUEUE 2048 0 xt_MARK 2368 0 xt_mark 1952 0 xt_mac 1984 0 xt_length 2048 0 xt_helper 2688 0 xt_dccp 3396 0 xt_CONNMARK 3328 0 xt_connmark 2464 0 xt_CLASSIFY 1952 0 nfnetlink 4984 0 hfs 44868 0 hfsplus 74340 0 nls_iso8859_1 4224 4 ntfs 205824 0 vfat 12384 0 fat 48924 1 vfat isofs 33028 0 zlib_inflate 14496 1 isofs nls_utf8 2176 4 udf 78020 0 usb_storage 77632 1 cpufreq_ondemand 8620 2 ppdev 8900 0 parport_pc 26340 0 lp 11204 0 parport 34472 3 ppdev,parport_pc,lp ac 6212 0 battery 13700 0 ipv6 242212 40 xt_tcpudp 3264 52 ipt_TOS 2336 0 ipt_tos 1728 0 xt_TCPMSS 4544 0 xt_tcpmss 2336 0 ipt_LOG 6176 12 ipt_REJECT 4608 4 iptable_nat 7044 0 nf_nat 18700 5 ipt_SAME,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,iptable_nat iptable_mangle 2880 1 iptable_filter 3040 1 xt_multiport 3200 12 xt_state 2528 14 xt_limit 2720 0 xt_conntrack 2880 0 nf_conntrack_ftp 9056 0 nf_conntrack_ipv4 17544 16 iptable_nat nf_conntrack 62656 11 ipt_MASQUERADE,ipt_CLUSTERIP,xt_helper,xt_CONNMARK,xt_connmark,iptable_nat,nf_nat,xt_state,xt_conntrack,nf_conntrack_ftp,nf_conntrack_ipv4 ip_tables 13316 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filter x_tables 14372 42 ip6_tables,xt_policy,ipt_ULOG,ipt_TTL,ipt_ttl,ipt_SAME,ipt_REDIRECT,ipt_recent,ipt_owner,ipt_NETMAP,ipt_MASQUERADE,ipt_iprange,ipt_ECN,ipt_ecn,ipt_CLUSTERIP,ipt_ah,ipt_addrtype,xt_pkttype,xt_physdev,xt_NFQUEUE,xt_MARK,xt_mark,xt_mac,xt_length,xt_helper,xt_dccp,xt_CONNMARK,xt_connmark,xt_CLASSIFY,xt_tcpudp,ipt_TOS,ipt_tos,xt_TCPMSS,xt_tcpmss,ipt_LOG,ipt_REJECT,iptable_nat,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables dm_snapshot 17060 0 eeprom 7312 0 softdog 6068 2 tcp_diag 1888 0 inet_diag 12328 1 tcp_diag cpufreq_userspace 4388 0 p4_clockmod 5476 0 speedstep_lib 5412 1 p4_clockmod freq_table 4544 2 cpufreq_ondemand,p4_clockmod loop 16996 0 serio_raw 6788 0 i2c_i801 9456 0 pcspkr 3264 0 rtc 13148 0 i2c_core 22656 2 eeprom,i2c_i801 iTCO_wdt 11396 0 psmouse 36656 0 i3000_edac 5800 0 edac_core 42284 3 i3000_edac button 8528 0 st 35676 0 evdev 11200 2 ext3 123368 6 jbd 43892 1 ext3 mbcache 8480 1 ext3 raid1 22336 2 md_mod 73652 3 raid1 dm_mirror 21792 0 dm_mod 56004 2 dm_snapshot,dm_mirror ide_cd 36352 0 cdrom 32672 1 ide_cd sd_mod 27296 12 generic 4484 0 [permanent] piix 7556 0 [permanent] ide_core 108740 3 ide_cd,generic,piix osst 49820 0 usbhid 28032 0 hid 34400 1 usbhid ata_generic 7556 0 ata_piix 17380 8 aic7xxx 157784 0 scsi_transport_spi 22976 1 aic7xxx libata 144560 2 ata_generic,ata_piix ehci_hcd 32556 0 uhci_hcd 23568 0 scsi_mod 141516 7 usb_storage,st,sd_mod,osst,aic7xxx,scsi_transport_spi,libata tg3 89316 0 usbcore 127724 5 usb_storage,usbhid,ehci_hcd,uhci_hcd thermal 16092 0 processor 36840 1 thermal fan 4868 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation E7230 Memory Controller Hub [8086:2778] Subsystem: Dell Unknown device [1028:01df] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation E7230 PCI Express Root Port [8086:2779] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: efe00000-efefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: efd00000-efdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: efc00000-efcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 4: I/O ports at ff80 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ff60 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 20 Region 4: I/O ports at ff40 [size=32] 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 21 Region 4: I/O ports at ff20 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Unknown device [1028:01df] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efa00000-efbfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fec0 [size=16] Region 5: Memory at effffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ece0 [size=32] 04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02) Subsystem: Dell Unknown device [1028:01df] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 219 Region 0: Memory at efcf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 05:02.0 SCSI storage controller [0100]: Adaptec AIC-7861 [9004:6178] (rev 03) Subsystem: Adaptec AHA-2940AU Single [9004:7861] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at d800 [disabled] [size=256] Region 1: Memory at efaef000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at efa20000 [disabled] [size=64K] Capabilities: <access denied> 05:07.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA]) Subsystem: Dell Unknown device [1028:01df] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at dc00 [size=256] Region 2: Memory at efaf0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at efa00000 [disabled] [size=128K] Capabilities: <access denied> -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-etchnhalf.1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on: ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends: ii libc6-i686 2.3.6.ds1-13etch8 GNU C Library: Shared libraries [i -- debconf information excluded
--- End Message ---
--- Begin Message ---On Tue, 2009-02-03 at 17:21 -0200, pedro gapski wrote: > Package: linux-image-2.6.24-etchnhalf.1-686 > Version: 2.6.24-6~etchnhalf.7 I'm sorry we didn't respond to this bug report sooner. It seems to have been missed due to subsequent renaming of packages. > Severity: grave > Justification: causes non-serious data loss You did not explain this, so I assume that there was really no data loss. > kernel logs were filled with the following messages: > Feb 1 01:06:01 pioneer kernel: md: data-check of RAID array md0 > Feb 1 01:06:01 pioneer kernel: md: minimum _guaranteed_ speed: 1000 > KB/sec/disk. > Feb 1 01:06:01 pioneer kernel: md: using maximum available idle IO bandwidth > (but not more than 200000 KB/sec) for data-check. > Feb 1 01:06:01 pioneer kernel: md: delaying data-check of md1 until md0 has > finished (they share one or more physical units) > Feb 1 01:06:44 pioneer kernel: BUG: soft lockup - CPU#0 stuck for 11s! > [md0_raid1:1207] [...] This error message seems to have been incorrect, and I believe it no longer appears during RAID rebuilds. Ben. -- Ben Hutchings For every action, there is an equal and opposite criticism. - Harrisonsignature.asc
Description: This is a digitally signed message part
--- End Message ---